(WH)WHR Rolling Stock
Re: (WH)WHR Rolling Stock
Looking good Andrew!
How did you cut the ends without fluffing up the MDF?
How did you cut the ends without fluffing up the MDF?
Re: (WH)WHR Rolling Stock
Thanks! I probably did fluff the MDF, but I stuck a thin veneer of ply over the top - if you look closely you'll see the ends are slightly thicker than the sides... I think I'll get Phil's model of an early FR coal wagon too...
Re: (WH)WHR Rolling Stock
A lovely model. Beautifully designed too as you say.
Check out my steam and engineering youtube channel at...
https://www.youtube.com/channel/UC8vX4P ... _PnvhldjjA
https://www.youtube.com/channel/UC8vX4P ... _PnvhldjjA
Re: (WH)WHR Rolling Stock
Hi all,
Before I was distracted by wagon-building, I'd observed that a somewhat clandestine operation was taking place in the railway's carriage and wagon works...
Strolling past the works today I discovered that a little more construction has taken place - after some weeks, finally the end is in sight. Not a lot else, just the end, plus a few rather spindly-looking uprights with some spacers between them, but it's progress, I suppose...
Unusually, work on this "mystery carriage" is taking place from the inside out, with the internal walls being added first.
I'll keep you posted...
Andrew.
Before I was distracted by wagon-building, I'd observed that a somewhat clandestine operation was taking place in the railway's carriage and wagon works...
Strolling past the works today I discovered that a little more construction has taken place - after some weeks, finally the end is in sight. Not a lot else, just the end, plus a few rather spindly-looking uprights with some spacers between them, but it's progress, I suppose...
Unusually, work on this "mystery carriage" is taking place from the inside out, with the internal walls being added first.
I'll keep you posted...
Andrew.
Re: (WH)WHR Rolling Stock
Is this mystery carriage perhaps the... Uhhh... Boston Lodge mystery carriage?
https://www.festipedia.org.uk/wiki/Carriage_Mystery
https://www.festipedia.org.uk/wiki/Carriage_Mystery
Re: (WH)WHR Rolling Stock
Maybe, maybe... A little to early to tell yet, perhaps things will become clearer when the windows start taking shape?JMORG wrote: ↑Mon Aug 24, 2020 2:44 pm Is this mystery carriage perhaps the... Uhhh... Boston Lodge mystery carriage?
https://www.festipedia.org.uk/wiki/Carriage_Mystery
Re: (WH)WHR Rolling Stock
Hi all,
It's taking a while, but I'm making some progress with FR Van 4, which now has look out duckets on both sides, and matchboarding on one...
I guess I'll carry on gradually working away at it over the winter with the aim of having it ready for spray painting when the weather warms up again in the spring...
Cheers,
Andrew.
It's taking a while, but I'm making some progress with FR Van 4, which now has look out duckets on both sides, and matchboarding on one...
I guess I'll carry on gradually working away at it over the winter with the aim of having it ready for spray painting when the weather warms up again in the spring...
Cheers,
Andrew.
Re: (WH)WHR Rolling Stock
It's looking great Andrew. You will have your'e work cut out putting them boards on, but it will look fabulous with your expert hands i'am sure.
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
- Peter Butler
- Driver
- Posts: 5261
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: (WH)WHR Rolling Stock
Very nice, slow and steady makes for best results.
The best things in life are free.... so why am I doing this?
- Old Man Aaron
- Trainee Driver
- Posts: 813
- Joined: Wed Oct 19, 2016 11:08 am
- Location: Sunshine Coast QLD, Australia
Re: (WH)WHR Rolling Stock
Well said, Peter.
That coach is coming on very well.
That coach is coming on very well.
Regards,
Aaron - Scum Class Works
Aaron - Scum Class Works
Re: (WH)WHR Rolling Stock
Well I am slow and steady but my results are rubbish......
