(WH)WHR Rolling Stock
Re: (WH)WHR Rolling Stock
I can only second what Peter has said, wonderful weathering job sets off a great build.
Grant.
Grant.
Re: (WH)WHR Rolling Stock
They look good Andrew! What's next for the workshop?
Re: (WH)WHR Rolling Stock
All will be revealed...
They won't be next, but I reckon some NWNGR/WHR slate wagons are rising up the priority list. This morning's train included a plastic Ffestiniog 2t version which bounced around a bit among the heavier wooden WHR opens and vans - I've got some metal axleboxes that I plan to use to make some slightly heftier versions...
Cheers,
Andrew
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Re: (WH)WHR Rolling Stock
Superb job on the bolster wagons.
Any issues with curves ie: what is the length with the match wagon Andrew.
Any issues with curves ie: what is the length with the match wagon Andrew.
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Re: (WH)WHR Rolling Stock
Hi Rod,
With the slate wagon in between the whole thing is just under a foot long, and it seems I'd spoken too soon when I said the set ran well - on a subsequent run there were some problems with "bow string effect" on the tighter curves (3' 6"-ish), I think because the centre of gravity's pretty high. There's not much room for more weight lower down, so I think it will just be a case of keeping the speed very low and hoping for the best when running as a three wagon set. I reckon I'll generally run the pair without the match truck anyway, which should be OK.
Cheers,
Andrew.
Re: (WH)WHR Rolling Stock
They look particularly effective. Subtly weathered and plenty of fine detail.
I especially like seeing the pair with the match truck between them. I wonder if they ever ran with two match trucks for longer loads??
Rik
I especially like seeing the pair with the match truck between them. I wonder if they ever ran with two match trucks for longer loads??
Rik
Re: (WH)WHR Rolling Stock
Hi Andrew,
Seems the weight is the main issue then, otherwise it would run well would it.
Would a flat wagon with really small wheels help, then you could possible add some weight with a heavy load like slate or even a hollow box with some led in it....
Seems the weight is the main issue then, otherwise it would run well would it.
Would a flat wagon with really small wheels help, then you could possible add some weight with a heavy load like slate or even a hollow box with some led in it....
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Re: (WH)WHR Rolling Stock
Yep - When running as a three wagon set, what weight there is seems to be too high to counteract the length on some curves. Seems OK with just the bolsters though, so not too much of a problem.
They do run OK apart from that, apart from a bit of a squeak from one axle, but I think I've been lucky and wouldn'r rush to purchase another kit with MDF axleboxes. JMORG changes his for metal ones, which is a good idea I think, but pushes up the cost...
Cheers,
Andrew
Re: (WH)WHR Rolling Stock
That should have been ( Lead ) Andrew, not flipping "led". But I guess you knew what I might...
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Re: (WH)WHR Rolling Stock
The price and quality of Lineside Hut kits are very good, especially some of their newer, high end models. The trouble I found was that the MDF axle boxes on the slate wagons don't last, mine started to fall to pieces pretty quick! We had spare IP slate wagon axle boxes so we started using them, much better in my opinion due to the weight.Andrew wrote: ↑Sat May 09, 2020 12:16 pmYep - When running as a three wagon set, what weight there is seems to be too high to counteract the length on some curves. Seems OK with just the bolsters though, so not too much of a problem.
They do run OK apart from that, apart from a bit of a squeak from one axle, but I think I've been lucky and wouldn'r rush to purchase another kit with MDF axleboxes. JMORG changes his for metal ones, which is a good idea I think, but pushes up the cost...
Cheers,
Andrew
We have their tanker using the original bogies; it runs ok as it trundles along slowly, usually behind an SVS powered Garratt.
I'll try and post some pictures up soon, been making some WHR era wagons at the moment along with more freelanced stock.
Re: (WH)WHR Rolling Stock
I'm looking forward to buying and building their model of the Curvy Roof Van at some point. It's not currently on the horizon, but I'll need to have done it by 2023, so I can recreate the opening train to celebrate the WHR centenary...
