A row of quarry workers cottages
Re: A row of quarry workers cottages
I like the look of those blue clamps - 3D printed?
Rik
Rik
-
- Trainee Driver
- Posts: 978
- Joined: Fri Oct 05, 2018 6:30 pm
- Location: South West Wales
Re: A row of quarry workers cottages
To my eye, it's not just the roof looking better - somehow, at least from the photos, it makes the doors look better proportioned too. Perhaps because, relative to the roof height, they are no longer as tall...?
Did you paint on the ABS directly? How did it take it? Or did you prime before painting with masonry paint?Just as an aside I have painted the walls with white paint intended for house walls. It took 3 coats, and the intention is that it looks like "white wash".The cottages in the museum are set out as they were in different eras - and the left hand two represent earlier period. Whitewashed walls and dark brown paint on windows and doors. Typically Victorian I suppose. ( I remember my grandfathers outbuildings being whitewashed - and having to be careful not to have it rub off onto your clothes. ) So with the walls painted I can prepare the windows and doors and fit them.
I use clay paint - my old thick walls were probably mortared with a mix using sand from the beach - so the more breathable they can be the better. But it also rubs off easily, though not as easily as lime wash (which the interior walls in my Dad's cottage are painted with - again for breathability!) But for a model regular masonry paint is certainly better, the clay paint or lime wash would wash off in the rain, and there's no advantage in letting the ABS breath!
-
- Trainee Driver
- Posts: 978
- Joined: Fri Oct 05, 2018 6:30 pm
- Location: South West Wales
-
- Trainee Driver
- Posts: 978
- Joined: Fri Oct 05, 2018 6:30 pm
- Location: South West Wales
Re: A row of quarry workers cottages
It has taken a while to print and fit the roof. There were 16 separate sections which each took 5 hours to print - and of course a life to lead at the same time.
So finally the roof in place:
The underside of the roof is bonded to the framework by using Acetone as a "plastic weld", and around the edges a fillet of ABS/Acetone slurry has been applied. I have found a syringe (intended for measuring animal medicine) which seems to be made from some polyethylene like material which isn't effected by acetone. It has been really useful for applying that fillet of slurry as if I was using a mastic gun.
So the chimneys are now printing - 17 hours for two of them.
I have also stopped fitting windows and doors while I think over what Im doing. I left some figures and post boxes made last year on the resin printer outside for a week and they have burst apart. I was resin printing the doors and windows - and this has made me think again. Of course I didn't write down what I was doing on the resin printer - so I don't know what resin I used in each case and I have tried a few different resins over the last 12 months. So I will try leaving a model made from the current resin outside for a week to see what happens. Otherwise I will filament print the windows etc.
I should really add that I will fit ridge tiles when the chimneys are in place - which explains why the roof ridge looks unfinished.
Trevor
So finally the roof in place:
The underside of the roof is bonded to the framework by using Acetone as a "plastic weld", and around the edges a fillet of ABS/Acetone slurry has been applied. I have found a syringe (intended for measuring animal medicine) which seems to be made from some polyethylene like material which isn't effected by acetone. It has been really useful for applying that fillet of slurry as if I was using a mastic gun.
So the chimneys are now printing - 17 hours for two of them.
I have also stopped fitting windows and doors while I think over what Im doing. I left some figures and post boxes made last year on the resin printer outside for a week and they have burst apart. I was resin printing the doors and windows - and this has made me think again. Of course I didn't write down what I was doing on the resin printer - so I don't know what resin I used in each case and I have tried a few different resins over the last 12 months. So I will try leaving a model made from the current resin outside for a week to see what happens. Otherwise I will filament print the windows etc.
I should really add that I will fit ridge tiles when the chimneys are in place - which explains why the roof ridge looks unfinished.
Trevor
-
- Trainee Driver
- Posts: 664
- Joined: Wed Sep 21, 2011 9:24 pm
- Location: kent england
Re: A row of quarry workers cottages
I like them. Excellent work
Re: A row of quarry workers cottages
They look great with the roof on.
-
- Trainee Driver
- Posts: 978
- Joined: Fri Oct 05, 2018 6:30 pm
- Location: South West Wales
Re: A row of quarry workers cottages
that is the cottages almost completed. Chimneys on, ridge tiles fitted, doors in place - just a couple of windows to fit:
Almost ready to complete the painting.
I am now wondering if I can print front gardens to fit in front of the cottages to copy what is in an old photo of Tan-y-grisau station.
