MonoPrice Delta and no PC or Laptop.
- BorisSpencer
- Fireman
- Posts: 251
- Joined: Thu Apr 05, 2018 2:36 pm
- Location: East Northants
MonoPrice Delta and no PC or Laptop.
Well I've finally joined the club!
My son and daughter bought me a MonoPrice Delta for Christmas. Although this is quite an unusual machine with a couple of limitations it seems to me to be an interesting introduction to this burgeoning extension to our hobby.
Positives:
Comes fully assembled and ready to go.
Very small footprint (10" x 13" x 17" high) including the filament spool hanging on the back.
Appears robust and stable with its all metal construction.
Has a carry handle on the top so along with its size it makes it very portable.
Negatives:
Small build area (4" cylinder).
Quite noisy.
Apparently its bed won't get hot enough to print ABS, but is good for PLA and TPU. Currently I have only used PLA.
As per the title I only use a Chromebook for personal work, and have been using Tinkercad online to design a few pieces (Riks blog has a perfect introduction to this impressively simple and intuitive software).
I have also found the AstroPrint website, which includes a free online slicer which has worked perfectly so far.
My first print was Steve's milk churn which came out with a bit of stringing on the handles, but this cleaned up very easily.
All in all I'm very pleased, and must thank all the contributors to the 3D printing threads for your inspiration.
My son and daughter bought me a MonoPrice Delta for Christmas. Although this is quite an unusual machine with a couple of limitations it seems to me to be an interesting introduction to this burgeoning extension to our hobby.
Positives:
Comes fully assembled and ready to go.
Very small footprint (10" x 13" x 17" high) including the filament spool hanging on the back.
Appears robust and stable with its all metal construction.
Has a carry handle on the top so along with its size it makes it very portable.
Negatives:
Small build area (4" cylinder).
Quite noisy.
Apparently its bed won't get hot enough to print ABS, but is good for PLA and TPU. Currently I have only used PLA.
As per the title I only use a Chromebook for personal work, and have been using Tinkercad online to design a few pieces (Riks blog has a perfect introduction to this impressively simple and intuitive software).
I have also found the AstroPrint website, which includes a free online slicer which has worked perfectly so far.
My first print was Steve's milk churn which came out with a bit of stringing on the handles, but this cleaned up very easily.
All in all I'm very pleased, and must thank all the contributors to the 3D printing threads for your inspiration.
Re: MonoPrice Delta and no PC or Laptop.
Welcome to the club!
A bit of stringing is fairly universal so don't worry about that.
I'm now going to open a book on how long it takes before you find a 4" cylinder so limiting and frustrating that you are on the lookout for a 2nd machine!
A bit of stringing is fairly universal so don't worry about that.
I'm now going to open a book on how long it takes before you find a 4" cylinder so limiting and frustrating that you are on the lookout for a 2nd machine!
Philip
- -steves-
- Administrator
- Posts: 2445
- Joined: Thu Jul 28, 2011 1:50 pm
- Location: Cambridge & Peterborough
Re: MonoPrice Delta and no PC or Laptop.
Nothing wrong with a 4" area to print I have a Monoprint which prints 12cm x 12cm square and it does all the smaller stuff that just tie up the bigger printer, so grills, lights, doors, wheels, panels for smaller loco's, small track, smaller wagon parts, line side items etc etc. Then get the ender 5 out when I need a chassis for a larger wagon or loco. To be fair, my little Monoprint does cracking job with way less stringing than my Ender 5 Pro.
Glad you managed to find a suitable online slicer, that's great
P.S. the handles on the milk churn often get stringy, so don't worry about that
Glad you managed to find a suitable online slicer, that's great
P.S. the handles on the milk churn often get stringy, so don't worry about that
The buck stops here .......
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Re: MonoPrice Delta and no PC or Laptop.
Oh I wasn't suggesting there is anything wrong with a 4" bed, rather the opposite, that it will get him hooked and then he'll want a bigger one!
Philip
- -steves-
- Administrator
- Posts: 2445
- Joined: Thu Jul 28, 2011 1:50 pm
- Location: Cambridge & Peterborough
Re: MonoPrice Delta and no PC or Laptop.
I was just being cheeky, lol. But you are of course right, he will want a bigger one soon enough
The buck stops here .......
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
- BorisSpencer
- Fireman
- Posts: 251
- Joined: Thu Apr 05, 2018 2:36 pm
- Location: East Northants
Re: MonoPrice Delta and no PC or Laptop.
I should add that at the same time they bought my Delta, my son also bought a second hand Ender 4, which he's still trying to get to grips with.
Once he's perfected its use, it means I will have access to a larger printer only half an hour away (I've already put in an order for some LocoRemote track ).
The beauty of the Delta is that I was printing within 20 minutes of opening the box.
Once he's perfected its use, it means I will have access to a larger printer only half an hour away (I've already put in an order for some LocoRemote track ).
The beauty of the Delta is that I was printing within 20 minutes of opening the box.
Re: MonoPrice Delta and no PC or Laptop.
Has a newbie myself Boris, it's going to take over belief me. Welcome and enjoy what is another fascinating part to add to our hobby.
The worlds your oyster has they say....
The worlds your oyster has they say....
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Who is online
Users browsing this forum: No registered users and 0 guests