Home made flat bed wagon
- andysleigh
- Driver
- Posts: 1362
- Joined: Thu Oct 18, 2007 6:21 pm
- Location: Guildford
- Contact:
Home made flat bed wagon
this is a flat bed wagon i made, i bought the bogies from Binnie engineering. the bed was originally going to be the canopy roof for my wilesco showmans, but as it was to thick, i used it on this insted.
for the side girders, i was originally going to use Plastruct H Bean sections, but as i found some old u shaped metal bits in the shed, i thought i might as well use them, as they didnt cost and they are metal, so if would give it some weight. without them it was very very light, i am supprised it stayed on behind edrig.
for the side girders, i was originally going to use Plastruct H Bean sections, but as i found some old u shaped metal bits in the shed, i thought i might as well use them, as they didnt cost and they are metal, so if would give it some weight. without them it was very very light, i am supprised it stayed on behind edrig.
- andysleigh
- Driver
- Posts: 1362
- Joined: Thu Oct 18, 2007 6:21 pm
- Location: Guildford
- Contact:
thanks matt.
next i plan to build somthing similar to this
http://www.rhhfranks.co.uk/sm32%20website/WDS-33.jpg
useing the same style of bogies and girders.
then after that !
an open top wagon similar to
http://www.rhhfranks.co.uk/sm32%20website/wdc.jpg
as they are so simple and fast (2-3 hours max for each) to make, i shall make a few.
all specially made for edrig
next i plan to build somthing similar to this
http://www.rhhfranks.co.uk/sm32%20website/WDS-33.jpg
useing the same style of bogies and girders.
then after that !
an open top wagon similar to
http://www.rhhfranks.co.uk/sm32%20website/wdc.jpg
as they are so simple and fast (2-3 hours max for each) to make, i shall make a few.
all specially made for edrig
-
- Retired Director
- Posts: 3536
- Joined: Sat Aug 18, 2007 11:00 pm
- andysleigh
- Driver
- Posts: 1362
- Joined: Thu Oct 18, 2007 6:21 pm
- Location: Guildford
- Contact:
-
- Retired Director
- Posts: 3536
- Joined: Sat Aug 18, 2007 11:00 pm
-
- Retired Director
- Posts: 3536
- Joined: Sat Aug 18, 2007 11:00 pm
Who is online
Users browsing this forum: No registered users and 2 guests