Vale of Fairway

[ge_rik]

Not missed much Rik - man builds shed.

But what a shed.........!!

Rik

[tom_tom_go]

Why don't you do fifty sheds of grey for your next project?

[Peter Butler]

Why don't you do fifty sheds of grey for your next project?

Already been done..... have you seen the book?

[bazzer42]

Pixlr_20180108075538413.jpg (197.87 KiB) Viewed 8027 times

Does this suit? My p.a. (when I worked) avidly read the books and gave me this one birthday or Christmas

Again she moaned as she caught sight of his work bench mess.....

Need to stain that wood and hang a door.

[tom_tom_go]

There was me thinking I had coined a great joke there.

[LNR]

I thought you had too, Tom. But I think you've been topped.
Grant.

[Peter Butler]

There was me thinking I had coined a great joke there.

Perhaps you should get out more Tom?

[Big Jim]

A book on sheds.....
Only as long as there are scratch and sniff panels on it to give the complete experience.

[bazzer42]

20180109_195705.jpg (208.66 KiB) Viewed 7610 times

If this was scratch and sniff it would be Ronseal Dark brown preservative. Need to build a bolt for the dolls house latch before fitting the hinges. The bricks have had a bit of a work over with humbrol rust weathering powder.

[FWLR]

Great job Derek, love it.

[bazzer42]

20180117_202954.jpg (190.94 KiB) Viewed 7442 times

20180117_205425.jpg (186.37 KiB) Viewed 7442 times

Well the shed did get finished with a dolls house latch and some more glue and adhesive to give a concrete floor look.

Time to kick start the engine shed. Decided to horizontal clad the shed but thought a layer of bricks at the base might keep the timber from standing in damp. This is going to be an interesting build as the overall building is too large for my work bench....build when Mrs B is at work?

[LNR]

Door latch is the icing on the cake. Very nice secure looking shed.
Grant.

[philipy]

the overall building is too large for my work bench....build when Mrs B is at work?

I have that problem too. The kitchen worktop forms a handy substitute.

[bazzer42]

the overall building is too large for my work bench....build when Mrs B is at work?

I have that problem too. The kitchen worktop forms a handy substitute.

Ironically I have a kitchen worktop to work on but thought it clever to add 6" of shelving against the wall. Must check the width of my bridge building bench for size

[bazzer42]

Pixlr_20180120082354818.jpg (150.44 KiB) Viewed 7365 times

When I said horizontal it very soon became vertical! The central window placing gave a perfect fit for four vertical boards on the first corner of the building so bowed to the inevitable. I originally measured the foamboard and cut it with vertical boards in mind so maybe my measuring wasn't so far out. It means I can use the chop saw for the angle cuts. I will clad the extension before gluing the whole build together.

I have scored the inner walls to represent planking but probably won't be adding lot of detail so good enough for the 10 foot rule.

[tom_tom_go]

Looks bang on to me.

[FWLR]

Looks very interesting Derek, what do you use for your’e cladding please.

On Peter Butler’s thread I have mentioned not been motivated to do anything, but after seeing your’s and Peter’s I am going to have a go at something, maybe not up to both of you two and other members standards, but I am differently going to have a go at something.

[bazzer42]

Hi Rod, hope you are feeling a bit better.

The cladding is 4mm x 19mm from B and Q, although they may be winding down there stocks as I have had all the straight lengths in Gloucester and Cwmbran only had short lengths at reduced price . I will soak them in a dark brown Ronseal before sticking with Gripfill solvent style adhesive (pink insolvent was a disaster elsewhere).

It has been a bit of a puzzle trying to plan where to start with the cladding to ensure I get a full length on the narrow front entrance piece. In addition, the sheer size of the building has made it difficult to glue together and then clad it as the structure won't have any strength until the sub roof goes on (artificial roof slate for weight). At least that's how I see it but time will prove me right or wrong!

[FWLR]

Thanks Derek for your’e reply it’s very helpful.
Will have to get down to B & Q and have a look...

Feeling a bit better, just a little episode with the heart again, don’t really want to go in and have another operation, but they have altered one of my tablets to slightly more (+ Half) so will have to see how it goes. Thank You.

[bazzer42]

Not quite the speed of a Butler but some progress on the shed. Each piece of wood is getting a dunking in Ronseal so this was never going to be quick. The Gripfill is sticking well. Wood for the doors is on order but still need to work out the centre post affair. The top needs a trim as I found it slightly difficult (euphemism for blody nigh impossible) to cut to size and at an angle with the chop saw.

If you live near a B and Q there seems to be some odd tool clearances going on..steel rulers 50p, extending tapes £1. If we weren't borassic after Christmas I would have spent a fortune on set squares but instead stocked up on the 4mm pine strips that are also being cleared out

20180124_201956.jpg (196.79 KiB) Viewed 7274 times