Rowland's Modules - was Joined up Thinking
-
- Cleaner
- Posts: 74
- Joined: Tue Dec 11, 2012 10:12 pm
Rowland's Modules - was Joined up Thinking
Well, the project is under way. John Wenlock completed the first standard sized baseboard on Friday and I completed the second today. One thing that has come out, is that 900mm high is a little low, and 950mm to baseboard top a better bet. Will communicate this to all who are building modules. Has anyone out there got ready access to a laser cutter, or perhaps a plasma cutting machine? I want to have templates made in plastic or 1/8th steel for marking out the curved boards. With 8 angled boards equalling a full circle, there is a lot of opportunity for error if angles are slightly askew. Best Wishes, Gareth
Last edited by Hope Mountain Railway on Sat Feb 08, 2014 9:37 pm, edited 1 time in total.
- Sir Clothem Cap
- Driver
- Posts: 1707
- Joined: Sun Sep 26, 2010 8:45 pm
- Location: Hampshire
- Contact:
-
- Cleaner
- Posts: 74
- Joined: Tue Dec 11, 2012 10:12 pm
Rowland's Modules
Thanks for that Bryan. What dims did you work too? What height from the floor. Could you send some pics? Thanks, Gareth
- Sir Clothem Cap
- Driver
- Posts: 1707
- Joined: Sun Sep 26, 2010 8:45 pm
- Location: Hampshire
- Contact:
This is a long modular railway that was built a while back by others and was based on mamod track but has been rebuilt with some hand made track to the same proportions. it is intended to modify the ends to make it a rowlands standard and alter the run round loops to allow larger stock to pass.
I'm unsure of height but will measure next time I get a chance. It has been stored a while but was revisited because of your idea.
I'm unsure of height but will measure next time I get a chance. It has been stored a while but was revisited because of your idea.
- Chris Cairns
- Driver
- Posts: 2366
- Joined: Mon Oct 29, 2007 7:25 pm
- Location: Glasgow, Scotland
Finally got the video to work after tweaking some settings in Chrome.
Not wanting to 'bungle' this Topic but that was a rather large gas burner flare up on your Mamod Mark II locomotive Bryan. Have you marked the wheel on the gas valve? I find that helps keeping a close eye of what gas setting to set.
Chris Cairns.
Not wanting to 'bungle' this Topic but that was a rather large gas burner flare up on your Mamod Mark II locomotive Bryan. Have you marked the wheel on the gas valve? I find that helps keeping a close eye of what gas setting to set.
Chris Cairns.
-
- Cleaner
- Posts: 74
- Joined: Tue Dec 11, 2012 10:12 pm
Rowlands Modules stand at Peterborough
Hello all,
I will be hosting a stand promoting the Modular layout/interface idea at the Peterborough Show, if anyone fancies coming up for a chat.
See you there, Gareth
I will be hosting a stand promoting the Modular layout/interface idea at the Peterborough Show, if anyone fancies coming up for a chat.
See you there, Gareth
-
- Cleaner
- Posts: 74
- Joined: Tue Dec 11, 2012 10:12 pm
Rowlands Modules - Stds on the Website
Hello All, just an update to say that the Stds are on the Association Website now. Hope that progress is being made? Mine slow, but gathering pace. See you all at the Show?
- MDLR
- Driver
- Posts: 4027
- Joined: Thu Jan 15, 2009 10:38 pm
- Location: Near Ripley, Derbyshire, UK
- Contact:
The MDLR's 2-module layout has made significant progress today (like joined-up baseboards with legs and railway bits dropped on it) see http://www.mdlr.co.uk/mod.html
-
- Cleaner
- Posts: 74
- Joined: Tue Dec 11, 2012 10:12 pm
Rowlands Modules - Metric
Brian, .... can you please change your post to remind those interested that the standard lengths are multiples or divisions of 1200mm, not 4' as you mentioned in the piece from your link - thanks.
-
- Cleaner
- Posts: 74
- Joined: Tue Dec 11, 2012 10:12 pm
Aldi - Bargains
For those of you sorting timber out for their Modules, there are some huge boxes of a variety of woodscrew in Aldi at the moment. A lot cheaper than B&Q etc. Also packs of small angle bracket which would be useful for strengthening.