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
- Peter Butler
- Driver
- Posts: 5261
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: (WH)WHR Rolling Stock
Don't be harsh on yourself Rod, I'm sure Anne loves your work.
The best things in life are free.... so why am I doing this?
Re: (WH)WHR Rolling Stock
I do! That guards van you built was particularly good, I thought...Peter Butler wrote: ↑Tue Oct 13, 2020 2:50 pm Don't be harsh on yourself Rod, I'm sure Anne loves your work.
Re: (WH)WHR Rolling Stock
Thanks lads. It's good to know a couple of you like my builds....
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Re: (WH)WHR Rolling Stock
It's been a while since I've added some WHR stock:
Modern WHHR carriage 6 in the current livery. Was unsure at first how it would look but now I think it looks great.
Brake van (the unnumbered one) in both liveries! Both Jurassic
The NWNGR van next to the Jurassic and modified IP wagons.
Porthole Bug box 12.
Lineside Hut Oakeley quarries coal waggon. I've cut 5mm from the top and bottom to get it more to the correct height.
Lineside Hut Slate waggon; modified to look more like the Rhosydd quarry waggons. Note the differences between it and the Binnie behind.
Modern WHHR carriage 6 in the current livery. Was unsure at first how it would look but now I think it looks great.
Brake van (the unnumbered one) in both liveries! Both Jurassic
The NWNGR van next to the Jurassic and modified IP wagons.
Porthole Bug box 12.
Lineside Hut Oakeley quarries coal waggon. I've cut 5mm from the top and bottom to get it more to the correct height.
Lineside Hut Slate waggon; modified to look more like the Rhosydd quarry waggons. Note the differences between it and the Binnie behind.
Re: (WH)WHR Rolling Stock
Very nice rolling stock. I do like the Lineside Hut slate wagon..
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Re: (WH)WHR Rolling Stock
Very nice JMORG!
I particularly like the WHR brake (I must get round to building one this winter!) and the "porthole" bugbox, a lovely looking carriage, I think. I wasn't too sure about the ("Prisoner" inspired, I think???) livery on the WHHR 4-wheeler either, but I agree, it looks great on your model.
I've been cracking on with some modelling myself recently, principally with another Phil Sharple kit, for an early FR coal wagon this time. I never seem able just to take a kit from the box and build it as per the instructions, and this one's been no exception... Firstly, I turned it inside out, so that the planking detail's on the inside - now stained with my usual vinegar and wire wool mixture. I've added new veneers of 0.5mm ply to represent the planking on the outside, which will enable me to sand back the paint for my favoured well-worn look. I've added a metal (well, plastic) plate over the curved buffer, and nail gem rivets over the etched ones on the strapping overlays. I think I'll put it all together and paint it next (although possibly not in that order), then I need to think about adding brake gear. Here it is so far:
Cheers all,
Andrew.
I particularly like the WHR brake (I must get round to building one this winter!) and the "porthole" bugbox, a lovely looking carriage, I think. I wasn't too sure about the ("Prisoner" inspired, I think???) livery on the WHHR 4-wheeler either, but I agree, it looks great on your model.
I've been cracking on with some modelling myself recently, principally with another Phil Sharple kit, for an early FR coal wagon this time. I never seem able just to take a kit from the box and build it as per the instructions, and this one's been no exception... Firstly, I turned it inside out, so that the planking detail's on the inside - now stained with my usual vinegar and wire wool mixture. I've added new veneers of 0.5mm ply to represent the planking on the outside, which will enable me to sand back the paint for my favoured well-worn look. I've added a metal (well, plastic) plate over the curved buffer, and nail gem rivets over the etched ones on the strapping overlays. I think I'll put it all together and paint it next (although possibly not in that order), then I need to think about adding brake gear. Here it is so far:
Cheers all,
Andrew.
Re: (WH)WHR Rolling Stock
Thats look interesting Andrew. Love to see it when you finish it. Maybe tomorrow...
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Who is online
Users browsing this forum: No registered users and 3 guests