Do you have a problem? Here is the place to appeal for help
-
pauly
- Driver
- Posts: 1970
- Joined: Tue Aug 12, 2008 9:18 pm
Post
by pauly » Sat Feb 21, 2009 9:39 pm
If you fit a cab to a manual millie will you have to replace the regulator arm or will it fit in the cab???
this is a question urgently need answering!!!!!!!!!
A steam propelled life-style.
-
MDLR
- Driver
- Posts: 4027
- Joined: Thu Jan 15, 2009 10:38 pm
- Location: Near Ripley, Derbyshire, UK
-
Contact:
Post
by MDLR » Sat Feb 21, 2009 9:55 pm
It'll fit - you just stick your finger in the right hand side of the cab to use it. You might have to adjust it if putting the roof on gets in the way of the regulator opening as far as it's needed..........
-
pauly
- Driver
- Posts: 1970
- Joined: Tue Aug 12, 2008 9:18 pm
Post
by pauly » Sat Feb 21, 2009 10:08 pm
thanks I'm taking the RC out of my Millie and refitting it with manual
because RC in a Millie just doesn't work unless you use a trailing carriage to hold all the anti-glitch equipment
I could try and make it work but I had so much more fun when it was manual so there
A steam propelled life-style.
-
MDLR
- Driver
- Posts: 4027
- Joined: Thu Jan 15, 2009 10:38 pm
- Location: Near Ripley, Derbyshire, UK
-
Contact:
Post
by MDLR » Sat Feb 21, 2009 11:32 pm
Now you've said that........... You'll need to replace the regulator AND the handle - the radio control regulator has a much coarser taper on the needle.
I'm sure a phone call to Doncaster on Monday will sort it out.
-
pauly
- Driver
- Posts: 1970
- Joined: Tue Aug 12, 2008 9:18 pm
Post
by pauly » Sat Feb 21, 2009 11:50 pm
no Iv still got the original pieces here (reg and handle)
A steam propelled life-style.
-
MDLR
- Driver
- Posts: 4027
- Joined: Thu Jan 15, 2009 10:38 pm
- Location: Near Ripley, Derbyshire, UK
-
Contact:
Post
by MDLR » Sun Feb 22, 2009 10:30 am
pauly wrote:No I've still got the original pieces here (reg and handle)
In that case, you're sorted!
Who is online
Users browsing this forum: No registered users and 0 guests