Cheers,
Andrew.
- Peter Butler
- Driver
- Posts: 5254
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: (WH)WHR Rolling Stock
Andrew, I highly recommend the 'Lineside Hut' CRV. It is cut from high quality material, is very well designed and constructed and is good value for money. You do need to supply bogies yourself, but that can be to your advantage......
The best things in life are free.... so why am I doing this?
Re: (WH)WHR Rolling Stock
The picture sells it Peter! Your version is stunning...Peter Butler wrote: ↑Sun May 10, 2020 10:20 pm Andrew, I highly recommend the 'Lineside Hut' CRV. It is cut from high quality material, is very well designed and constructed and is good value for money.
Whenever I get round to it I'm afraid mine will be in plain old "Kentish Green" with brick red ends, like most of the FfR's carriages back in the 20s! Still, it'll be quicker and easier, I guess...
Andrew.
Re: (WH)WHR Rolling Stock
Hello again,
Readers of the Inspection thread will have seen a new addition to the (WH)WHR's rolling stock - a Permanent Way trolley. The old WHR seemed to have a number of these, some powered, some hand propelled, which were attached to the back of trains to enable the PW gang to reach their work site - there's a great 1935 photo here: http://217.34.233.120:8086/zoom-item?ke ... joVWgA/852
The trolleys feature in a surprising number of photos and accounts, and seem to have been such a feature of WHR life that I've been thinking for a while that I ought to model one. I had planned to scour every photo I could find so that I could produce drawings for an accurate model, but the impending arrival of the inspector (who I thought would enjoy a trolley ride!) encouraged me to temporarily shed my rivet-counting tendencies and purchase a quick and easy Lineside Hut kit for about £6.
The figures are toys from my People Box, hacked about and glued back together in a seated position, and the crate (no doubt containing some essential PW supplies...) and rucksack (probably containing the gang's lunch...) come from the same source.
I thought it would be useful to have the option of the trolley as a small flat wagon too, so made an alternate load as well. I've had these since I was about five, when they trundled around the carpet behind a battery powered engine on red plastic track! They could do with a coat of paint - they were last painted about 30 years ago, and the coloured plastic's beginning to show through.
The "loads", including the people, have washers glued underneath, which affix to strong magnets set into the surface of the wagon - I'll probably paint them at some stage to disguise them a little.
They're pretty powerful:
The figures don't stay put so well, so I think I'll need to swap the washers glued to their posteriors for some stronger ones - there's no dignity if you're a member of the (WH)WHR PW gang!
Cheers all,
Andrew.
Readers of the Inspection thread will have seen a new addition to the (WH)WHR's rolling stock - a Permanent Way trolley. The old WHR seemed to have a number of these, some powered, some hand propelled, which were attached to the back of trains to enable the PW gang to reach their work site - there's a great 1935 photo here: http://217.34.233.120:8086/zoom-item?ke ... joVWgA/852
The trolleys feature in a surprising number of photos and accounts, and seem to have been such a feature of WHR life that I've been thinking for a while that I ought to model one. I had planned to scour every photo I could find so that I could produce drawings for an accurate model, but the impending arrival of the inspector (who I thought would enjoy a trolley ride!) encouraged me to temporarily shed my rivet-counting tendencies and purchase a quick and easy Lineside Hut kit for about £6.
The figures are toys from my People Box, hacked about and glued back together in a seated position, and the crate (no doubt containing some essential PW supplies...) and rucksack (probably containing the gang's lunch...) come from the same source.
I thought it would be useful to have the option of the trolley as a small flat wagon too, so made an alternate load as well. I've had these since I was about five, when they trundled around the carpet behind a battery powered engine on red plastic track! They could do with a coat of paint - they were last painted about 30 years ago, and the coloured plastic's beginning to show through.
The "loads", including the people, have washers glued underneath, which affix to strong magnets set into the surface of the wagon - I'll probably paint them at some stage to disguise them a little.
They're pretty powerful:
The figures don't stay put so well, so I think I'll need to swap the washers glued to their posteriors for some stronger ones - there's no dignity if you're a member of the (WH)WHR PW gang!
