Mamod / MSS / IP Jane / Janet Body Overlay Kits 2016
Posted: Fri May 06, 2016 5:58 pm
Hi folks,
I am considering doing another run of body overlay kits for little locos.
I have two styles sofar - a Tender Loco Bodykit, and a Sidetanks-only kit.
SIDETANKS KIT
The first is the sidetanks only kit, with the option of rivet detail - the kit comes with the interiors punched to guide where to punch out rivets should you want.
As delivered - flatpack. There are seven kits here.
Folded out, unpainted, unpunched:
Folded out, rivetpunched, unpainted:
Fitted and painted - a couple of happy customers.
PRICE -£25 + £2 P&P UK
================
TENDER LOCO BODYKIT
This is a slightly more hefty kit, coming with deeper tanks and an enlargement of the cabsides, for the more civilised railway company which cares about its employees :lol:
As delivered...
As set, folded and setup, unriveted and unpainted
Rivetpunch guides in the interior:
Finished and attached:-
£33 + £2 p&p UK
Improvements:
The Tender Loco Bodykit sold out on its initial run which was impressive and if there are three orders for a mk1, I will order some more. However I have also sought some improvements on it.
First would be the top horizontal of the cab entrance, make this thicker and less flimsy. The front panel would be shortened in height; from the top of the piece down to the smokebox footplate it would be reduced to the same height as the front panel on my "Simple" kit to make for easier fitting.
Illustrated below.
Target is 4 orders for this to go ahead, at £33 per kit and £2 P+p UK.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
BARGAIN BASEMENT
I have 1 mk1 Tender Loco Body kit, etch primed and rivet punched but without the frontside folds. This was a prototype while designing the kits. It is otherise in perfect nick and easily attached to your loco. For this, I would want £25 + £2 p&P UK.
Thank you for your time
I am considering doing another run of body overlay kits for little locos.
I have two styles sofar - a Tender Loco Bodykit, and a Sidetanks-only kit.
SIDETANKS KIT
The first is the sidetanks only kit, with the option of rivet detail - the kit comes with the interiors punched to guide where to punch out rivets should you want.
As delivered - flatpack. There are seven kits here.
Folded out, unpainted, unpunched:
Folded out, rivetpunched, unpainted:
Fitted and painted - a couple of happy customers.
PRICE -£25 + £2 P&P UK
================
TENDER LOCO BODYKIT
This is a slightly more hefty kit, coming with deeper tanks and an enlargement of the cabsides, for the more civilised railway company which cares about its employees :lol:
As delivered...
As set, folded and setup, unriveted and unpainted
Rivetpunch guides in the interior:
Finished and attached:-
£33 + £2 p&p UK
Improvements:
The Tender Loco Bodykit sold out on its initial run which was impressive and if there are three orders for a mk1, I will order some more. However I have also sought some improvements on it.
First would be the top horizontal of the cab entrance, make this thicker and less flimsy. The front panel would be shortened in height; from the top of the piece down to the smokebox footplate it would be reduced to the same height as the front panel on my "Simple" kit to make for easier fitting.
Illustrated below.
Target is 4 orders for this to go ahead, at £33 per kit and £2 P+p UK.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
BARGAIN BASEMENT
I have 1 mk1 Tender Loco Body kit, etch primed and rivet punched but without the frontside folds. This was a prototype while designing the kits. It is otherise in perfect nick and easily attached to your loco. For this, I would want £25 + £2 p&P UK.
Thank you for your time