Otto bash
- Soar Valley Light
- Driver
- Posts: 1451
- Joined: Sun Dec 08, 2013 5:18 pm
- Location: North West Leicestershire
Re: Otto bash
That's a really lovely looking loco Rik. It's absolutely dripping in character. I look froward to seeing her carrying full livery and out at work on your lovely line.
Andrew
Andrew
"Smith! Why do you only come to work four days a week?
"'cause I can't manage on three gaffer!"
"'cause I can't manage on three gaffer!"
- Killian Keane
- Trainee Fireman
- Posts: 194
- Joined: Wed Nov 16, 2016 9:17 pm
Re: Otto bash
She looks a stunner Rik, quite a transformation from the original otto, well done
Blokes with tea can build anything
Re: Otto bash
Love this Rik, can you make me one lol.
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Re: Otto bash
Wow! what a difference some grey makes. As Andrew said, dripping with character, love the stays on the spectacle plate. Great job Rik. Would look good in a rather faded livery me thinks (hint, hint)
Grant.
Grant.
Re: Otto bash
Thanks chaps. It's the usual case, now I've made one I know how I ought to have done the job. Not sure I'd want to make another, though - part of the fun is figuring out how to solve each problem as it arises.
When she's finished, I'd say my outlay; secondhand Otto, batteries, radio control, materials, paint, glue, solder etc.; will be around Β£120. A lot cheaper than buying an 'off the shelf' battery loco such as a Roundhouse Little John diesel (Β£582). And I also have the satisfaction of running something which won't be seen on any other garden railway.
Rik
When she's finished, I'd say my outlay; secondhand Otto, batteries, radio control, materials, paint, glue, solder etc.; will be around Β£120. A lot cheaper than buying an 'off the shelf' battery loco such as a Roundhouse Little John diesel (Β£582). And I also have the satisfaction of running something which won't be seen on any other garden railway.
To answer your tongue in cheek question, Rod , if I totted up the hours, and then even only charged Β£10/hour, it would make the cost of making one for someone else prohibitive - probably about the same as a new live steam loco. I'd be more than happy to guide someone through the build process though.
Rik
Re: Otto bash
Wow Rik that is a great price and yes you are right, it probably would be the same has an R-T-R, but has you say it is unique and it certainly gets my vote for the best kit bashed model of the year.ge_rik wrote: βSun Aug 27, 2017 7:52 am Thanks chaps. It's the usual case, now I've made one I know how I ought to have done the job. Not sure I'd want to make another, though - part of the fun is figuring out how to solve each problem as it arises.
When she's finished, I'd say my outlay; secondhand Otto, batteries, radio control, materials, paint, glue, solder etc.; will be around Β£120. A lot cheaper than buying an 'off the shelf' battery loco such as a Roundhouse Little John diesel (Β£582). And I also have the satisfaction of running something which won't be seen on any other garden railway.
To answer your tongue in cheek question, Rod , if I totted up the hours, and then even only charged Β£10/hour, it would make the cost of making one for someone else prohibitive - probably about the same as a new live steam loco. I'd be more than happy to guide someone through the build process though.
Rik
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
- Peter Butler
- Driver
- Posts: 5254
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: Otto bash
Thanks for the 'works grey' images Rik, I just knew it would show the model to its best advantage. Sorry not to have replied earlier but I have been separated from my laptop due to a visit to the Great Dorset Steam Fair for the first time...... pictures may follow in another thread.
With even more detailing to come this has to be a top class conversion.
With even more detailing to come this has to be a top class conversion.
The best things in life are free.... so why am I doing this?
Re: Otto bash
Great pics Rik - love all the detail - the grey does bring it out
Where did I put that uncoupler?
Re: Otto bash
Part 12 - Emerging from the paint shop
Her first outing from the paintshop.
I decided the spectacle plate was too low and so raised it by around 8mm. It was a bit of an effort but I feel happier now that she looks a little more like the original - slightly ungainly and, as someone said, slightly Emett-like.
There is, of course, still plenty to do. The driver doesn't have any knobs to turn, levers to pull or gauges to tap.
..... and then there's a a fine array of copper pipework which needs to be arrayed over the boiler and running plate.
So, a couple more days' tweaking and I think she'll be ready to join the roster.
Mind you, she does look a bit too pristine and shiny for a working loco.................
