Pilgrim Locomotive Wroks

A place for discussing diverse methods of powering locomotives, such as Internal Combustion, Wind, etc...
SillyBilly
Retired Director
Retired Director
Posts: 3536
Joined: Sat Aug 18, 2007 11:00 pm

Pilgrim Locomotive Wroks

Post by SillyBilly » Tue Oct 23, 2007 11:15 pm

Hello,
For those of you who have never heared of Pilgrim Locomotive Works, they manufacture true I/C locos for 32mm gauge, it's a R/C car petrol engine that drives a dynamo to power the motors, truly fasinating. I'd recommend a visit to their website : www.pilgrimlocomotiveworks.co.uk

User avatar
ACLR
Retired Director
Retired Director
Posts: 1592
Joined: Wed Oct 17, 2007 6:22 am
Location: Brisbane
Contact:

Post by ACLR » Wed Oct 24, 2007 4:05 am

wow whay an exciting design idea
looks great thanks for that sb

steamyjim
Retired Director
Retired Director
Posts: 1210
Joined: Tue Oct 16, 2007 9:19 pm

Post by steamyjim » Wed Oct 24, 2007 9:31 am

VERY NICE!

I wonder how hard they are to build :? To expensive for me :cry:

SillyBilly
Retired Director
Retired Director
Posts: 3536
Joined: Sat Aug 18, 2007 11:00 pm

Post by SillyBilly » Wed Oct 24, 2007 4:51 pm

I was quite suprised that their cheapest (complete with R/C) is only just under £1000!

garratt100
Trainee Fireman
Trainee Fireman
Posts: 142
Joined: Fri Oct 19, 2007 6:08 pm
Contact:

Post by garratt100 » Thu Oct 25, 2007 7:34 pm

I saw one of the non bogie diesels running once, it was a fraction noisy, but very smooth & a great puller! (sounds like me when i started out with the ladies...!)

Chris.

ptlrcecil
Driver
Driver
Posts: 1091
Joined: Fri Oct 19, 2007 4:14 pm
Location: Cumbriasestishire
Contact:

Post by ptlrcecil » Fri Oct 26, 2007 7:14 pm

Ive seen one and the driver had no end of problems with it. I think it was a tradesman the 0-4-0 one. Also no offence to the maker but the body shell looked like it has been shaped with a lump hammer.
http://www.freewebs.com/pinetreelightrailway/index.

Cecil your engines on Fire!

Its a Mamod it does that.

SillyBilly
Retired Director
Retired Director
Posts: 3536
Joined: Sat Aug 18, 2007 11:00 pm

Post by SillyBilly » Sat Oct 27, 2007 8:51 pm

Yes, your right, the bodywork isn't the most attractive really is it.

User avatar
tuppenced
Trainee Fireman
Trainee Fireman
Posts: 161
Joined: Wed May 27, 2009 1:50 am

Pilgrim

Post by tuppenced » Wed May 27, 2009 9:59 am

David Clark bought the business, but I suspect he's going to publish what he knows rather than make locomotives.

David

User avatar
TonyW
Driver
Driver
Posts: 1357
Joined: Fri May 16, 2008 9:25 am
Location: North Wales
Contact:

Post by TonyW » Wed May 27, 2009 10:31 am

Tony Willmore
Rhos Helyg Locomotive Works: http://www.rhoshelyg.me.uk
Facebook: https://www.facebook.com/RhosHelygLocoWorks

mhlr
Retired Director
Retired Director
Posts: 4336
Joined: Sun Oct 21, 2007 8:16 pm
Location: Shropshire, England

Post by mhlr » Wed May 27, 2009 10:55 am

So do I!
Image

User avatar
tuppenced
Trainee Fireman
Trainee Fireman
Posts: 161
Joined: Wed May 27, 2009 1:50 am

Re: Live diesel

Post by tuppenced » Wed May 27, 2009 1:59 pm

I'll see if I can link to a picture of Jerry Hyde's live diesels.

David


Image

Anton Richards
Cleaner
Cleaner
Posts: 37
Joined: Wed Aug 31, 2011 8:24 pm
Location: Hertfordshire

Post by Anton Richards » Sat Oct 01, 2011 8:54 am

Just thought ide add these photos and video :)

http://www.youtube.com/watch?v=kqoD1ajht18

Image

Image

Image
Live Diesel Locomotives by Anton Richards

User avatar
tuppenced
Trainee Fireman
Trainee Fireman
Posts: 161
Joined: Wed May 27, 2009 1:50 am

Re: Pilgrim

Post by tuppenced » Sat Oct 01, 2011 10:54 am

tuppenced:16436 wrote:David Clark bought the business, but I suspect he's going to publish what he knows rather than make locomotives.David
Book Review:

The secrets of the Pilgrim Locomotive works were revealed in the following publication:

Model Engineer / Model Engineers' Workshop Special Edition
"16mm Narrow gauge in your garden"

MyHobbyStore Group 2009
£4.99

The magazine was available exclusively from WH Smith who may have copies, and not long ago the Editor told me that his company has a few copies left.
www.myhobbystoregroup.com
0844 412 2262

Pilgrim Locomotive Works was an enterprise by gospel guitarist Barry Reeves. Barry developed crippling arthritis, and sold the business to David Clark, who is now so busy with the magazines that he decided the best way to monetrarise the asset was to publish the Intellectual Property rather than try to crank out heavy model locomotives in his Highland fastness. Much appreciated.

