PLine Fowler Resilient Diesel in 16mm
PLine Fowler Resilient Diesel in 16mm
Hello All,
Happy to announce our new product, the Fowler Resilient diesel locomotive in 16mm scale.
Design based on the Fowler Resilient Saurashtra shunter that worked in the Betty tramways of Rajkot, India. Sister loco of the Peldon Fowler Resilient.
Dimensions: L=187mm over buffer beams, W=87mm, H=133 above rail top
-all brass chassis and body shell
-actual scale rivet work on both body and chassis
-photo etched body overlays, nameplates etc
-cast/machined brass headlamps, sand boxes, leaf springs, air horn, radiator filler caps hand rails, smoke stack, and air filter
-die formed brass engine louvers
-powered by two 9v dc motors and all metal drive trains powering both axles
- directional lights
-front and rear windows glazed
-can easily be adapted for rc with sound
-insulated steel wheels for 32mm gauge
-supplied with machined aluminum multi height buffer couplers.
More information available from our partner in the U.K Barfell
Contact: Mr. Chris Shanks
URL: http://barfell.co.uk
and our website: http://pline.co.in
Regards
Paul Nilanjan
P.S: photos of the production model attached (still work in progress)
Happy to announce our new product, the Fowler Resilient diesel locomotive in 16mm scale.
Design based on the Fowler Resilient Saurashtra shunter that worked in the Betty tramways of Rajkot, India. Sister loco of the Peldon Fowler Resilient.
Dimensions: L=187mm over buffer beams, W=87mm, H=133 above rail top
-all brass chassis and body shell
-actual scale rivet work on both body and chassis
-photo etched body overlays, nameplates etc
-cast/machined brass headlamps, sand boxes, leaf springs, air horn, radiator filler caps hand rails, smoke stack, and air filter
-die formed brass engine louvers
-powered by two 9v dc motors and all metal drive trains powering both axles
- directional lights
-front and rear windows glazed
-can easily be adapted for rc with sound
-insulated steel wheels for 32mm gauge
-supplied with machined aluminum multi height buffer couplers.
More information available from our partner in the U.K Barfell
Contact: Mr. Chris Shanks
URL: http://barfell.co.uk
and our website: http://pline.co.in
Regards
Paul Nilanjan
P.S: photos of the production model attached (still work in progress)
Last edited by pline on Wed Jul 13, 2016 4:05 am, edited 2 times in total.
www.pline.co.in
bUILT IN bRASS
bUILT IN bRASS
progress
www.pline.co.in
bUILT IN bRASS
bUILT IN bRASS
Hello Brian,
i am aware of pdf models 3d printed resilient kit available at GBP 120. I will be pricing ours, in brass, within GBP 280 ex works.
regards
Paul Nilanjan
i am aware of pdf models 3d printed resilient kit available at GBP 120. I will be pricing ours, in brass, within GBP 280 ex works.
regards
Paul Nilanjan
www.pline.co.in
bUILT IN bRASS
bUILT IN bRASS
- dougrail
- Driver
- Posts: 1532
- Joined: Mon Mar 14, 2011 5:11 pm
- Location: Salopia; on the edge of Arcadia
Without being critical; PLine's edition may be targeted at a different market. The 3dPrinted one looks the biz and will cheerfully haul round wagons but won't be powerful enough to move dead locos such as the RWM Salem or the RH Cricceths?, so this may be for the 'higher power' market?
Just my $0.02
Just my $0.02
Body shell now complete
www.pline.co.in
bUILT IN bRASS
bUILT IN bRASS
Fowler Resilient now complete
Hello All,
the 16mm PLine fowler is now ready to take on the world.
More information on our website http://pline.co.in
Regards
Paul Nilanjan
the 16mm PLine fowler is now ready to take on the world.
More information on our website http://pline.co.in
Regards
Paul Nilanjan
www.pline.co.in
bUILT IN bRASS
bUILT IN bRASS
- paullad1984
- Fireman
- Posts: 272
- Joined: Sat Mar 09, 2013 11:18 am
- Location: United Kingdom
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
- -steves-
- Administrator
- Posts: 2445
- Joined: Thu Jul 28, 2011 1:50 pm
- Location: Cambridge & Peterborough
From the 3 websites listed I can not find anything on the 2 websites that actually work about holding stock of this or the Darjeeling loco. Where and how do I got hold of one or both of these???
The buck stops here .......
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
16mm Fowler Resilient Anatomy
Below are the answers:tom_tom_go:118921 wrote:That is a great looking loco.
What electronics does it come with? It would be good to know motor installed and drive system (worm, belt, etc)...
Model fitted with two 12v dc motors driving both axles using two 1:17 all metal worm & wheel drives.
Model available with or without manual MOSFET PWM speed regulator. Speed regulator knob & center off 3 position direction switch in cab. Directional LED head/tail lamps are standard fixtures
The locos can be easily converted to RC.
You can contact Chris Shanks of Barfell, in the U.K for the Darjeeling NDM6 & the Fowler Resilient. His website is http://barfell.co.uk
(presently being reconstructed, should be up in the next few days)
In continental Europe people can contact Trading 1617 at:
http://trading1617.jimdo.com/contact/
In the US Ken Matticks can be reached through email at: matticks@airmail.net
Regards
paul nilanjan
www.pline.co.in
bUILT IN bRASS
bUILT IN bRASS
Who is online
Users browsing this forum: No registered users and 2 guests