North Avenue Line
- Andrew
- Moderator

- Posts: 3422
- Joined: Tue Jul 03, 2012 1:33 pm
- Location: Bristol, UK
- Contact:
Re: North Avenue Line
That's looking great, full of character... It reminds me of the Silvertown Tramway in east London, which I vaguely remember from what must have been its dying days, with rusty rolling stock on rusty sidings. I think it linked the Tate and Lyle sugar refinery and various scrapyards with the mainline... Anyway, your line is very atmospheric, thanks for the photos.
I particularly like the ballasting and ground cover, very convincing, I'd be interested to know how you've achieved the effect...
Cheers,
Andrew
I particularly like the ballasting and ground cover, very convincing, I'd be interested to know how you've achieved the effect...
Cheers,
Andrew
- Lonsdaler
- Driver

- Posts: 1519
- Joined: Tue May 20, 2014 9:50 am
- Location: North Yorkshire
Re: North Avenue Line
Lovely stuff there Jim - looking very industrial and 'Compton Down-ish' Do we have a new Peter Jones in our midst? Will it grow like topsy, and take over the whole garden? 
Phil
Sporadic Garden Railer who's inconsistencies know no bounds
My Line - https://gardenrails.org/forum/viewtopic ... 41&t=11077
Sporadic Garden Railer who's inconsistencies know no bounds
My Line - https://gardenrails.org/forum/viewtopic ... 41&t=11077
-
jim@NAL
- Driver

- Posts: 1142
- Joined: Sun Sep 23, 2012 11:01 am
- Location: haverhill suffok
Re: North Avenue Line
Thank you very much for all your comments. The track is ballased with small stones i swept off the car park at work mixed with some Cement a bit of pva and some soil .if got 2 short videos I will post another when I can find it https://youtu.be/reOWRadEBUU
-
jim@NAL
- Driver

- Posts: 1142
- Joined: Sun Sep 23, 2012 11:01 am
- Location: haverhill suffok
Re: North Avenue Line
https://youtu.be/nIAuxiSKGFE
Ok post another vid up this evening these where the first test runs so not perfect .loco needs a driver and I have a smoke unit to put in it
Ok post another vid up this evening these where the first test runs so not perfect .loco needs a driver and I have a smoke unit to put in it
- FWLR
- Driver

- Posts: 4588
- Joined: Sat Aug 05, 2017 9:45 am
- Location: Preston, Lancashire, UK
Re: North Avenue Line
Very good Jim, love that brute of a loco.
Very hard to video and drive at the same time isn’t it……
Very hard to video and drive at the same time isn’t it……
ROD
Life is so easy when I run my trains.










https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
-
jim@NAL
- Driver

- Posts: 1142
- Joined: Sun Sep 23, 2012 11:01 am
- Location: haverhill suffok
Re: North Avenue Line
https://youtu.be/mHhVkZGpEv0 another video
- FWLR
- Driver

- Posts: 4588
- Joined: Sat Aug 05, 2017 9:45 am
- Location: Preston, Lancashire, UK
Re: North Avenue Line
Brilliant video Jim, shows your run down industries in brilliant detail 
ROD
Life is so easy when I run my trains.










https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
-
jim@NAL
- Driver

- Posts: 1142
- Joined: Sun Sep 23, 2012 11:01 am
- Location: haverhill suffok
Re: North Avenue Line
Thank you not great with technology but iv found a way of uploading videos too you tube on my phone
-
jim@NAL
- Driver

- Posts: 1142
- Joined: Sun Sep 23, 2012 11:01 am
- Location: haverhill suffok
Re: North Avenue Line
so while I wait for part to turn up for the lighthouse from far off lands (china if you ever find something you want on e bay keep looking you may find it on ebay but from china and it will be a lot cheaper you just have to wait a few weeks) so while looking at my box of plasticard iv got a load of bits a pieces lots of leftovers etc etc .I went to the model shop and bought some more sheets and started building a rather big model this will eventually be the steel works .
- Attachments
-
- 20180717_230543.jpg (238.83 KiB) Viewed 9700 times
-
- 20180717_230533.jpg (277.28 KiB) Viewed 9700 times
-
- 20180717_230529.jpg (41.45 KiB) Viewed 9700 times
-
- 20180717_230527.jpg (247.57 KiB) Viewed 9700 times
-
- 20180717_230519.jpg (297.55 KiB) Viewed 9700 times
- Peter Butler
- Driver

- Posts: 5728
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: North Avenue Line
That is an amazing collection of odds and ends Jim, you are a brave man to put them together that way and make it work.... but you have succeeded in doing so and I am sure it will be most convincing when it's finished.
The best things in life are free.... so why am I doing this?
- IanC
- Trainee Driver

- Posts: 799
- Joined: Mon Feb 15, 2016 9:15 am
- Location: Nr. Warrington, Cheshire
Re: North Avenue Line
That's an amazing use of leftovers and oddments. I shall be interested to see the finished building.
Ian
Ian
Ian
-
jim@NAL
- Driver

- Posts: 1142
- Joined: Sun Sep 23, 2012 11:01 am
- Location: haverhill suffok
Re: North Avenue Line
Yes defiantly going to have some rust and grime .it's going to be on legs so trains can pass underneath. And some lighting too.its a very big model.
- tom_tom_go
- Driver

- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Re: North Avenue Line
It's great how you just grab bits and go for it. I fuss too much and spend ages pondering!
- FWLR
- Driver

- Posts: 4588
- Joined: Sat Aug 05, 2017 9:45 am
- Location: Preston, Lancashire, UK
Re: North Avenue Line
Going to be another brilliant big build out of bits and bobs. Rusty too…..
ROD
Life is so easy when I run my trains.










https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
-
jim@NAL
- Driver

- Posts: 1142
- Joined: Sun Sep 23, 2012 11:01 am
- Location: haverhill suffok
Re: North Avenue Line
bit of weathering started on the steelworks
- Attachments
-
- 20180803_205952.jpg (310.85 KiB) Viewed 9395 times
-
- 20180803_221835.jpg (260.74 KiB) Viewed 9395 times
-
- 20180803_221839.jpg (285.5 KiB) Viewed 9395 times
-
- 20180803_221846.jpg (303.1 KiB) Viewed 9395 times
-
- 20180803_221851.jpg (348.48 KiB) Viewed 9395 times
-
- 20180806_210651.jpg (316.72 KiB) Viewed 9395 times
-
- 20180806_210703.jpg (259.1 KiB) Viewed 9395 times
-
- 20180806_210712.jpg (254.36 KiB) Viewed 9395 times
-
jim@NAL
- Driver

- Posts: 1142
- Joined: Sun Sep 23, 2012 11:01 am
- Location: haverhill suffok
Re: North Avenue Line
sorry for some of the pics being bad I have a new phone and not used to it yet .the way iv done this is by mixing and layering wiping on and off lots of layers of paint .starting to get the effect I want now
- ge_rik
- Administrator

- Posts: 8037
- Joined: Sun Oct 25, 2009 10:20 pm
- Location: Cheshire
- Contact:
Re: North Avenue Line
Looking good.
Rik
Rik
-
bazzer42
Re: North Avenue Line
Starting to look good Jim, weathering is an art that I have yet to master. It is surprising the effects you get by wiping and washing off weathering.
Who is online
Users browsing this forum: No registered users and 15 guests