RE-Building my Lady Anne

ACLR · Post by **ACLR** » Thu Apr 24, 2008 4:16 am

looking forward to the pics of the un-named railway

bungle80a · Post by **bungle80a** » Thu Apr 24, 2008 11:33 pm

Nowt done today on Lady, been too busy decoratin and starting to build the garden railway previously mentioned. Construction of that railway in now in its own thread in the Railways and Layouts (?) section.

steamyjim · Post by **steamyjim** » Fri Apr 25, 2008 5:52 pm

I love it!!!!!!

I realy want one of those older Lady Annes

bungle80a · Post by **bungle80a** » Fri Apr 25, 2008 7:58 pm

She's got a 4 wick burner! Thats gonna pump out some heat to the boiler! Going to do some cosmetic bit on her tonight! Will post pics later if there is any significant differences!

ACLR · Post by **ACLR** » Fri Apr 25, 2008 11:40 pm

keep up the great work mate

ptlrcecil · Post by **ptlrcecil** » Sat Apr 26, 2008 5:00 pm

bungle80a wrote:She's got a 4 wick burner! Thats gonna pump out some heat to the boiler! Going to do some cosmetic bit on her tonight! Will post pics later if there is any significant differences!

Yeah its just a case of getting the right material for the wicks.

bungle80a · Post by **bungle80a** » Sun Apr 27, 2008 11:27 am

There willl be some experimenting with different materials for the wicks!

Well, yesterday same quite a lot of progress thanks to PTLRsam! All engineering work is being carried out by him while I do cosmetic jobs and act as photographer!

The work startd by cleaning up and siver soldering the meths burner as it was previously soft soldered and the pipe with the wicks was disconnected. The original filler pipe was removed and a bush put in for a new one!

The next job was to put a bush in the boiler to accept a water filler valve, In piccies below show the moment of truth with the boiler being drilled (arrrghhhh! He's putting a Fur Cough big hole in my boiler!) and the boiler once drilled!

It was also decided by Mr Engineer to alter the pipe for the pressure gauge as the gauge screwed into a fixed nut and should I come to change the gauge at some point, it could end up pointing in any direction. So the end was cut off, a nipple produced and silver soldered in and a union nut fitted to the pipe. Production of the union nut is shown here...

The bush was produced for the feed valve and silver soldered in. Below also shows it once done. (The actual feed valve is being produced at the PTLR workshop as I write this)

MY cosmetic works for the day are shown in the picccies below. I've painted footplate and cab inside, along with tank tops and sanding pot lids.

Then rather late at night, I painted the boiler and meths burner, ready for reassembly some point today. While I was doing that, PTLRsam started working on re-assembling the cylinders and eccentrics.

Also late at night, we realised we are missing a couple of rather important pieces which could delay the project! The safety valve is missing, as is the flame guard!

We will see what happens. Well, thats it for yesterdays progress. Time to get up to the PTLR and check on todays progress!

If you want to to see even more photos then goto my photobucket...
http://s294.photobucket.com/albums/mm92/bungle80a/

ptlrcecil · Post by **ptlrcecil** » Sun Apr 27, 2008 12:19 pm

Aye and who bought the engine with the safety valve and the cow catcher

.

SillyBilly · Post by **SillyBilly** » Sun Apr 27, 2008 2:00 pm

Nice work, you got a total bargain there.

steamyjim · Post by **steamyjim** » Sun Apr 27, 2008 5:12 pm

Well done

Tis a brilliant loco

bungle80a · Post by **bungle80a** » Mon Apr 28, 2008 12:00 am

Today's progress!

I got up to the PTLR workshops around noon and when I got there I was greeted by this...

Half hour later and the safety valve was complete. It is very similar to a Roundhouse safety valve, though it is slightly taller. Turns out Cecil's loco almost certainly got my safety valve as well as the cow catcher!!! The filler valve had also been produced, and it is nice to see some shiny metal on the top of the matt black boiler.

The wicks have been fitted to the burner, and it is temporarily back in place to assist with the next job.

The rest of the days work was replacing the missing flame guard, which was easier said than done. It had to be designed, produced and fettled! Fortunately, another meths fired Lady Anne was on hand to assist in the design process, although it is a later one and has a slightly different design.

By 11pm tonight the guard was complete (although it needs a coat of matt black paint) and fits.

The front end of the guard needed some adapting so that it didn't interfere with the eccentrics and front wheels. Shown here with the extra work done.

So by the end of the day, this is how she looks. The smoke box is just put in place for effect!

She is really beginning to come back together! As always, there are more pics in my photobucket. The link is in an earlier post.

steamyjim · Post by **steamyjim** » Mon Apr 28, 2008 7:37 pm

Thats looking brilliant!

laalratty · Post by **laalratty** » Mon Apr 28, 2008 7:54 pm

That engine is going to be a great advert for the workshops of the PTLR when its ready

Fantastic progress its looking reet good

ACLR · Post by **ACLR** » Mon Apr 28, 2008 8:15 pm

that is coming along nicely well done guys

bungle80a · Post by **bungle80a** » Tue Apr 29, 2008 12:31 am

There has been some progress again today on the 'Lady Anne' class Loco (more on that later). Her smoke box assembly, including the wee toolbox has been given a coat of matt black, as has the flame guard.

The first engineeringy job done this evening was refitting of the exhaust pipes into the cylinders.

Once that was complete, various other bits of pipework started to be attatched. The super heater pipe needed slots cutting into the flame guard, and the pipework to connect the lubricator needed a little reshaping. A few other bits were temporarily attatched for a photo opportunity...

Finally, while all this engineering work was going on in the workshop, I was busy preparing nameplates and numbers for her!

So from here on in, this loco will now be referred to as 'Westmorland'. I'll explain the significance another day as its half past midnight and I have to be up early for railway building.

ACLR · Post by **ACLR** » Tue Apr 29, 2008 2:55 am

cant wait to see it finished

its so close now

Chris Cairns · Post by **Chris Cairns** » Tue Apr 29, 2008 10:16 am

It is great to return from an overseas steam tour to read this expanded and very informative posting.

The photos on the work being undertaken are very good, and it was great to see silver soldering in action - a skill I've yet to master.

Looking forward to more postings and its first steaming after rebuild.

steamyjim · Post by **steamyjim** » Tue Apr 29, 2008 5:58 pm

She's looking great!

bungle80a · Post by **bungle80a** » Wed Apr 30, 2008 12:44 am

Been a funny ol' night! There were a few set backs this evening, with things going wrong. The newly fitted nipple on the pressure gauge pipe broke off while another job was being done and the meths overflow pipe snapped while trying to bend it down! The nipple was reattatched and the meths overflow pipe was plugged and a new one fitted in the side of the tank, so the pipe doesnt have to run through the rear buffer beam, which if ignited, melts the white metal cow catcher (as it appears to have in the past!)

So neither of those jobs were planned for tonight, but had to be done! The work that was scheduled for tonight, was refitting of the motion and valves.

It took a lot of fettling, as it kept locking, but by about 11:45 it was done. In the state she was now in, there was only 1 thing left to do! STEAM TEST!

The piccy below was taken on her maiden voyage since rebuilding, and apart from needing somthing doing with the wicks (currently, she appears as a ball of fire travelling round the garden in the dark!), she runs very well.

I'll post a vid 2moro, but its late and again, i've got to be up early to go build a railway!

ACLR · Post by **ACLR** » Wed Apr 30, 2008 1:18 am

wow looks great looking forward to that video

Garden Railway Forum

RE-Building my Lady Anne

Who is online