Ex SECV Malcolm Moore

A place for discussing battery-electric locomotives, whether they're diesel, steam or even electric outline
Post Reply
User avatar
Tropic Blunder
Trainee Fireman
Trainee Fireman
Posts: 188
Joined: Sun Dec 06, 2015 4:02 am
Location: Australia
Contact:

Ex SECV Malcolm Moore

Post by Tropic Blunder » Sat Sep 29, 2018 1:28 am

Hi all some photos of my latest project, 3d printed body, buffer beams and doors on a modified bachmann little big haulers chassies. Basically i just cut anything remotely steam engine like off with a dremel and epoxied my new pieces on. Loco is radio controlled with deltang equipment with 8 cells just squeezing in.
42266896_1930702213688733_888182971771650048_n.jpg
42266896_1930702213688733_888182971771650048_n.jpg (94.54 KiB) Viewed 3553 times
The real locomotives were built by Malcolm Moore engineering (in Melbourne Australia where i live) for the state electricity commission of Victoria for the construction of the Kiewa Dam. Upon completion 4 were sent to other civil engineering projects in NSW and QLD, one went to forestry work in WA (and survives to this day) one was retained for use at the SECV railway in Yallourn (the subject of my model) and the remainder were sent to Tasmania to be converted into the TGR U class. two were given the U class treatment but converted to Meter gauge and ended up in Thailand as part of the colombo plan.
42044819_1932068130218808_3915374190844182528_n.jpg
42044819_1932068130218808_3915374190844182528_n.jpg (56.11 KiB) Viewed 3553 times
42447154_10157699406840278_4516676664620482560_o.jpg
42447154_10157699406840278_4516676664620482560_o.jpg (156.5 KiB) Viewed 3553 times
42430159_1932067853552169_6615673765390974976_n.jpg
42430159_1932067853552169_6615673765390974976_n.jpg (116.92 KiB) Viewed 3553 times
Jake

Image

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: Ex SECV Malcolm Moore

Post by FWLR » Sat Sep 29, 2018 7:36 am

Very nice indeed. :thumbright:

Dunitrong
Cleaner
Cleaner
Posts: 15
Joined: Thu Jun 13, 2013 4:36 pm
Location: United Kingdom

Re: Ex SECV Malcolm Moore

Post by Dunitrong » Sun Sep 30, 2018 9:46 pm

That looks nice and chunky. Did you print it yourself?

User avatar
Tropic Blunder
Trainee Fireman
Trainee Fireman
Posts: 188
Joined: Sun Dec 06, 2015 4:02 am
Location: Australia
Contact:

Re: Ex SECV Malcolm Moore

Post by Tropic Blunder » Mon Oct 01, 2018 1:04 pm

Thanks guys, Yeah i did print it myself on a wombot drafter. No drawings are available so i used a TGR U class drawing to get myself in the ball park and then went off a photo i found.
Jake

Image

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests