RC for battery locos
- hussra
- Trainee Driver

- Posts: 872
- Joined: Tue Jul 28, 2009 2:06 pm
RC for battery locos
There seem to be an awful lot of different speed controllers out there for battery locos: Roundhouse Electroglyde, Mtroniks, Electronize, RCS, AnDel, Timpdon, the list goes on I am sure.
I'm considering possibly RC'ing my IP-based diesel at some point in the future (but not before Stoneleigh, don't panic!) - any comments on any of these options, or alternatives?
I'm considering possibly RC'ing my IP-based diesel at some point in the future (but not before Stoneleigh, don't panic!) - any comments on any of these options, or alternatives?
Richard Huss
in sunny Solihull
in sunny Solihull
-
Sir haydn
- hussra
- Trainee Driver

- Posts: 872
- Joined: Tue Jul 28, 2009 2:06 pm
Thanks for that - what sort of issues have you had with the Mac5's?
I knew I'd miss something off the list! Add the Brian Jones Mac5 and Cliff Barker options to the earlier set.
I knew I'd miss something off the list! Add the Brian Jones Mac5 and Cliff Barker options to the earlier set.
Richard Huss
in sunny Solihull
in sunny Solihull
-
Sir haydn
- Steven.T
- Fireman

- Posts: 410
- Joined: Sun Mar 13, 2011 5:56 pm
- Location: Stockton
- hussra
- Trainee Driver

- Posts: 872
- Joined: Tue Jul 28, 2009 2:06 pm
Will be interested to hear how you get on with it in the loco.ste234:50856 wrote:I've used M'troniks on a R/C boat before and they perform great, so I have bought there Loco one for mine, I can't believe how small it is!
The Roundhouse unit looks very similar to the Mtroniks, but with the addition of a directional lighting circuit - can anyone confirm?
Richard Huss
in sunny Solihull
in sunny Solihull
- Steven.T
- Fireman

- Posts: 410
- Joined: Sun Mar 13, 2011 5:56 pm
- Location: Stockton
- Steven.T
- Fireman

- Posts: 410
- Joined: Sun Mar 13, 2011 5:56 pm
- Location: Stockton
- Steven.T
- Fireman

- Posts: 410
- Joined: Sun Mar 13, 2011 5:56 pm
- Location: Stockton
Ran the loco today using the a 40mhz system, it ran perfectly fine, the cruise control on the speed controller is a big help, just turn the transmitter off, and the loco carries on, saves holding the stick all the time
It's so easy to set up aswell, just push the little button on the ESC within 2 seconds of power-up, push the throttle lever fully up, a loght comes on on the ESC, then into fully reverse, and you are ready to go
Ste
It's so easy to set up aswell, just push the little button on the ESC within 2 seconds of power-up, push the throttle lever fully up, a loght comes on on the ESC, then into fully reverse, and you are ready to go
Ste
Who is online
Users browsing this forum: No registered users and 22 guests