Gauge 1 ‘project’
Re: Gauge 1 ‘project’
I always make videos too short, feels like ive been filming for ages and when I watch it back is only 10 seconds or so. I’ll get a longer one next run! Wasn’t expecting it to work fours time to be honest so pretty ‘chuffed’!
Re: Gauge 1 ‘project’
"Chuffed"
I would be too if I had the skills you process Gareth. You have done an excellent job there...![:salute: :salute:](./images/smilies/icon_salut.gif)
![:D](./images/smilies/icon_biggrin.gif)
I would be too if I had the skills you process Gareth. You have done an excellent job there...
![:salute: :salute:](./images/smilies/icon_salut.gif)
ROD
Life is so easy when I run my trains.
![🚂](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f682.svg)
![🚃](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f683.svg)
![🚃](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f683.svg)
![🚃](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f683.svg)
![🚃](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f683.svg)
![🚃](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f683.svg)
![🚃](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f683.svg)
![🚃](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f683.svg)
![🚃](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f683.svg)
![🚃](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f683.svg)
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
![:thumbright: :thumbright:](./images/smilies/icon_thumleft.gif)
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
- Old Man Aaron
- Trainee Driver
- Posts: 808
- Joined: Wed Oct 19, 2016 11:08 am
- Location: Sunshine Coast QLD, Australia
Re: Gauge 1 ‘project’
Aye, more videos in due course, please! Will be interesting to see how much it'll pull.
Regards,
Aaron - Scum Class Works
Aaron - Scum Class Works
Re: Gauge 1 ‘project’
I’ve currently got no g1 stock so will have to borrow something to pull, feels like it’s got some go though, doesn’t even flinch if you try to press against the wheels while it’s running.
Re: Gauge 1 ‘project’
'Cheeky mode' I know someone who can help with the gauge one stock. Just ask Matt as he's got some of my stuff.
Serious comment, looks great! Can't wait to hopefully see it in the flesh.
Jon
Bowaters Models:- http://www.bowatersmodels.co.uk
Current Projects:-
Rebuilding the Railway!
Turning a Second hand 'Superior' into Bowaters 'Superior'
Current Projects:-
Rebuilding the Railway!
Turning a Second hand 'Superior' into Bowaters 'Superior'
Re: Gauge 1 ‘project’
Yeah matts already offered to loan some of his stock for a test, will need some of my own stuff at some point but I’ve run out of space at home so will need to figure that bit out first!
Re: Gauge 1 ‘project’
Longer video of the second steaming after fixing a few niggles. Had a bit of trouble getting the wicks to light so thinking they may be packed a bit too tight.
Re: Gauge 1 ‘project’
Well, that is simply excellent. Nice and smooth and I love the sound it makes.
Re: Gauge 1 ‘project’
Painting turned out to be a bit of a pig, but it’s finally done, not perfect but it’ll do…
I’m sure I’ll find bits and pieces to do, but for now she’s done and ready to hit the track
I’m sure I’ll find bits and pieces to do, but for now she’s done and ready to hit the track
Re: Gauge 1 ‘project’
Lovely. Can’t wait to see the video(s).
- Old Man Aaron
- Trainee Driver
- Posts: 808
- Joined: Wed Oct 19, 2016 11:08 am
- Location: Sunshine Coast QLD, Australia
Re: Gauge 1 ‘project’
Painting's a funny thing, innit? One day it goes well, the next might be a disaster. That's come out beautifully, you ought to be proud. ![:salute: :salute:](./images/smilies/icon_salut.gif)
![:salute: :salute:](./images/smilies/icon_salut.gif)
Regards,
Aaron - Scum Class Works
Aaron - Scum Class Works
Re: Gauge 1 ‘project’
It really is, some bits came out spot on straight from the can, others needed much flatting and polishing to get to an acceptable point, despite the same process being used! I’m happy with it, but there’s room for improvement next time…Old Man Aaron wrote: ↑Wed Sep 22, 2021 3:10 am Painting's a funny thing, innit? One day it goes well, the next might be a disaster. That's come out beautifully, you ought to be proud.![]()
Re: Gauge 1 ‘project’
First run with the bodywork fitted, and the smokebox properly sealed up, seem to steam considerably better now. I’ve also restricted the lubricator slightly as I think it was over oiling. Ran for about 25-30 mins never going below 55psi before I stopped it to check the oil level, which was pretty much empty by then.