Trevor
Almost ready to complete the painting.
I am now wondering if I can print front gardens to fit in front of the cottages to copy what is in an old photo of Tan-y-grisau station.
Trevor
- Peter Butler
- Driver
- Posts: 5244
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: A row of quarry workers cottages
They do look wonderful Trevor, a superb addition to your line.
I'm intrigued by the circular cut-outs above the doors.... are they intended to be glazed.
I'm intrigued by the circular cut-outs above the doors.... are they intended to be glazed.
The best things in life are free.... so why am I doing this?
Re: A row of quarry workers cottages
All looking great Trevor, I do like the angled slates on top of the chimneys - add a lot of prototypical character.
Don't know what picture you are working to, but drawing and printing flowers ain't gonna be easy!Trevor Thompson wrote: ↑Sat Oct 01, 2022 10:34 am
I am now wondering if I can print front gardens to fit in front of the cottages to copy what is in an old photo of Tan-y-grisau station.
Philip
-
- Trainee Driver
- Posts: 978
- Joined: Fri Oct 05, 2018 6:30 pm
- Location: South West Wales
Re: A row of quarry workers cottages
Yes they are to be glazed - and they are a feature of the real thing.Peter Butler wrote: ↑Sat Oct 01, 2022 10:50 am They do look wonderful Trevor, a superb addition to your line.
I'm intrigued by the circular cut-outs above the doors.... are they intended to be glazed.
Trevor
-
- Trainee Driver
- Posts: 978
- Joined: Fri Oct 05, 2018 6:30 pm
- Location: South West Wales
Re: A row of quarry workers cottages
I was sort of thinking it might be more of a "yard" with things like bicycles leaning on walls and such additions - what would a victorian dust bin look like?philipy wrote: ↑Sat Oct 01, 2022 11:38 am All looking great Trevor, I do like the angled slates on top of the chimneys - add a lot of prototypical character.
Don't know what picture you are working to, but drawing and printing flowers ain't gonna be easy!Trevor Thompson wrote: ↑Sat Oct 01, 2022 10:34 am
I am now wondering if I can print front gardens to fit in front of the cottages to copy what is in an old photo of Tan-y-grisau station.
Trevor
Re: A row of quarry workers cottages
That sounds more like the back yard than the front, to me, but I could be wrong. I have in mind that they would have been very proud of their few flowers or perhaps vegetables? Sort of like the Northern mining communities and their vegetable shows?Trevor Thompson wrote: ↑Sat Oct 01, 2022 12:11 pm
I was sort of thinking it might be more of a "yard" with things like bicycles leaning on walls and such additions - what would a victorian dust bin look like?
Trevor
This doesn't help much but might be of interest:
https://www.litterbins.co.uk/blog/rubbi ... n-britain/
Philip
-
- Trainee Driver
- Posts: 978
- Joined: Fri Oct 05, 2018 6:30 pm
- Location: South West Wales
Re: A row of quarry workers cottages
I suppose I was thinking that perhaps the side facing the railway track could be modelled as the "back yard". You cant really see from the photo which it might be.
Trevor
Trevor
-
- Trainee Driver
- Posts: 978
- Joined: Fri Oct 05, 2018 6:30 pm
- Location: South West Wales
Re: A row of quarry workers cottages
The cottages are now complete.
So a last photo as they are on their way to the garden:
I am now turning my attention to the station building from Tan-y-Grisau, which will sit alongside this row of cottages.
I will come back to the gardens, walls, and the block of outside toilets which I think will add to the "ambiance" at this station in due course.
Trevor
PS I am about to add the stl files to the 3 D printing files.
So a last photo as they are on their way to the garden:
I am now turning my attention to the station building from Tan-y-Grisau, which will sit alongside this row of cottages.
I will come back to the gardens, walls, and the block of outside toilets which I think will add to the "ambiance" at this station in due course.
Trevor
PS I am about to add the stl files to the 3 D printing files.
Re: A row of quarry workers cottages
Very nice!!!
Rik
Rik
- Peter Butler
- Driver
- Posts: 5244
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: A row of quarry workers cottages
They look wonderful Trevor, when the freshness has worn off the paint they will look even better.
The best things in life are free.... so why am I doing this?
Re: A row of quarry workers cottages
Great stuff Trevor. As has been said, a bit of weathering will add even more charm.
Philip
Who is online
Users browsing this forum: No registered users and 4 guests