GRS L&B coaches painting

Do you have a problem? Here is the place to appeal for help
Post Reply
martin.retired

GRS L&B coaches painting

Post by martin.retired » Thu May 29, 2014 10:31 am

Hi all,

Several years ago I built a couple of GRS L&B coaches. My first attempt at kit building in 40 years, so quite a learning experience.
After years of happily running them I now feel to need to re-paint them.
Anyone familiar with these coaches will know that the window glazing is a fundamental part of the construction so can't be removed for painting. I'm after ideas for a quick way of masking off the window panels. Being naturally lazy, the prospect of cutting out many window shaped pieces of masking tape is a barrier to starting the job.
Any fiendishly clever solutions would be most welcome.

User avatar
andymctractor
Trainee Driver
Trainee Driver
Posts: 712
Joined: Fri Feb 01, 2013 12:03 am
Location: Suffolk, UK
Contact:

Post by andymctractor » Thu May 29, 2014 10:49 am

If you have a steady hand, good quality paint brushes and paint, together with a patient mind you might be tempted to hand paint round the windows one at a time.
Alternatively, if you spend a bit more than usual and buy Tamiya Masking Tape and new knife blades you might be more successful. This stuff pushes into holes and corners and over minor raised areas and sticks well. Once in place a careful use of the knife could leave your windows clear of the paint you apply to the coach sides. I've used Tamiya Masking Tape before but not for masking windows.
Alternatively again, run the coaches as old condition and heavily weather the chipped bits. :shock:

Hope this helps
Regards
Andy McMahon

If it moves, salute it.  If it doesn't move, paint it. (RN sailors basic skills course 1968)

Mike PVLR

Post by Mike PVLR » Thu May 29, 2014 10:53 am

If it's still available humbrol maskol is good as well. It's a liquid mask and once u finish painting it just pulls off. I tend to use it were I can't get the masking tape in.

User avatar
andymctractor
Trainee Driver
Trainee Driver
Posts: 712
Joined: Fri Feb 01, 2013 12:03 am
Location: Suffolk, UK
Contact:

Post by andymctractor » Thu May 29, 2014 11:17 am

Mike PVLR:101178 wrote:If it's still available humbrol maskol is good as well. It's a liquid mask and once u finish painting it just pulls off. I tend to use it were I can't get the masking tape in.
- and of course it would be simpler to 'paint' the maskol on a flat surface and up to the window frame than it would be to paint the frame against the window.
Regards
Andy McMahon

If it moves, salute it.  If it doesn't move, paint it. (RN sailors basic skills course 1968)

User avatar
philipy
Moderator
Moderator
Posts: 6049
Joined: Sun Jan 30, 2011 3:00 pm
Location: South Northants

Post by philipy » Thu May 29, 2014 11:50 am

Mike PVLR:101178 wrote:If it's still available humbrol maskol is good as well.
Yes, it is, I bought a bottle last week! ( Got it in an arts and crafts shop, not a model a shop, btw)
Philip

Post Reply

Who is online

Users browsing this forum: No registered users and 54 guests