Page 1 of 1

New Accucraft Loco Dolgoch

Posted: Sun Dec 02, 2018 2:28 pm
by cncmodeller
Unsurprisingly on this sleepy behind the times forum this new announcement from Accucraft is not on here [ I wonder what the Primary Garden Railway Forum is?]
So here it is : https://www.accucraft.uk.com/2018/12/ac ... er-news-8/

This I think is major news as it is intimating that all the Tallyllyn locos will be released in due course so a Corris Hughes Loco would be an interesting conversion project.

John

Re: New Accucraft Loco Dolgoch

Posted: Sun Dec 02, 2018 2:49 pm
by tom_tom_go
Feel free to not use the forum it if you find it behind the times particularly if you are going to be rude.

Re: New Accucraft Loco Dolgoch

Posted: Sun Dec 02, 2018 5:00 pm
by Big Jim
They are not the only ones to announce a model of Dolgoch:

https://www.thetraindepartment.com/ttd- ... s/dolgoch/

Jay from The Train Dept in the US has announced his version as well. There appear to be a few issues regarding Accucraft's announcement and accusations of underhand dealings that are probably best not discussed here. The price of this one is expected to be a shade over £2k, a lot of money, perhaps but for a fully scale model supplied lined this does not seem OTT.

If people have any news of new releases please feel free to share it, we have no official links with any of the 16mm manufacturers and it appears that most of the new model announcements are done by social media these days.

Re: New Accucraft Loco Dolgoch

Posted: Sun Dec 02, 2018 5:10 pm
by cncmodeller
I've never been a big fan of the squared off cab entrance, It spoils it's looks in my opinion.
I think actually there is a big enough market for two suppliers as these have been wanted by a lot of people for a very long time, even Accucraft don't make a vast quantity of any particular loco as one might think.

John

Re: New Accucraft Loco Dolgoch

Posted: Sun Dec 02, 2018 5:34 pm
by Big Jim
I think you may be right about being a market for two suppliers. Accucraft have not been as successful as they might in delivering promised batches on time or on predicted price, this may be due to circumstances out of their control. Perhaps a smaller supplier may have more success?

I agree that the curved topped looks a bit more pleasing on the eye but if this came about after the rebuild that was finished in 1963 it has been like it for a third of its working life. There are always modifications made on an engine this old and where do you draw the line on what to depict or not?

Re: New Accucraft Loco Dolgoch

Posted: Sun Feb 24, 2019 6:11 am
by dewintondave
Big Jim wrote: Sun Dec 02, 2018 5:00 pm There appear to be a few issues regarding Accucraft's announcement and accusations of underhand dealings that are probably best not discussed here.
Yes, we had quite a debate on this on Facebook at the time, and the mods unfortunately came down on the side of Accucraft by censuring us. When a manufacturer went rogue the mods wouldn't allow criticism, therefore potential buyers don't get to hear of their ethical shortcomings.

Re: New Accucraft Loco Dolgoch

Posted: Sun Feb 24, 2019 7:28 am
by JMORG
dewintondave wrote: Sun Feb 24, 2019 6:11 am
Big Jim wrote: Sun Dec 02, 2018 5:00 pm There appear to be a few issues regarding Accucraft's announcement and accusations of underhand dealings that are probably best not discussed here.
Yes, we had quite a debate on this on Facebook at the time, and the mods unfortunately came down on the side of Accucraft by censuring us. When a manufacturer went rogue the mods wouldn't allow criticism, therefore potential buyers don't get to hear of their ethical shortcomings.

Facebook is always biased and will often flag you as "offensive" if it doesn't agree with their views. It happens in every industry, companies you underhanded tactics to ensure critics ect only say good things...

Looks great though, although too expensive for me. Beddgelert will probably be my newest engine for a while yet

Re: New Accucraft Loco Dolgoch

Posted: Sun Feb 24, 2019 7:15 pm
by TheChestnutLine
cncmodeller wrote: Sun Dec 02, 2018 2:28 pm Unsurprisingly on this sleepy behind the times forum this new announcement from Accucraft is not on here [ I wonder what the Primary Garden Railway Forum is?]
So here it is : https://www.accucraft.uk.com/2018/12/ac ... er-news-8/

This I think is major news as it is intimating that all the Tallyllyn locos will be released in due course so a Corris Hughes Loco would be an interesting conversion project.

John

I think you'll find the 6th post down in the 'New Models & Reviews' covered this in December...

Re: New Accucraft Loco Dolgoch

Posted: Sun Feb 24, 2019 7:22 pm
by cncmodeller
I think you will find that was two weeks later....
John

Re: New Accucraft Loco Dolgoch

Posted: Sun Feb 24, 2019 7:26 pm
by Busted Bricks
TheChestnutLine wrote: Sun Feb 24, 2019 7:15 pm

I think you'll find the 6th post down in the 'New Models & Reviews' covered this in December...
And let facts get in the way of a good moan? ;)
tom_tom_go wrote: Sun Dec 02, 2018 2:49 pm Feel free to not use the forum it if you find it behind the times particularly if you are going to be rude.
My thoughts exactly. It was a very strange way to start a discussion, particularly as the claim made was false. I wonder if an apology is forthcoming?

Re: New Accucraft Loco Dolgoch

Posted: Tue Jul 30, 2019 8:25 pm
by DonW
I have been advised that the Accucraft Dolgoch I ordered should be dispatched this week. I had asked Tony Sant about one but there was a queue of about 70 people wanting one I was not sure I would live long enough to receive one. Having driven Dolgoch up to Bryn Glas and back I felt it was a must for my line.
I cannot remember now whether I took this picture before or after my trip probably on return.
Dolgoch.jpg
Dolgoch.jpg (50.53 KiB) Viewed 11956 times
Don

Re: New Accucraft Loco Dolgoch

Posted: Thu Aug 01, 2019 11:57 pm
by DonW
Dolgoch arrived today
dolgoch1.JPG
dolgoch1.JPG (22.08 KiB) Viewed 11884 times
dolgoch2.JPG
dolgoch2.JPG (27.59 KiB) Viewed 11884 times
The paintjob and detailing are superb. The whistle is supplied but I haven't fitted it yet I presume it was separate to avoid damage. Thhe only thing missing from my photo would seem to be what I assume is a vaccuum pump on the rh side I dont know when that was fitted.

I have no track here as yet so I will either have to get the rolling road out or lay a couple of lemgths on a board to carry out a steam test.

Don

Re: New Accucraft Loco Dolgoch

Posted: Fri Aug 02, 2019 11:07 am
by MRail
Dolgoch has an air bake pump forward of cab, RHS.

Re: New Accucraft Loco Dolgoch

Posted: Fri Aug 02, 2019 6:02 pm
by cncmodeller
The air brake is a modern addition I'd leave it off.
John

Re: New Accucraft Loco Dolgoch

Posted: Sat Aug 03, 2019 8:31 am
by DonW
I checked with the packet of bits there is no Air Brake. I think I can live with the omission. I do remember the brake handle bing on the RHS of the cab and using it. We dont need to have working brakes on our models.

Don