Flash will be here soon !
-
swiftsixteen
Flash will be here soon !
Hi Guys,
I'm hoping to have this new fan powered loco finished by next weekend.
I can't wait, the testbed is such a scream to drive !!!!!
All the main carving was finished today. It is now in auto grade filler primer ready for it's first finished flat coat before moulding.
http://www.swiftsixteen.com/productDeta ... oductID=86
Thanks,
Rob.
I'm hoping to have this new fan powered loco finished by next weekend.
I can't wait, the testbed is such a scream to drive !!!!!
All the main carving was finished today. It is now in auto grade filler primer ready for it's first finished flat coat before moulding.
http://www.swiftsixteen.com/productDeta ... oductID=86
Thanks,
Rob.
- sstjc
- Fireman

- Posts: 442
- Joined: Mon Dec 22, 2008 10:47 am
- Location: Faversham Kent
- Contact:
Well as this narrow gauge stuff throws up some real strange stuff both model and prototype i don't see any issue with this and as it happens i like it. eg There have been a number of sail powered contraptions used on the full size railways http://www.railwaysofthefarsouth.co.uk/ ... ilway.html
I also applaud anything that is fun, a bit off the wall or just plain crazy because they stop us from taking life too seriously and quite often, like this fan powered contraption, allow those that are not adept at steam stuff have a go. Anyway i'm sure there is a prototype for a fan powered machine on rails somewhere but I can't find it at the moment but i'm sure someone will come up with a link.
So I applaud swiftsixteen for doing something a bit different and I hope he will bring out some more 'different' stuff !
I also applaud anything that is fun, a bit off the wall or just plain crazy because they stop us from taking life too seriously and quite often, like this fan powered contraption, allow those that are not adept at steam stuff have a go. Anyway i'm sure there is a prototype for a fan powered machine on rails somewhere but I can't find it at the moment but i'm sure someone will come up with a link.
So I applaud swiftsixteen for doing something a bit different and I hope he will bring out some more 'different' stuff !
- Steven.T
- Fireman

- Posts: 410
- Joined: Sun Mar 13, 2011 5:56 pm
- Location: Stockton
-
swiftsixteen
- GTB
- Driver

- Posts: 1712
- Joined: Sat Mar 05, 2011 2:46 pm
- Location: Australia
If it isn't a train, then neither is a single unit railcar......swiftsixteen:89839 wrote:No, you are right, it's a locomotive / engine.
As usual, there's a prototype for everything, even if it wasn't ng.
http://en.wikipedia.org/wiki/File:Schie ... lrampe.jpg
.....or the US contribution, the stealth railcar.
http://thecontaminated.com/wp-content/u ... -train.jpg
..... and of course anything the degenerate capitalists could do, the soviet worker could do better.
http://en.wikipedia.org/wiki/File:ER22.png
Did you have one of these as a kid by any chance, Peter?
http://tri-angrailways.org.uk/battleturbo.htm
Graeme
-
swiftsixteen
Flash is a locomotive-engine defined by the fact that I hooked up a rake of Binnie tipper wagons to the test bed and it pulled them around my railway. The point will be further driven home when I release the coaches for it.GTB:89855 wrote:If it isn't a train, then neither is a single unit railcar......swiftsixteen:89839 wrote:No, you are right, it's a locomotive / engine.![]()
As usual, there's a prototype for everything, even if it wasn't ng.
http://en.wikipedia.org/wiki/File:Schie ... lrampe.jpg
.....or the US contribution, the stealth railcar.
http://thecontaminated.com/wp-content/u ... -train.jpg
..... and of course anything the degenerate capitalists could do, the soviet worker could do better.
http://en.wikipedia.org/wiki/File:ER22.png
Did you have one of these as a kid by any chance, Peter?
http://tri-angrailways.org.uk/battleturbo.htm
Graeme
-
swiftsixteen
http://www.swiftsixteen.com/productDeta ... oductID=86
The first Flash body and hoop a have come out the moulds now, pictures on the site
Chassis to come tomorrow along with pictures of the lipo strap.
Thanks,
Rob.
The first Flash body and hoop a have come out the moulds now, pictures on the site
Chassis to come tomorrow along with pictures of the lipo strap.
Thanks,
Rob.
- Chris Cairns
- Driver

- Posts: 2372
- Joined: Mon Oct 29, 2007 7:25 pm
- Location: Glasgow, Scotland
-
swiftsixteen
-
OLD.GUY
-
swiftsixteen
-
OLD.GUY
-
railwaygardener
Wondered what the servo was for, until I saw the brake... Any loco that needs such a device must be worth buying!
One query, I have invested in a multitude of NiMH batteries and chargers over the years, does a Li-Po system offer significant advantages in this application, or can I use what I already have?
Derek
One query, I have invested in a multitude of NiMH batteries and chargers over the years, does a Li-Po system offer significant advantages in this application, or can I use what I already have?
Derek
-
swiftsixteen
Hello,
I based Flash on Li-po because they have high capacity/discharge/low weight.
But, they also make small NIMH. As long as you can get a NIMH pack to fit, be light enough and be at the correct voltage for your ESC, that will be fine.
My system at 2200amps will last for hours. I think the voltage used is so low, even a 1000 pack will give good run times! This means NIMH may well work, it's more down to weight, under 190g.
Hope that helps
Rob.
I based Flash on Li-po because they have high capacity/discharge/low weight.
But, they also make small NIMH. As long as you can get a NIMH pack to fit, be light enough and be at the correct voltage for your ESC, that will be fine.
My system at 2200amps will last for hours. I think the voltage used is so low, even a 1000 pack will give good run times! This means NIMH may well work, it's more down to weight, under 190g.
Hope that helps
Rob.
- tom_tom_go
- Driver

- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Who is online
Users browsing this forum: No registered users and 17 guests