He boiled the material down to just two pages including seven photos and a circuit diagram. There's no theory or System approach, just nitty-gritty practical details of David's own 0-4-0 prototype.

In a nutshell, the Pilgrim design has evolved to:

Prime Mover:
OS FX26FS glow motor which is a car type with recoil starter

Mechanical Transmission:
Radiospares or ARC Euro Trade Oldham Coupling

Generator:
Como/MFA motor 719-RE540/1

Electrical Transmission:
Brian Jones Mac-Five
Regulator, capacitor, fuses etc

Traction:
'Pilgrim Special' Maxon motor and gearbox from ABC Gears
Second axle driven by coupling rods

Fuel tank:
aircraft type with fuel priming button

Cooling:
Computer type 6V fan
Rechargeable battery (looks like four cells) which drives the radio and also the fan while the engine isn't running (but not, as some have assumed, the traction motor(s)).

Other Live Diesel builders have questioned the need for an Electronic Speed Controller. However they all have some arrangement that stops the locomotive without stopping the engine, and most have some alternative 'gearing' such as series/parallel connection of traction motors. I think an ESC represents the sound and function of a diesel-electric well.

Everyone emphasises the need for a good match between the generator and the traction motor(s).

David 1/2d

Anton Richards
Cleaner
Cleaner
Posts: 37
Joined: Wed Aug 31, 2011 8:24 pm
Location: Hertfordshire

Post by Anton Richards » Sat Oct 01, 2011 11:36 am

Hi David

Thanks for posting that info.

Not to sure if youve looked at my thread on this forum, under 'Antons Live Diesel': http://gardenrails.myfreeforum.org/Anto ... t4608.html

As i use a similar (although much simply) design.

Image.

Image

VIDEO: http://www.youtube.com/watch?v=C6RCl-qapJM

Many people have questioned Barry's choice for engine and body, as they complain about the noise and the looks, but i think it was a pure work of genius and i loved his batch of locos.

I  Believe I have spoken to David Clark and or a guy who had bought the name 'Pilgrim locomotive works' and he  had a one off prototype tradesman 0-4-0 loco, which i was very interested in.

I say to anyone interested in 'Live Diesel', internal combustion powered locomotives, watch out for a few good videos of 3 or more diesels all running together as myself and a group of guys from the 'Continental garden trains' forum-

http://continental-garden-t.motionforum ... lexpo-2011

are taking a trip to the RailExpo 2011 Villebon sur Yvette near Paris on the 25/26/27 November

http://railexpo.fr/?lang=en

And all bringing our diesel locos which should be a world first, seeing many in one place all at the same time, running together.

Carl Hibbs, is the guy organising the whole thing and im sure anyone interested in live diesel will know of his name.
Live Diesel Locomotives by Anton Richards

User avatar
tuppenced
Trainee Fireman
Trainee Fireman
Posts: 161
Joined: Wed May 27, 2009 1:50 am

Post by tuppenced » Sat Oct 01, 2011 11:51 am

Anton Richards:59471 wrote:Not to sure if youve looked at my thread on this forum, under 'Antons Live Diesel': http://gardenrails.myfreeforum.org/Anto ... t4608.html
Thanks Anton, I hadn't seen your thread.

You mention noise. Barry put a lot of effort into developing effective silencers, and was very proud of the quietness of his final design.

David 1/2d

R31 Mark
Cleaner
Cleaner
Posts: 40
Joined: Sun Aug 21, 2011 11:01 pm

Post by R31 Mark » Sat Oct 01, 2011 11:52 am

Top work and info in here, I have thought of using a cox 049 to power a live "diesel".
Image

User avatar
Hancockshire
Driver
Driver
Posts: 1204
Joined: Tue Apr 14, 2009 11:06 am
Location: Stranraer
Contact:

Post by Hancockshire » Wed Oct 05, 2011 6:28 pm

Hey Anton, I've seen your stuff on your Youtube account & I like a lot. I would like to make a live diesel but the only loco I scratch built was Pete (& everyone knows of his little problem). Maybe someday when I get cleverer
Image

Anton Richards
Cleaner
Cleaner
Posts: 37
Joined: Wed Aug 31, 2011 8:24 pm
Location: Hertfordshire

Post by Anton Richards » Mon Dec 12, 2011 5:06 pm

This is the latest vidoe of 3 live diesel locomotives all running on the same line. Its a world first i believe

http://www.youtube.com/watch?v=AC2o335F ... ideo_title

Please like the video and comment :)
Live Diesel Locomotives by Anton Richards

Anton Richards
Cleaner
Cleaner
Posts: 37
Joined: Wed Aug 31, 2011 8:24 pm
Location: Hertfordshire

Post by Anton Richards » Fri May 18, 2012 4:09 pm

Please look at the two new videos of shunt hauling his first train...

http://www.youtube.com/watch?v=0RbiuP1vVsw

http://www.youtube.com/watch?v=xxbXX-u5W04

Please like and comment :D
Live Diesel Locomotives by Anton Richards

Anton Richards
Cleaner
Cleaner
Posts: 37
Joined: Wed Aug 31, 2011 8:24 pm
Location: Hertfordshire

Post by Anton Richards » Wed Oct 17, 2012 10:45 am

Hancockshire: Its really not as hard as it sounds. It just all about how much your willing to experiment, and learn from mistakes. I have the problem that i am very impatient and just want to get things done as quickly as possible.

Let me know if you need any pointers

Anton
Live Diesel Locomotives by Anton Richards

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest