A stream for the Elderbury & District Light Railway - The saga continues
Re: A stream for the Elderbury & District Light Railway
Yes, I really like the family connection too. And you can stock Cuttle Brook with Cuttle Fish...
Re: A stream for the Elderbury & District Light Railway
LOL, yes, plays around that thought have gone through my mind as well! Actually, I rather suspect that it was probably originally known locally as the Cattle Brook rather than cuttle, which would make far more sense in terms of a medieval farming community. Late17th century hand writing isn't what you would call easily legible ( I had something of a struggle transcribing it!) and the parish priest who would have written it was quite likely not local and dealing with the accent on the Bucks/Oxfordshire border would have likely taxed his spelling somewhat!
Anyway, google maps still show it as Cuttle and there was a dispute about 30 years ago between Bucks CC and Oxfordshire CC as to who should unblock the Cuttle Brook bridge under the Icknield Way since the Cuttle Brook forms the county boundary.
However, I digress, yet again!
Philip
Re: A stream for the Elderbury & District Light Railway
+1 for Cuttle brook.
We have a similar 'mispronunciation' nearby. Ordnance Survey shows a local farm as Kepp House, whereas a locally produced earlier map clearly shows it as Cape House. However, OS wins out and the house nameplate is now Kepp, not Cape.
We have a similar 'mispronunciation' nearby. Ordnance Survey shows a local farm as Kepp House, whereas a locally produced earlier map clearly shows it as Cape House. However, OS wins out and the house nameplate is now Kepp, not Cape.
Phil
Sporadic Garden Railer who's inconsistencies know no bounds
My Line - https://gardenrails.org/forum/viewtopic ... 41&t=11077
Sporadic Garden Railer who's inconsistencies know no bounds
My Line - https://gardenrails.org/forum/viewtopic ... 41&t=11077
Re: A stream for the Elderbury & District Light Railway
+ 2 for Cuttle Brook…brilliant name..
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Re: A stream for the Elderbury & District Light Railway
Back on track now... or should that be, up the creek? Anyway, I've now got the water input system more or less sorted. The two spout pieces took just over 10 hours each, to print, and the two halves of the manifold section took about 7hours 25mins, each.
The following pictures are before more than a rough clean up, but with the two pairs glued together to check the fit. There are some gaps but easily fillable.
Tom, you asked about glue and in the end I've actually used Floplast rather than Plasticweld, since it is more tolerant of gaps and I don't want any leaks.
The two halves of the manifold and the two spout pieces glued together:
The two sub assemblies push fitted together:
Then hanging on the edge of the tray which will form the top end of the Cuttle Brook ( one day!). I still have to make the hose attachment/bend piece, but don't anticipate too much trouble with that.
I'm currently experimenting with mortar colour to try to get a reasonable match for the stone I'm using and I haver 4 mixes drying in the garage as I write this.
The stream bed is currently full of leaves, mostly ash and elder, the apples and willow haven't really started falling yet, but nothing much to do until its all dropped.
The following pictures are before more than a rough clean up, but with the two pairs glued together to check the fit. There are some gaps but easily fillable.
Tom, you asked about glue and in the end I've actually used Floplast rather than Plasticweld, since it is more tolerant of gaps and I don't want any leaks.
The two halves of the manifold and the two spout pieces glued together:
The two sub assemblies push fitted together:
Then hanging on the edge of the tray which will form the top end of the Cuttle Brook ( one day!). I still have to make the hose attachment/bend piece, but don't anticipate too much trouble with that.
I'm currently experimenting with mortar colour to try to get a reasonable match for the stone I'm using and I haver 4 mixes drying in the garage as I write this.
The stream bed is currently full of leaves, mostly ash and elder, the apples and willow haven't really started falling yet, but nothing much to do until its all dropped.
Philip
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Re: A stream for the Elderbury & District Light Railway
Glad you have chosen a different glue, FloPast from what I have read sounds like it will tolerate being outside all year round.
Re: A stream for the Elderbury & District Light Railway
That's one hell of a piece of work Philip, watching these goings on with interest.
Grant.
Grant.
- IrishPeter
- Driver
- Posts: 1400
- Joined: Wed Feb 23, 2011 3:24 am
- Location: 'Boro, VA
Re: A stream for the Elderbury & District Light Railway
I have to say that I am suitably impressed with the manifold. The 3D printer proving its worth for custom parts yet again.
Peter in Va
Peter in Va
Traffic Pattern? What pattern? Spuds out; grain in, but cattle, sheep and passengers are a lot less predictable.
Re: A stream for the Elderbury & District Light Railway
Thanks chaps.
Tom, I don't have any fears over using Plasticweld outside. It does what it's name says and welds the plastic surfaces together, so as long as the ABS is weather resistant, so would the joints be. I've been using it outside for years with no problems, but as I said Floplast is thicker and will take up any minor imperfections in the mating surfaces and that was my only reason for switching.
Tom, I don't have any fears over using Plasticweld outside. It does what it's name says and welds the plastic surfaces together, so as long as the ABS is weather resistant, so would the joints be. I've been using it outside for years with no problems, but as I said Floplast is thicker and will take up any minor imperfections in the mating surfaces and that was my only reason for switching.
Philip
- Soar Valley Light
- Driver
- Posts: 1451
- Joined: Sun Dec 08, 2013 5:18 pm
- Location: North West Leicestershire
Re: A stream for the Elderbury & District Light Railway
You're making a grand job of this Phil. I'm watching with great interest (it's still an ambition of my own that just wont go away!)
Are you using the Rennies to prevent any syphoning back? .............. I'll get my coat!
Andrew
Are you using the Rennies to prevent any syphoning back? .............. I'll get my coat!
Andrew
"Smith! Why do you only come to work four days a week?
"'cause I can't manage on three gaffer!"
"'cause I can't manage on three gaffer!"
- Peter Butler
- Driver
- Posts: 5253
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: A stream for the Elderbury & District Light Railway
That is certainly a piece of artistic engineering and most impressive.
The best things in life are free.... so why am I doing this?
Re: A stream for the Elderbury & District Light Railway
Agree with Peter, Soar Valley Light(Andrew), IrishPeter(Peter) and LNR(Grant) that is such an impressive bit of work.
Out of curiosity, or just plain being nosey, What do you estimate the cost of the build Phil.
Out of curiosity, or just plain being nosey, What do you estimate the cost of the build Phil.
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Re: A stream for the Elderbury & District Light Railway
A 1Kg reel of filament cost £31-95 and holds approx 330metres of filament.
The total filament used for the 4 parts I've already shown, plus the 2 parts for the bend pipe which I'm doing now, is approx 74.5metres. So the cost for the whole shooting match is approx £7-20.
Philip
Re: A stream for the Elderbury & District Light Railway
Thats such a great saving Phil, especially has you couldn’t get one as close to doing what you want it do…..
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Re: A stream for the Elderbury & District Light Railway
Ok, the next bit now works ( indoors in the bath!), using the pump I intend to use in the garden.
Philip
Re: A stream for the Elderbury & District Light Railway
Brilliant Phillip, It’s going to be a winner for sure.
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Re: A stream for the Elderbury & District Light Railway
By the way, what pump are you going to be using…
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Re: A stream for the Elderbury & District Light Railway
Rod,
Sorry only just realised you asked a question.
It's a Blagdon 'Force Hybrid 5000'
Philip
Re: A stream for the Elderbury & District Light Railway
Thanks Philip…It’s got some great reviews….
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Re: A stream for the Elderbury & District Light Railway
Some small progress. A few days go I managed to check and adjust the stream bed levels so today I took advantage of the nice weather to lay a temporary polythene liner and run the pump just to see it all working. As you'll see I need to adjust the top end to give myself a little more headroom, but other than that it all seems satisfactory. The plan is to remove the polythene and use it as an approximate template for the real liner, it should be a lot easier to cut it flat on the lawn rather than draped around the plants.
BTW, the bells at the beginning are not the opening of The Hunchback of Notre Dame, just that SWMBO has some wind chimes hanging there which kept catching my head!
BTW, the bells at the beginning are not the opening of The Hunchback of Notre Dame, just that SWMBO has some wind chimes hanging there which kept catching my head!
Philip
Who is online
Users browsing this forum: No registered users and 1 guest