Discussion of Rolling Stock related topics should go here
-
Alan P
- Trainee Fireman
- Posts: 194
- Joined: Sun Aug 24, 2014 6:43 am
- Location: Salisbury, UK
-
Contact:
Post
by Alan P » Sat Aug 15, 2015 8:15 am
So impressed was i by Phil Sharples Small Welsh Coal Wagons that i decide to try another one of his kits.
This is his Small Tipper Wagon Kit. It only arrived yesterday so just a quick pic of the parts for now.
-
Alan P
- Trainee Fireman
- Posts: 194
- Joined: Sun Aug 24, 2014 6:43 am
- Location: Salisbury, UK
-
Contact:
Post
by Alan P » Sat Aug 15, 2015 10:33 am
Well the first one is complete apart from paint and couplings. I've made a crude attempt to get it to tip.
Hope Phil won't mind me chopping his wagons about too much
-
MDLR
- Driver
- Posts: 4027
- Joined: Thu Jan 15, 2009 10:38 pm
- Location: Near Ripley, Derbyshire, UK
-
Contact:
Post
by MDLR » Sat Aug 15, 2015 5:14 pm
Oh, dear - I see another rake of wagons coming on (which will make three new ones.............)
-
tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
-
Contact:
Post
by tom_tom_go » Sat Aug 15, 2015 5:54 pm
Great little wagon you have there.
The copper/brass additions would look the part if you chemically blackened them.
-
Alan P
- Trainee Fireman
- Posts: 194
- Joined: Sun Aug 24, 2014 6:43 am
- Location: Salisbury, UK
-
Contact:
Post
by Alan P » Sat Aug 15, 2015 9:06 pm
Paint & various chemicals will be applied shortly.
Last edited by
Alan P on Tue Aug 25, 2015 9:15 pm, edited 1 time in total.
-
Howardws
- Cleaner
- Posts: 47
- Joined: Sun Oct 12, 2014 1:28 pm
Post
by Howardws » Sun Aug 16, 2015 11:52 am
I have one of these wagons and think it is superb for the price. I hope to run a couple of rakes for my chalk quarry. I have a problem though. The chassis is 28mm wide and the wheels have a boss on the back so it is impossible to set the wheels at 28mm back to back. I've removed the bosses and can now get an acceptable 28.2mm back to back. Have I assembled the wagon incorrectly or is it a design fault?
-
Alan P
- Trainee Fireman
- Posts: 194
- Joined: Sun Aug 24, 2014 6:43 am
- Location: Salisbury, UK
-
Contact:
Post
by Alan P » Sun Aug 16, 2015 2:01 pm
I've just measured the wheels back to back and on mine the distance is 29.5mm. That's with the wheels as they came, i agree it's not
the optimal 28mm but my little wagon runs around my line fine. I have quite tight curves (30" radius) and i'm using Peco 32mm track.
-
Howardws
- Cleaner
- Posts: 47
- Joined: Sun Oct 12, 2014 1:28 pm
Post
by Howardws » Sun Aug 16, 2015 2:48 pm
I'm hoping to use Chad Valley track in my quarry and the radius is about 15"! The wagon wouldn't go round without the wheels lifting. 28mm is the 32mm gauge back to back standard. Perhaps Wonkeyblue will see this and make his frames narrower!
-
Chris Cairns
- Driver
- Posts: 2366
- Joined: Mon Oct 29, 2007 7:25 pm
- Location: Glasgow, Scotland
Post
by Chris Cairns » Fri Aug 21, 2015 10:24 am
I've got a similar problem with his Beer Barrel Wagon kit.
There was no problems during a dry build, however the slots for the chassis frames appear to not have enough sideways allowance after you have painted the clear plastic (acrylic) chassis frames. Fortunately they are flexible enough to be bent inwards to allow a standard 28mm back to back without the wheels binding up.
Chris Cairns
-
90733
- Driver
- Posts: 1952
- Joined: Wed Dec 16, 2009 6:17 pm
- Location: West Yorkshire
-
Contact:
Post
by 90733 » Sun Aug 23, 2015 11:58 am
My dads seen this and looking into it
Isn't the back to back 28.4mm though? I've always thought it was?
