Station Area Scenery
-
- Cleaner
- Posts: 95
- Joined: Sat Oct 20, 2012 4:15 pm
Station Area Scenery
We've had a baseboard with a station track layout outside for a couple of years now, but it is in a bit of a sorry state:
After reading Rik's excellent writeups on scored PVC foam for custom brickwork, I ordered a 5thk A3 sheet and had a go at a corner piece, which I thought came out OK so I moved on to something bigger and better...
I decided a simple first project could be a small water tower that would go between the run around loop tracks. I came up with a quick drawing showing the brickwork that I could follow to score the foamboard, hopefully minimising any mistakes on the actual model:
I also printed & laminated a ruler with the desired coursing & flemish bond marked, this is much better than counting out millimetres at a time!
The PVC foam was marked out, cut and filled as per Rik's writeups, resulting in a brick shell:
Time to move on to the tank. I threw together a design in Fusion360 for the panels and set the 3d printer off producing them. 4 sides and two roof pieces glue together, and corrugated sheeting is glued on top to produce a more interesting roof. The inspection hatch is also a 3d printed part.
The corrugated sheeting is produced from drink cans with a 3d printed roller tool:
Up until this point, the brick shell and tank were designed and built separately, not much thought given to how they would fit together. When I cut a slab for the tank bottom I realised the overhang looked a little excessive. 20 3d printed corbels later, I think the tank looks a little less precariously perched up there.
Now for the door. The outside frame was 3d printed, and plasticard scored for the wood-effect door itself. I regretted not putting windows in the long side walls, but this little one in the door will have to do. Bolt and hinges from the drink cans, handle from bent electronic component leads. My dad recently finished a riveting tool, so that got it's first try out on this door, the depth stop adjustment allows it to work quite well in both the thin sheet metal and 1.5thk plasticard. Could do with something like this for the brickwork perpend joint embossing...
To be continued...
I've finally decided to get on with scenery to smarten up that part of the layout. I'm hoping to chronicle the development of that area in this thread.After reading Rik's excellent writeups on scored PVC foam for custom brickwork, I ordered a 5thk A3 sheet and had a go at a corner piece, which I thought came out OK so I moved on to something bigger and better...
I decided a simple first project could be a small water tower that would go between the run around loop tracks. I came up with a quick drawing showing the brickwork that I could follow to score the foamboard, hopefully minimising any mistakes on the actual model:
I also printed & laminated a ruler with the desired coursing & flemish bond marked, this is much better than counting out millimetres at a time!
The PVC foam was marked out, cut and filled as per Rik's writeups, resulting in a brick shell:
Time to move on to the tank. I threw together a design in Fusion360 for the panels and set the 3d printer off producing them. 4 sides and two roof pieces glue together, and corrugated sheeting is glued on top to produce a more interesting roof. The inspection hatch is also a 3d printed part.
The corrugated sheeting is produced from drink cans with a 3d printed roller tool:
Up until this point, the brick shell and tank were designed and built separately, not much thought given to how they would fit together. When I cut a slab for the tank bottom I realised the overhang looked a little excessive. 20 3d printed corbels later, I think the tank looks a little less precariously perched up there.
Now for the door. The outside frame was 3d printed, and plasticard scored for the wood-effect door itself. I regretted not putting windows in the long side walls, but this little one in the door will have to do. Bolt and hinges from the drink cans, handle from bent electronic component leads. My dad recently finished a riveting tool, so that got it's first try out on this door, the depth stop adjustment allows it to work quite well in both the thin sheet metal and 1.5thk plasticard. Could do with something like this for the brickwork perpend joint embossing...
To be continued...
Re: Station Area Scenery
Brilliant! but then you are my son. Please keep it up Rich. ![:thumbup: :thumbup:](./images/smilies/thumbsup.gif)
![:thumbup: :thumbup:](./images/smilies/thumbsup.gif)
Re: Station Area Scenery
Excellent stuff. Nice to see how a foam board building ought to be constructed. You've surpassed my efforts tenfold. I really like your corrugator as well. I'm sure it must put less strain on the rollers passing the material through 'with the grain' as opposed to 'across the grain'.