Cheers all,
Andrew.
Re: (WH)WHR Rolling Stock
What a great way of fixing non permanent items to a wagon, much better than glueing them so you're stuck with them (no pun) to the rolling stock. Amazing where you can find things to add to builds, makes the saying "You never know" all the more worthwhile...
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Re: (WH)WHR Rolling Stock
Good afternoon!
Well, the next rolling stock project is underway. I think it's possibly been 5 years since I built a carriage, so it's time I did something about that - I've started work on a model of Ffestiniog Van 4, rebuilt from a full brake in 1928 and seemingly used quite a lot on the Welsh Highland, so it should look well at home in whatever rake of carriages it runs in.
Here it is - quite a characterful vehicle, I think?
And here's the first stage of my model - I haven't got very far yet!
The floor's from an old drawer, with running gear courtesy of a Big Big Train carriage, like most of my coaches. Big Big stuff is still available relatively cheaply from time to time, I find it runs very nicely, and the obvious inaccuracies are largely hidden under the carriage. The pay-off is that the floor comes out slightly high inside the carriage, but that's barely noticeable on a small-windowed compartment carriage like this one.
Sides, ends and compartment dividers next, perhaps over the next week or two, although life may get in the way...
Cheers,
Andrew.
PS The drawings show that the bogies were arranged asymmetrically, with the one at the brake end further in by several feet. I think that would've been because the original van had a balcony, incorporated into the body of the carriage during the '28 rebuild, with the bogies arranged under the former body bit rather than under the balcony. I've gone for a more conventional arrangement for a smaller overhang and so better running round my sharp curves - it'll take an eagle eye to notice!
Well, the next rolling stock project is underway. I think it's possibly been 5 years since I built a carriage, so it's time I did something about that - I've started work on a model of Ffestiniog Van 4, rebuilt from a full brake in 1928 and seemingly used quite a lot on the Welsh Highland, so it should look well at home in whatever rake of carriages it runs in.
Here it is - quite a characterful vehicle, I think?
And here's the first stage of my model - I haven't got very far yet!
The floor's from an old drawer, with running gear courtesy of a Big Big Train carriage, like most of my coaches. Big Big stuff is still available relatively cheaply from time to time, I find it runs very nicely, and the obvious inaccuracies are largely hidden under the carriage. The pay-off is that the floor comes out slightly high inside the carriage, but that's barely noticeable on a small-windowed compartment carriage like this one.
Sides, ends and compartment dividers next, perhaps over the next week or two, although life may get in the way...
Cheers,
Andrew.
PS The drawings show that the bogies were arranged asymmetrically, with the one at the brake end further in by several feet. I think that would've been because the original van had a balcony, incorporated into the body of the carriage during the '28 rebuild, with the bogies arranged under the former body bit rather than under the balcony. I've gone for a more conventional arrangement for a smaller overhang and so better running round my sharp curves - it'll take an eagle eye to notice!
- Peter Butler
- Driver
- Posts: 5254
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: (WH)WHR Rolling Stock
Good luck with that one Andrew, you have a challenge on your hands with the rounded windows and panel overlays. I'm sure it will be superb when complete. Then, and only then, can we bring up the subject of bogies!
The best things in life are free.... so why am I doing this?
Re: (WH)WHR Rolling Stock
Thanks Peter!
Luckily only the end windows are curved! I was thinking of doing them first, but might actually make the ends last - that way I'll have to persevere, even if the first attempt isn't up to scratch!
Cheers,
Andrew
Luckily only the end windows are curved! I was thinking of doing them first, but might actually make the ends last - that way I'll have to persevere, even if the first attempt isn't up to scratch!
Cheers,
Andrew
Re: (WH)WHR Rolling Stock
Good luck Andrew!
I'm amazed that these vans have never really been modelled in any of their guises, apart from Perfect World.
I'm amazed that these vans have never really been modelled in any of their guises, apart from Perfect World.
Who is online
Users browsing this forum: No registered users and 2 guests