Re: Gauge 1 ‘project’
Can I ask how did you limit the oil flow? I have 2 Accucraft locos which seem to dispense far too much oil. If it's not a too technical fix it's one I would be interested in.
Phil
Sporadic Garden Railer who's inconsistencies know no bounds
My Line - https://gardenrails.org/forum/viewtopic ... 41&t=11077
Sporadic Garden Railer who's inconsistencies know no bounds
My Line - https://gardenrails.org/forum/viewtopic ... 41&t=11077
Re: Gauge 1 ‘project’
The project design uses a separate steam feed from the regulator to the lubricator, and then from the lubricator to the steam chest. I just reduced the size on the hole in the inlet union hoping it would reduce the amount of oil that gets through. I’ve never seen an accucraft lubricator, but I’d assume a similar theory would be applicable.
Re: Gauge 1 ‘project’
I presumed you would either have incorporated a valve of some sort, or reduced the hole size. The question for me is, how would I go about making the hole in the Accucraft lubricator smaller? (Sorry if it seems a dumb basic question, but I am not a model engineer, but I am proud that I belong to the Guild of Bodgellers :Garethh wrote: ↑Fri Oct 01, 2021 8:49 am The project design uses a separate steam feed from the regulator to the lubricator, and then from the lubricator to the steam chest. I just reduced the size on the hole in the inlet union hoping it would reduce the amount of oil that gets through. I’ve never seen an accucraft lubricator, but I’d assume a similar theory would be applicable.
![:lol:](./images/smilies/icon_lol.gif)
Phil
Sporadic Garden Railer who's inconsistencies know no bounds
My Line - https://gardenrails.org/forum/viewtopic ... 41&t=11077
Sporadic Garden Railer who's inconsistencies know no bounds
My Line - https://gardenrails.org/forum/viewtopic ... 41&t=11077
Re: Gauge 1 ‘project’
I’m not familiar with accucraft lubricators unfortunately, is it a dead leg type or steam fed? Maybe there’s a way to sleeve the existing pipe and drill a new smaller hole? Also not a true model engineer, just figuring it out as I go along, much bodging has been done!
Re: Gauge 1 ‘project’
Looking great! I know I'm talking about getting a project based SR Q class built which would be nice to see but that's for next year.
Can't wait to hopefully see it in the flesh!
Jon
Can't wait to hopefully see it in the flesh!
Jon
Bowaters Models:- http://www.bowatersmodels.co.uk
Current Projects:-
Rebuilding the Railway!
Turning a Second hand 'Superior' into Bowaters 'Superior'
Current Projects:-
Rebuilding the Railway!
Turning a Second hand 'Superior' into Bowaters 'Superior'
Re: Gauge 1 ‘project’
Hi Phil, I'm not sure where I read this, but someone on this forum or the 16mm assc. website was describing a new locomotive once and decided it was over-oiling. Pretty sure it was an Accucraft but could have been RH as well. Anyway, whoever it was said they stuck a piece of fine wire into the hole to reduce its size. Seems like a bodge-y solution to me, but on the other hand I wouldn't be above trying it.Lonsdaler wrote: ↑Fri Oct 01, 2021 11:06 am I presumed you would either have incorporated a valve of some sort, or reduced the hole size. The question for me is, how would I go about making the hole in the Accucraft lubricator smaller? (Sorry if it seems a dumb basic question, but I am not a model engineer, but I am proud that I belong to the Guild of Bodgellers :)
Re: Gauge 1 ‘project’
That sounds interesting, it crossed my mind during this build that it would be fairly easy to convert to a Q but I decided to keep it simple and stick with the 4f in the end.
Who is online
Users browsing this forum: No registered users and 4 guests