Locoline Wickham

90733 · Post by **90733** » Thu Feb 18, 2010 8:18 pm

Well, I've just finished my Locolines Wickham and it's not bad. I will put pics on my website soon.
The body went to together well but the chassis is a bit of a bodge.
Also just wondering what other people think of locolines kits?

Narrow Minded · Post by **Narrow Minded** » Thu Feb 18, 2010 8:59 pm

Having tackled a couple of them, I'd say that for the price they're great

You have to take your time with them, and the instructions for curving the card where necessary by "drawing it over a table edge" should really be replaced with "carefully rolling it with a rolling pin on a soft surface".

I was quite happy with my first loco (Comeng diesel), but the lessons learned meant that I'm really chuffed with my Hunslet

90733 · Post by **90733** » Thu Feb 18, 2010 9:01 pm

Ye, I don't mind building the chassis though was horrible. I'll put a pic of it up soon so you can see how much of a bodge it is

mhlr · Post by **mhlr** » Thu Feb 18, 2010 9:07 pm

Yes, locolines chassis' are horrendous

, you'd be best off replacing it with an IP Engineering budget chassis or something

.

taliesin001 · Post by **taliesin001** » Thu Feb 18, 2010 9:08 pm

I've heard mixed reviews of the locolines kits. I do like the kerr stuart kit but the main thing that would put me off would be the lack of detail and what is there is just printed on.

Dr. Bond of the DVLR · Post by **Dr. Bond of the DVLR** » Thu Feb 18, 2010 9:09 pm

I used the motor out of a wickham and mecanno and old bits of a van for my chassis!

Narrow Minded · Post by **Narrow Minded** » Thu Feb 18, 2010 9:16 pm

the main thing that would put me off would be the lack of detail and what is there is just printed on.

Very true, that's why they're "cheap" BUT you can use the printing to overlay 3D detailing

taliesin001 · Post by **taliesin001** » Thu Feb 18, 2010 9:19 pm

Narrow Minded wrote:
the main thing that would put me off would be the lack of detail and what is there is just printed on.
Very true, that's why they're "cheap" BUT

Fair point!

90733 · Post by **90733** » Thu Feb 18, 2010 9:20 pm

I wouldn't mind trying the Kerr Stuart. Might do just not yet. But I agree the bodies are good but the chassis are horrible. Like Narrow Mined 'sed you are better to use and IP one or you could try to build one out of wood or someat'.

mhlr · Post by **mhlr** » Thu Feb 18, 2010 9:59 pm

90733 wrote:Like Narrow Mined 'sed you are better to use and IP one or you could try to build one out of wood or someat'.

No, I SAID THAT!

90733 · Post by **90733** » Thu Feb 18, 2010 10:06 pm

Sorry Pete

Narrow Minded · Post by **Narrow Minded** » Thu Feb 18, 2010 10:14 pm

90733 wrote:
Like Narrow Mined 'sed

It's OK from me too, cos I agree that the chassis are the worst part! At the very LEAST replace the supplied "discs" with proper wheels, or replace the whole chassis

Garden Railway Forum

Locoline Wickham

Locoline Wickham

Who is online