- MDLR
- Driver
- Posts: 4027
- Joined: Thu Jan 15, 2009 10:38 pm
- Location: Near Ripley, Derbyshire, UK
- Contact:
There's a requirement in the spec for adjustable legs, so we can all be at the same level, and this seemed to be a readily-available solution. I haven't actually adjusted mine yet (apart from one which was sitting over a hollow in the garage floor - another advantage) but will have a twiddle to get somewhere within range before I pack for Peterborough.rebelego:96643 wrote:Nice! I like the use of kitchen cabinet legs.
Many years ago, I was part of a group of OO modellers who built a modular layout, using very similar principles to these current Assoc ones.
For my leg adjustment I used something called "Handwheel bolts" which were sold by Maplins in those days but are now available on line. I drilled a 10mm hole up the bottom of the legs and fitted a captive T-nut and simply screwed the bolt in.
My concern with the kitchen cabinet legs would be robustness. There is a lot of plastic and they aren't really designed to be constantly adjusted.
One other thing, we found from bitter experience how out of true the floors of big halls can be over the length of a the layout. Even with a couple of inches of adjustment, we often had to put packing underneath, so a stock of 1/2" ply offcuts frequently came in handy! ( Also for carpeted floors, it stops the feet sinking into carpets.)
For my leg adjustment I used something called "Handwheel bolts" which were sold by Maplins in those days but are now available on line. I drilled a 10mm hole up the bottom of the legs and fitted a captive T-nut and simply screwed the bolt in.
My concern with the kitchen cabinet legs would be robustness. There is a lot of plastic and they aren't really designed to be constantly adjusted.
One other thing, we found from bitter experience how out of true the floors of big halls can be over the length of a the layout. Even with a couple of inches of adjustment, we often had to put packing underneath, so a stock of 1/2" ply offcuts frequently came in handy! ( Also for carpeted floors, it stops the feet sinking into carpets.)
Philip
- MDLR
- Driver
- Posts: 4027
- Joined: Thu Jan 15, 2009 10:38 pm
- Location: Near Ripley, Derbyshire, UK
- Contact:
I might've gone down that route, but didn't have the technology to drill the holes!philipy:96677 wrote:For my leg adjustment I used something called "Handwheel bolts" which were sold by Maplins in those days but are now available on line. I drilled a 10mm hole up the bottom of the legs and fitted a captive T-nut and simply screwed the bolt in.
I'm not intending that the modules will be going out more than about 3 times a year, so I'm not over-worried about this - besides, they are easy and cheap to replace! I've got problems with a dip in the concrete garage floor, which has needed some adjustment on one leg only to get a stable structure!philipy:96677 wrote:My concern with the kitchen cabinet legs would be robustness. There is a lot of plastic and they aren't really designed to be constantly adjusted.
One other thing, we found from bitter experience how out of true the floors of big halls can be over the length of a the layout.
It's called a Black & Decker with a 10mm drill bit!MDLR:96685 wrote:I might've gone down that route, but didn't have the technology to drill the holes!philipy:96677 wrote:For my leg adjustment I used something called "Handwheel bolts" which were sold by Maplins in those days but are now available on line. I drilled a 10mm hole up the bottom of the legs and fitted a captive T-nut and simply screwed the bolt in.
Philip
- MDLR
- Driver
- Posts: 4027
- Joined: Thu Jan 15, 2009 10:38 pm
- Location: Near Ripley, Derbyshire, UK
- Contact:
Today, I feel like singing................ "The hills are alive.........." because we've got one!
Go to http://www.mdlr.co.uk/mod.html for the words and pictures:
It looks like this now!
Go to http://www.mdlr.co.uk/mod.html for the words and pictures:
It looks like this now!
- MDLR
- Driver
- Posts: 4027
- Joined: Thu Jan 15, 2009 10:38 pm
- Location: Near Ripley, Derbyshire, UK
- Contact:
I've been getting plastered in Lathkill Dale this evening............................
All the words are at: www.mdlr.co.uk/mod.html
All the words are at: www.mdlr.co.uk/mod.html
- MDLR
- Driver
- Posts: 4027
- Joined: Thu Jan 15, 2009 10:38 pm
- Location: Near Ripley, Derbyshire, UK
- Contact:
The scenic work on Lathkill Dale (for Over Haddon) is coming on nicely - see http://www.mdlr.co.uk/mod.html........................
Last edited by MDLR on Wed Apr 09, 2014 9:51 pm, edited 1 time in total.
Who is online
Users browsing this forum: No registered users and 3 guests