Rik
Rik
- idlemarvel
- Trainee Fireman
- Posts: 136
- Joined: Tue May 28, 2019 1:59 pm
Re: Station Area Scenery
Very clever and very effective. ![:thumbright: :thumbright:](./images/smilies/icon_thumleft.gif)
![:thumbright: :thumbright:](./images/smilies/icon_thumleft.gif)
Dave Miller
currently building the 5" gauge Circle Line
currently building the 5" gauge Circle Line
Re: Station Area Scenery
Superb for any attempt , let alone a first try! Can't wait to see subsequent production.
Philip
- Peter Butler
- Driver
- Posts: 5260
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: Station Area Scenery
A masterpiece in ingenuity...... every new area of requirement covered with a make-it-work solution...... Brilliant!
I need a corrugation roller just like that too..... when you have time! I'm sure there will be a waiting list before long.
I need a corrugation roller just like that too..... when you have time! I'm sure there will be a waiting list before long.
The best things in life are free.... so why am I doing this?
Re: Station Area Scenery
That was my thought too, very impressive.Peter Butler wrote: βSat Jun 22, 2019 7:44 pm A masterpiece in ingenuity...... every new area of requirement covered with a make-it-work solution...... Brilliant!
I like the aesthetic too - I'm very much looking forward to seeing the finished station area...
All the best,
Andrew.
-
- Cleaner
- Posts: 95
- Joined: Sat Oct 20, 2012 4:15 pm
Re: Station Area Scenery
Managed to get the tower pretty much completed this weekend, mainly just painting and assembly, but also made up an external rising main:
Painting is always the part of a project I dread, but it didn't end up looking too bad I think. There are many finish issues I know are present, but I hope from a reasonable distance they can't be seen.
Might not be the final location above, I also need to look at making a water crane to go with it.
It's built up from a bit of brass pipe with the details 3d printed, the brackets and valve are just slipped over the end of the pipe and glued in place.Painting is always the part of a project I dread, but it didn't end up looking too bad I think. There are many finish issues I know are present, but I hope from a reasonable distance they can't be seen.
![:)](./images/smilies/icon_smile.gif)
Re: Station Area Scenery
First class, Rich.
You could attach the water crane arm to the face of the tower, rather than making a separate crane?
You could attach the water crane arm to the face of the tower, rather than making a separate crane?
Philip
Re: Station Area Scenery
Brilliant! Love it! So much detail. Makes me envious of your 3D printer - I was wondering where you got those brackets and fittings.
Rik
Rik
- idlemarvel
- Trainee Fireman
- Posts: 136
- Joined: Tue May 28, 2019 1:59 pm
Re: Station Area Scenery
Excellent piece of work, really looks the part.
Dave Miller
currently building the 5" gauge Circle Line
currently building the 5" gauge Circle Line
- -steves-
- Administrator
- Posts: 2445
- Joined: Thu Jul 28, 2011 1:50 pm
- Location: Cambridge & Peterborough
Re: Station Area Scenery
Absolutely amazing work, very well done, looks fantastic. Also loving the rivet tool, thats a wondrous bit of engineering ![:)](./images/smilies/icon_smile.gif)
![:)](./images/smilies/icon_smile.gif)
The buck stops here .......
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
- Peter Butler
- Driver
- Posts: 5260
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: Station Area Scenery
You have to feel justifiably proud of the end result, it is a wonderful piece of construction which will blend into its surroundings without creating attention, ..... that is the mark of success!
The best things in life are free.... so why am I doing this?
Re: Station Area Scenery
Peter Butler wrote: βSat Jun 22, 2019 7:44 pm
I need a corrugation roller just like that too..... when you have time! I'm sure there will be a waiting list before long.
I will be second in line for a roller please.
Your water tower is absolutely brilliant. Some great thought and ideas are put together to make a superb water tower.
ROD
Life is so easy when I run my trains.
![π](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f682.svg)
![π](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f683.svg)
![π](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f683.svg)
![π](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f683.svg)
![π](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f683.svg)
![π](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f683.svg)
![π](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f683.svg)
![π](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f683.svg)
![π](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f683.svg)
![π](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f683.svg)
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
![:thumbright: :thumbright:](./images/smilies/icon_thumleft.gif)
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Who is online
Users browsing this forum: No registered users and 1 guest