Weathering Techniques
-
SpudUk
- Fireman

- Posts: 329
- Joined: Thu Feb 27, 2014 4:25 pm
- Location: Bridgend
Weathering Techniques
Hey all,
Anyone got any top tips, secrets or suggestions when it comes to weathering rolling stock?
Thanks
Chris
Anyone got any top tips, secrets or suggestions when it comes to weathering rolling stock?
Thanks
Chris
Chris Auckland
-
MDLR
- Dr. Bond of the DVLR
- Retired Director

- Posts: 4533
- Joined: Tue Jun 09, 2009 9:43 pm
- Location: Suffolk
- Contact:
Quite a lot of my stock picks up its own weathering after its been in use a few years. When ever I am painting a building I save the wash water (which is usually a merky brown/black) and use it to apply a layer of wash onto pieces of rolling stock in need of weathering. It is then wiped off so it gets into the corners and grooves. Over several applications of different colours it starts to work well. I also have a jar of rusty liquid (made by putting iron wool in a jar of salty water and leaving for a while) which is painted onto the "metal" bits. When the water evaporates it leaves a grainey rusty stain which works quite well.
Weathering needn't require a lot of difficult techniques and expensive paints!
Weathering needn't require a lot of difficult techniques and expensive paints!

The railway which people forgot
(to build)
-
laalratty
I think this is a good place to start (and part 2), but it is possibly the one thing in model railways that has the greatest number of possible techniques and ideas, plus of course in real life you will find stuff that is in every possible state from pristine to a rusting wreck.
<object width="560" height="315"><param name="movie" value="//www.youtube.com/v/dhNhhYR2x-M?version=3 ... ram><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="//www.youtube.com/v/dhNhhYR2x-M?version=3&hl=en_GB" type="application/x-shockwave-flash" width="560" height="315" allowscriptaccess="always" allowfullscreen="true"></embed></object>
<object width="560" height="315"><param name="movie" value="//www.youtube.com/v/dhNhhYR2x-M?version=3 ... ram><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="//www.youtube.com/v/dhNhhYR2x-M?version=3&hl=en_GB" type="application/x-shockwave-flash" width="560" height="315" allowscriptaccess="always" allowfullscreen="true"></embed></object>
- KjellAn
- Trainee Fireman

- Posts: 228
- Joined: Sun Nov 07, 2010 9:46 pm
- Location: Norway, Sarpsborg
- Contact:
Hello
I did learned a lot when asking this forum about weathering a RH Little John.
See this topic - How to weathering a new Roundhouse loco.
A visit to my hobbyshop - I was recommended some weathering-stuff from AK Interactive - Heavy Chipping Fluid and Rust streaks :


I did learned a lot when asking this forum about weathering a RH Little John.
See this topic - How to weathering a new Roundhouse loco.
A visit to my hobbyshop - I was recommended some weathering-stuff from AK Interactive - Heavy Chipping Fluid and Rust streaks :


Kjell Anderdal 
Livesteam 16mm on my line - the Pine Hill Railway (PHRy)
Livesteam 16mm on my line - the Pine Hill Railway (PHRy)
-
astropsidings
- Cleaner

- Posts: 24
- Joined: Wed Nov 28, 2012 2:17 pm
- Location: Salisbury
Who is online
Users browsing this forum: No registered users and 28 guests