Rik
Her first outing from the paintshop.
I decided the spectacle plate was too low and so raised it by around 8mm. It was a bit of an effort but I feel happier now that she looks a little more like the original - slightly ungainly and, as someone said, slightly Emett-like.
There is, of course, still plenty to do. The driver doesn't have any knobs to turn, levers to pull or gauges to tap.
..... and then there's a a fine array of copper pipework which needs to be arrayed over the boiler and running plate.
So, a couple more days' tweaking and I think she'll be ready to join the roster.
Mind you, she does look a bit too pristine and shiny for a working loco.................
Rik
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Re: Otto bash
I am not worthy to view your Plastikard skills Rik, great job all the same!
Re: Otto bash
Great modelling Rik, hope to achieve some modicum of skill such has yourβs...
ROD
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Life is so easy when I run my trains.
https://gardenrails.org/forum/viewtopic ... 41&t=11364
https://www.youtube.com/@fairywoodlightrailway
Re: Otto bash
And so to Green - as others have said, very impressive!
Where did I put that uncoupler?
Re: Otto bash
Thanks folks
I did a quick test run yesterday and I must admit, she does look good chuffing through the foliage.
I've been out all day for a walk in the Peak District (the Roaches) so no chance yet to make a start on the titivations. I'll keep you posted as to developments. I know from past experience that it's a bit like housebuilding - the finishing touches can take as long as the major engineering which preceded it.
Rik
I did a quick test run yesterday and I must admit, she does look good chuffing through the foliage.
I've been out all day for a walk in the Peak District (the Roaches) so no chance yet to make a start on the titivations. I'll keep you posted as to developments. I know from past experience that it's a bit like housebuilding - the finishing touches can take as long as the major engineering which preceded it.
Rik
- IrishPeter
- Driver
- Posts: 1400
- Joined: Wed Feb 23, 2011 3:24 am
- Location: 'Boro, VA
Re: Otto bash
She looks reet grand! I know what you mean about the titivating part of the process. It always takes me about four times as long to fit all the various bits and pieces to my carriages as it does to make the basic body. The motivation to make forwards progress declines significantly once I have something that runs.
Cheers,
Peter in Va
Cheers,
Peter in Va
Traffic Pattern? What pattern? Spuds out; grain in, but cattle, sheep and passengers are a lot less predictable.
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Re: Otto bash
I think I have the same mentality!IrishPeter wrote: βWed Aug 30, 2017 8:00 pm The motivation to make forwards progress declines significantly once I have something that runs.
Re: Otto bash
Splendid looking job Rik. I have a very soft spot for English 3ft gauge stuff. The extent of some of the systems was considerable and sadly not very well remembered.
If at first you don't succeed, use a bigger hammer!
Re: Otto bash
I agree Jim. Three foot gauge systems seem to me to have been very workmanlike - though the Southwold and the the Rye & Camber (and to some extent the original Ravenglass & Eskdale) were a bit more whimsical - maybe it's because they were seaside railways.......
I have a soft spot for the Southwold and am delighted that the SR Trust has now, at long last, somewhere to run trains - albeit to a limited extent (for now....). They're talking now of making a replica Cleminson Moy open wagon.
Happy days
Rik
PS - See you on Saturday all being well.
Re: Otto bash
I'm very late to this thread Rik, and have been playing catch up on the forum this week, having spent a fortnight in the Midlands working on my daughter's house, so all I can do is echo what everyone else has said - a brilliant piece of kitbashing/remodelling. I used to make model boats, and was more drawn to the detailing side of things, and scrounging odd items for detail parts becomes a bit of a hobby! Sadly, the easy access to digital photography wasn't around then, so all my photo's tended to be generic shots of the completed models.
Your solution to the sound problem is ingenious - but as the firebox door is open, can you find room for a flicker effect red LED?
Brilliant job
Your solution to the sound problem is ingenious - but as the firebox door is open, can you find room for a flicker effect red LED?
Brilliant job
Phil
Sporadic Garden Railer who's inconsistencies know no bounds
My Line - https://gardenrails.org/forum/viewtopic ... 41&t=11077
Sporadic Garden Railer who's inconsistencies know no bounds
My Line - https://gardenrails.org/forum/viewtopic ... 41&t=11077
Who is online
Users browsing this forum: No registered users and 5 guests