Question on using epoxy to scratch build a switch...
Posted: Sun Jul 26, 2020 6:37 pm
I would like to scratch build some switches from code 250 aluminum rail. Can I successfully use epoxy where I would normally solder?
Garden Railway Forum
An international forum for garden railway modellers in all scales and gauges. It is free to join and is funded through voluntary contributions by its members. Many thanks to all those who keep it going.
https://gardenrails.org/forum/
Question on using epoxy to scratch build a switch...
Page 1 of 1
Re: Question on using epoxy to scratch build a switch...
Posted: Mon Jul 27, 2020 8:44 am
My experience with aluminium is that it is very difficult to bond to, having said that, I am sure in this modern age somebody will know of an adhesive formulated for aluminium.
Re: Question on using epoxy to scratch build a switch...
Posted: Mon Jul 27, 2020 11:52 am
What material are you using for the sleepers?
Re: Question on using epoxy to scratch build a switch...
Posted: Tue Jul 28, 2020 9:46 pm
I had hoped to use aluminum for all parts of the switch.
Re: Question on using epoxy to scratch build a switch...
Posted: Tue Jul 28, 2020 9:56 pm
Maybe Loctite is worth a try?
Have a search through their range.
Have a search through their range.
Re: Question on using epoxy to scratch build a switch...
Posted: Thu Jul 30, 2020 11:39 pm
If you are using wood ties as I do, no need to use epoxy. On my turnouts the spikes hold everything in place. I use Code 250 aluminum rail. Although my turnouts are of the stub variety, the frog is the same as a points style turnout.
---
---
- IMG_30072020_174237_(800_x_600_pixel).jpg (172.67 KiB) Viewed 5737 times