Railway Crests

Anything related to the garden railway world that is not catered for in another board
DolwyddelanLightRail

Railway Crests

Post by DolwyddelanLightRail » Tue Mar 09, 2010 9:52 am

In have finally had some spare time to create the crest for the D&FGR, and i have come down to 2 conclusions, here they are:

1. Image

2. Image

I am going to add a photo of H.G.Butler in the middle, i don't know what angle or anything as of yet, i just need to get a better photo really. Is there anything that you guys would say to change on these?

Thanks :D

Sir haydn

Post by Sir haydn » Tue Mar 09, 2010 10:13 am

Nice, scrap the date at the top, this will really pi$$ you off in years to come when its not 2010 ;)

DolwyddelanLightRail

Post by DolwyddelanLightRail » Tue Mar 09, 2010 10:22 am

I was thinking of getting rid of it, but I have originally intended for it to be created for the 20th "anniversary" of the railway, and i'm having several special "events" on throughout the year to celebrate this. :D

I i actually manage to be able to put this on the rolling stock/locos, then i probably will get rid of the date so i don't have to replace them at a later date

ptlrcecil

Post by ptlrcecil » Tue Mar 09, 2010 1:42 pm

I agree with scrap the date but perhaps put the company initials up there instead.
Just a thought.

DolwyddelanLightRail

Post by DolwyddelanLightRail » Tue Mar 09, 2010 3:33 pm

Hmm, that is a good, idea.

I'll have a play around with it later on when i next get some spare time! :D

taliesin001

Post by taliesin001 » Tue Mar 09, 2010 3:48 pm

Very nice, how about having some intertwinned lettering inside instead of a picture. Depending on era older companies wouldn't have had a photograph.

SillyBilly

Post by SillyBilly » Tue Mar 09, 2010 4:53 pm

I'd scrap the date thing too.
Why are their two different initials at the bottom.
Apart from that I'd leave it, I think a photo of a loco would be a step down.

DolwyddelanLightRail

Post by DolwyddelanLightRail » Tue Mar 09, 2010 5:17 pm

I did think of some older lettering, as it is meant to be based in the 1930's (ish), and the railway originally built in the mid-latish 1800's

The DLR&G initials is going to take a bit of explaining, but here goes:

Supposedly in mid 2009, the Dolwyddelan & Fron Goch Railway (D&FGR) joined hands with the Suchnant & Conwy Railway (S&CR) and the Essex and East London Railway (EELR) so they could get themselves all more well known with advertisement etc etc. They called themselves "The Dolwyddelan Light Railways & Gauges" (The DLR&G Railways) The gauges represents all the different gauges they are all on (D&FGR = SM32, S&CR=OO, EELR=N) and it's on there to say that it's a member of it etc.

Sorry If I've bored you all to death about all that or made you even more confused! :lol:

If you are intersted in the full story there is a bit on my website in "History of the D&FGR".If i ever do crests for the other railways they will also have the DLR&G on it as well.


Thanks for the feedback, as i said i'll have a play around with it and see what i end up with :D

Merddin Emrys

Post by Merddin Emrys » Tue Mar 09, 2010 5:26 pm

Looks great, could you swap the date for a company motto, in Welsh?

taliesin001

Post by taliesin001 » Tue Mar 09, 2010 5:37 pm

I know it's what most welsh railways use, but you could incorporate the prince of wales feathers somewhere?

DolwyddelanLightRail

Post by DolwyddelanLightRail » Tue Mar 09, 2010 5:49 pm

Merddin Emrys wrote:Looks great, could you swap the date for a company motto, in Welsh?
Never really thought of that, but i've never really thought of a motto for the railway before! Need to get thinking! :D
taliesin001 wrote:I know it's what most welsh railways use, but you could incorporate the prince of wales feathers somewhere?
I would like to do that, but that will take a looooooooong time to get within a near enough standard for my liking, or for it to be recognisable! But i may give it a try :D

DolwyddelanLightRail

Post by DolwyddelanLightRail » Tue Mar 09, 2010 5:55 pm

Here is my newer one, heres a little quiz:

which railway crest have i nicked the wraped belt off? :lol:

Image

(ignore all the stuff to the side, i forgot to get rid of them!)

taliesin001

Post by taliesin001 » Tue Mar 09, 2010 6:18 pm

Aren't there loads of railways that use the belt? such as ffestiniog, talyllyn,welshpoola nd llanfair, lynton and barnstaple etc

DolwyddelanLightRail

Post by DolwyddelanLightRail » Tue Mar 09, 2010 6:28 pm

Hmmm, just realised that they do :? woops, but anyway, i have got it really close to the old GNER crest (which in my opinion is really good :) )

But i also think the belt makes it look slightly better as well! :D

taliesin001

Post by taliesin001 » Tue Mar 09, 2010 6:39 pm

Yep, the belt is definately an improvement. :D

User avatar
Dr. Bond of the DVLR
Retired Director
Retired Director
Posts: 4516
Joined: Tue Jun 09, 2009 9:43 pm
Location: Suffolk
Contact:

Post by Dr. Bond of the DVLR » Tue Mar 09, 2010 7:54 pm

Hmm, I don't have a belt just railway initials.... Is it important to have a crest?
Image
The railway which people forgot
(to build)

DolwyddelanLightRail

Post by DolwyddelanLightRail » Tue Mar 09, 2010 7:59 pm

I would rather a crest, currently 1/3 way though the feathers now

What i would love to do is when i re-paint Britomart and add nameplates etc to Phoenix, i would love to add the crest on as well, makes it look more personalised as well! :D

mhlr
Retired Director
Retired Director
Posts: 4336
Joined: Sun Oct 21, 2007 8:16 pm
Location: Shropshire, England

Post by mhlr » Tue Mar 09, 2010 11:59 pm

Looks great! When I did mine, I couldn't be ar**ed, so I just copied some random white round belt crest off the internet and put the name on it. :lol:
Image

DolwyddelanLightRail

Post by DolwyddelanLightRail » Wed Mar 10, 2010 8:26 am

lol, surprisingly, believe it or not, the total time i have spent on it so far is about 2 1/2 hours! It isn't that hard really, if you know what your doing with the software! :lol:

ptlrcecil

Post by ptlrcecil » Tue Mar 16, 2010 1:11 pm

However I suspect the time taken o get familiar with the software is 2 1/2 years LOL.

Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests