Page 2 of 4
Re: Cats and Dogs Railway (austrian narrow gauge)
Posted: Fri May 04, 2018 9:43 pm
by markoteal
daan wrote: ↑Fri May 04, 2018 6:29 pm
Well, to my surprise the mrs didn't make a big point of me building the new extension. I had to promise a few new garden chairs and then it was fine..
But I had to promise that I won't convert the whole garden into a railway.. I promised I won't do that (yet) and crossed my fingers behind my back..
Sounds familiar!
Re: Cats and Dogs Railway (austrian narrow gauge)
Posted: Sat May 05, 2018 6:08 am
by daan
Yesterday evening I did make an upgrade to the turntable. It wasn't that stable on it's bearing as I hoped, so I drilled a hole through the middle of the bridge and the axle of the bearing and put a bolt through it. On the underside I placed 2 belleville washers which pull the bridge onto the bearing. Now it stays fixed. I should have done that in the first place, but I was too lazy
Re: Cats and Dogs Railway (austrian narrow gauge)
Posted: Sat May 05, 2018 9:15 am
by tom_tom_go
Any chance of a video of the turntable and locos in action?
Re: Cats and Dogs Railway (austrian narrow gauge)
Posted: Sat May 05, 2018 10:34 am
by FWLR
The more I see of your line Daan the more I love it.
Like others I like your Turntable, simple and does the job well….
Re: Cats and Dogs Railway (austrian narrow gauge)
Posted: Sat May 05, 2018 11:54 am
by ge_rik
Great looking extension - glad you got planning permission for it from the Household Authorities
Rik
Re: Cats and Dogs Railway (austrian narrow gauge)
Posted: Sun May 06, 2018 8:20 am
by daan
A video will come, but yesterday I took down the old stationboard and started rebuilding that area of the railway. Instead of wood, I made a brick wall with a wide top supporting the track and left the rest open for landscaping. The bridge will be altered a bit (grows longer) to hook up at the end of the retaining wall. the whole big curve will be on the bridge now.
Apart from that a lot of the line will be evened out, since the old stationboard was rotten, a lot of the track wasn't level anymore, so that will be sorted as well (as far as possible).
Soon the line will be operational again for a video.
Re: Cats and Dogs Railway (austrian narrow gauge)
Posted: Mon May 07, 2018 7:49 am
by FWLR
Hope so Daan, I love seeing your line.
Re: Cats and Dogs Railway (austrian narrow gauge)
Posted: Tue May 08, 2018 10:18 pm
by daan
Re: Cats and Dogs Railway (austrian narrow gauge)
Posted: Tue May 08, 2018 10:42 pm
by invicta280
Very effective use of rocks and plants Daan. Good planting makes the railway seem at home in its surroundings (and earns you points with 'the boss'). I really like your viaduct on its stone piers too.
Re: Cats and Dogs Railway (austrian narrow gauge)
Posted: Wed May 09, 2018 6:54 am
by FWLR
Re: Cats and Dogs Railway (austrian narrow gauge)
Posted: Wed May 09, 2018 11:40 am
by IanC
Very good use of what looks like a restricted space. The planting and scenic features enhance the line.
The improvements carried will bo doubt provide better running and enjoyment.
Ian
Re: Cats and Dogs Railway (austrian narrow gauge)
Posted: Wed May 09, 2018 12:44 pm
by ge_rik
Looking good Daan. Can I just ask what make is the double slip? It seems to be less sharply curved than the LGB version.
Rik
Re: Cats and Dogs Railway (austrian narrow gauge)
Posted: Wed May 09, 2018 9:43 pm
by daan
Thanks for the compliments! @Rik, it is a normal LGB double slip. They are 22,5 degrees (R1 is 30) and the length is 1,5 straight, so 45 cm. It is about R3 I guess.
In my railtool for the computer I don't have any double slips in R1 from LGB, they are all this size. Mine however misses the boxes to throw the switches, making it look substantial less wide.. It was an old, very cheap item which needed repairs..
Re: Cats and Dogs Railway (austrian narrow gauge)
Posted: Thu May 10, 2018 7:51 am
by ge_rik
daan wrote: ↑Wed May 09, 2018 9:43 pm
Thanks for the compliments! @Rik, it is a normal LGB double slip. They are 22,5 degrees (R1 is 30) and the length is 1,5 straight, so 45 cm. It is about R3 I guess.
In my railtool for the computer I don't have any double slips in R1 from LGB, they are all this size. Mine however misses the boxes to throw the switches, making it look substantial less wide.. It was an old, very cheap item which needed repairs..
Thanks. I always thought they were R1 and so never bothered with planning for them. A single slip would have been useful at my main station and so a double slip would give an added bonus. Must keep an eye open for a secondhand one.
Rik
Re: Cats and Dogs Railway (austrian narrow gauge)
Posted: Thu May 10, 2018 6:43 pm
by tom_tom_go
This is a great example of what can be done in a small space, great work Daan.
Re: Cats and Dogs Railway (austrian narrow gauge)
Posted: Thu May 10, 2018 7:41 pm
by daan
ge_rik wrote: ↑Thu May 10, 2018 7:51 am
Thanks. I always thought they were R1 and so never bothered with planning for them. A single slip would have been useful at my main station and so a double slip would give an added bonus. Must keep an eye open for a secondhand one.
Rik
I've tried the configuration in Anyrail (that's the progamme I use for designing) and it's definitely R3. The 16000 track fits nicely across the radius of the double slip turnout. You could try
grootspoor for one..
Re: Cats and Dogs Railway (austrian narrow gauge)
Posted: Sun May 13, 2018 9:06 am
by daan
The past two days I've been working on a new bridge section in the Alpstein bridge. It lacked a section because I relocated 2 smaller sections and removed a stone pier to another spot. This left a gap of 55cm in the bridge.
My choice was to build this section a bit different than the other 4 sections. It's a longer and is in full sight all around, so I wanted this section to look attractive.
It's built of aluminium, 55cm long which makes the bridge total a 175cm in length. The bridge is 57cm at it's highest point.
On the bridge I made guardrails from old trackpieces, to keep loco's on the bridge if they would derail, but merely it's an extra visual spot of interest.
The washers on the piers have to be cast in concrete yet, but these washers allow me to get the hight of the track just right. I've painted the bridge the same colour as the rest of the bridge pieces by now.
If the pictures don't work, please refresh your screen. It helps most of the time.
Re: Cats and Dogs Railway (austrian narrow gauge)
Posted: Sun May 13, 2018 9:20 am
by FWLR
It’s full of visual interest now Dann, but even more is so now.
Re: Cats and Dogs Railway (austrian narrow gauge)
Posted: Sun May 13, 2018 10:28 am
by tom_tom_go
I have only just noticed the long catch rails you use, good idea.
Re: Cats and Dogs Railway (austrian narrow gauge)
Posted: Sun May 13, 2018 1:48 pm
by bazzer42
Love the bridge says a bridge builder. Was the curved base pre-curved or have you bent it yourself ?
I have to say I do like open bridges.