Thanks
Jack
-
Howardws
- Cleaner
- Posts: 47
- Joined: Sun Oct 12, 2014 1:28 pm
Post
by Howardws » Tue Aug 25, 2015 7:56 am
The 16mm association standard is 28mm - I've just checked!
-
90733
- Driver
- Posts: 1952
- Joined: Wed Dec 16, 2009 6:17 pm
- Location: West Yorkshire
-
Contact:
Post
by 90733 » Tue Aug 25, 2015 6:46 pm
Howardws:112955 wrote:The 16mm association standard is 28mm - I've just checked!
Cheers, from what he's said, I think he's going to thin the frames down.
Thanks
Jack
-
GTB
- Driver
- Posts: 1559
- Joined: Sat Mar 05, 2011 2:46 pm
- Location: Australia
Post
by GTB » Wed Aug 26, 2015 10:40 am
90733:112873 wrote:
Isn't the back to back 28.4mm though? I've always thought it was?
28.4mm is the back to back for coarse scale O gauge wheels in model railway standards in much of the world eg. North America (NMRA) Europe (NEM) and Aust. (AMRA), all of which are compatible.
It's only that rainy little island off the French coast that uses 28mm.......
Apparently the BMRSB had something called a 'unified' standard in the early '50s that had a B to B of 28.5mm so that coarse scale wheels could run on fine scale track. Now sunk without trace, just like the BRMSB........
Regards,
Graeme
-
Alan P
- Trainee Fireman
- Posts: 194
- Joined: Sun Aug 24, 2014 6:43 am
- Location: Salisbury, UK
-
Contact:
Post
by Alan P » Wed Aug 26, 2015 4:08 pm
-
Andrew
- Moderator
- Posts: 3276
- Joined: Tue Jul 03, 2012 1:33 pm
- Location: Bristol, UK
-
Contact:
Post
by Andrew » Wed Aug 26, 2015 8:43 pm
That looks fantastic! I wasn't sure about the MDF finish, but you've made it look very realistic... I must resist buying some...
Andrew
-
Dr. Bond of the DVLR
- Retired Director
- Posts: 4485
- Joined: Tue Jun 09, 2009 9:43 pm
- Location: Suffolk
-
Contact:
Post
by Dr. Bond of the DVLR » Wed Aug 26, 2015 10:00 pm
Cracking - I can just picture a rake of those rattling along on an ironstone tramway.
The railway which people forgot
(to build)
-
Alan P
- Trainee Fireman
- Posts: 194
- Joined: Sun Aug 24, 2014 6:43 am
- Location: Salisbury, UK
-
Contact:
Post
by Alan P » Wed Aug 26, 2015 10:14 pm
Thanks Andrew. Painting is very definitely not my strong point but i asked Phil how he achieved the finish on the ebay listing photographs and just followed his instructions.
Still don't think mine is as good as his but it's not too shabby
-
Alan P
- Trainee Fireman
- Posts: 194
- Joined: Sun Aug 24, 2014 6:43 am
- Location: Salisbury, UK
-
Contact:
Post
by Alan P » Wed Aug 26, 2015 10:17 pm
Mr. Bond of the DVLR:113012 wrote:Cracking - I can just picture a rake of those rattling along on an ironstone tramway.
Thanks Zach. Phil dosen't appear to have any more Tipper Wagons lsited at the moment but i'm quite taken with his Flat Wagon Kit With Slatted Ends. Oh dear, here we go again
-
Annie
- Fireman
- Posts: 471
- Joined: Tue Aug 28, 2012 4:45 pm
- Location: New Zealand
Post
by Annie » Fri Jan 29, 2016 11:25 pm
I really like the look of these tipper wagons, but unfortunately Phil doesn't do overseas postage
What has Reality done for you lately?
-
Alan P
- Trainee Fireman
- Posts: 194
- Joined: Sun Aug 24, 2014 6:43 am
- Location: Salisbury, UK
-
Contact:
Post
by Alan P » Sat Jan 30, 2016 7:47 am
Annie:115962 wrote:I really like the look of these tipper wagons, but unfortunately Phil doesn't do overseas postage
If you want one or some Annie i'd be happy to purchase them and ship them out to you.
Who is online
Users browsing this forum: No registered users and 13 guests