Page 2 of 5
Re: Charles - Penrhyn Mainline Hunslet
Posted: Mon Apr 20, 2020 2:16 pm
by Old Man Aaron
That's some really professional work right there. Even your lathe is quite nice, especially compared to mine.
Re: Charles - Penrhyn Mainline Hunslet
Posted: Wed Apr 22, 2020 5:59 am
by dewintondave
Thank you lads
Re: Charles - Penrhyn Mainline Hunslet
Posted: Sun Apr 26, 2020 12:21 am
by dewintondave
Finally the frames will stand up on their own - just. Drilling and fitting the angle pieces at the moment
- rsz_img_20200426_102922.jpg (45.92 KiB) Viewed 7442 times
Re: Charles - Penrhyn Mainline Hunslet
Posted: Sun Apr 26, 2020 10:37 am
by bambuko
Nice work Dave
I am slightly confused
, because you've said before that you are not planning to have sprung axleboxes,
but looking at your last photo (too small to be totally sure) there appear to be pockets for axlebox springs?
Any chances of close up photo and clarification from you?
Re: Charles - Penrhyn Mainline Hunslet
Posted: Mon Apr 27, 2020 12:01 am
by dewintondave
Thank you!
Those are slots to pass the rod from the axle box to the leaf springs above. It's all likely to be solid as the loco could be rather lively with such overhangs if it were sprung, but we will see
Re: Charles - Penrhyn Mainline Hunslet
Posted: Fri May 01, 2020 8:39 am
by dewintondave
Re: Charles - Penrhyn Mainline Hunslet
Posted: Fri May 01, 2020 8:45 am
by tom_tom_go
Your photos are not doing your work justice.
Can you up the resolution when you resize?
Re: Charles - Penrhyn Mainline Hunslet
Posted: Fri May 01, 2020 8:46 am
by FWLR
They do look great though...
Re: Charles - Penrhyn Mainline Hunslet
Posted: Fri May 01, 2020 8:57 am
by dewintondave
I'm using my budget phone camera, I'm a lo-fi kind of guy. No studio photography here
Re: Charles - Penrhyn Mainline Hunslet
Posted: Sat May 02, 2020 12:12 am
by Hydrostatic Dazza
Nice springs, lovely stuff.
Keep feeding the pics and updates.
I now wish I had taken the trouble to make spring.
Perhaps next time.
Re: Charles - Penrhyn Mainline Hunslet
Posted: Sat May 02, 2020 8:16 am
by Jimmyb
Very nice, my assumption is the leaf springs are individual pieces of brass, how did you keep them together, glue, solder or a pin through the centre
Re: Charles - Penrhyn Mainline Hunslet
Posted: Tue May 05, 2020 12:33 am
by dewintondave
Thanks lads. The leaves are copper, I had a piece the correct thickness, and hacksawed and filed each piece. The central strap is now drilled through to attach to the axle box push rod. I'm working on the hanger brackets now
The leaves have been trimmed
- rsz_img_20200503_192524.jpg (33.21 KiB) Viewed 7131 times
Re: Charles - Penrhyn Mainline Hunslet
Posted: Tue May 05, 2020 7:06 am
by FWLR
Nice job Dave, are you going to just let them weather naturally.
Re: Charles - Penrhyn Mainline Hunslet
Posted: Wed May 06, 2020 12:50 am
by dewintondave
FWLR wrote: ↑Tue May 05, 2020 7:06 am
Nice job Dave, are you going to just let them weather naturally.
I think I'll paint them Rod
Here's the hangers so far
- rsz_img_20200505_184635.jpg (30.07 KiB) Viewed 7088 times
Re: Charles - Penrhyn Mainline Hunslet
Posted: Thu May 07, 2020 5:45 am
by dewintondave
Had a whoopsy yesterday with the hanger cross-hole position being too low. Plugged it with a piece of rod, silver soldered, and then cut out and filed down.
(hq pic for Tom)
- rsz_dsc00426 (1).jpg (61.74 KiB) Viewed 7055 times
- rsz_1dsc00428.jpg (25.36 KiB) Viewed 7055 times
Re: Charles - Penrhyn Mainline Hunslet
Posted: Thu May 07, 2020 8:37 am
by tom_tom_go
The first pic is much better quality, you should post them all like that!
Re: Charles - Penrhyn Mainline Hunslet
Posted: Thu May 07, 2020 8:49 am
by FWLR
Love the hangers Dave...
Re: Charles - Penrhyn Mainline Hunslet
Posted: Mon May 11, 2020 9:15 am
by dewintondave
I've made another hanger this time out of brass rod. Hmmm, I wonder which to go for? The leaf spring and hangers so far are just a trial
(Using the old digital camera for Tom)
- rsz_dsc00429.jpg (26.64 KiB) Viewed 7006 times
- rsz_dsc00431.jpg (28.98 KiB) Viewed 7006 times
Re: Charles - Penrhyn Mainline Hunslet
Posted: Mon May 11, 2020 9:21 am
by tom_tom_go
The pictures are better quality using your digital camera.
I like the brass rod bracket.
Re: Charles - Penrhyn Mainline Hunslet
Posted: Mon May 11, 2020 9:30 am
by LNR
I reckon the flat bar type is more prototypical.
Grant.