Certainly worth looking into. Obviously the smoother and flatter the surface it's going on to is, the the better the adhesive will hold it done. In my case with not a gram of filler, filler primer and not seen a bit of sandpaper in it's life, the adhesion can be a bit of an issue to get it from the transfer paper to the modelTrevor Thompson wrote: ↑Tue Feb 22, 2022 9:01 pm Wow - that is worth looking into.
It looks as though the complex lining on Corris railway coaches (for example) - with all the intersecting celtic curls might be possible this way.
Trevor
Mountaineer
- -steves-
- Administrator
- Posts: 2443
- Joined: Thu Jul 28, 2011 1:50 pm
- Location: Cambridge & Peterborough
Re: Mountaineer
The buck stops here .......
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Re: Mountaineer
Funnily enough I've been trying to remember something I read about ages ago, about converting 3d printers. My memory was telling me it was about fitting a laser cutter head, not vinyl cutter, but same principle.
Philip
Re: Mountaineer
Really impressed by the lining. I've been contemplating one of these cutters for a while (it's on the list of desired gadgets along with a with a resin printer!)
Are you able to cut lettering with it?
Are you able to cut lettering with it?
- -steves-
- Administrator
- Posts: 2443
- Joined: Thu Jul 28, 2011 1:50 pm
- Location: Cambridge & Peterborough
Re: Mountaineer
Yes, it can cut any shape that can be designed in CAD. I can cut down to about 0.5mm lines, but they are a little difficult to put on things and to "weed" (pick out the bits you don't want)
The buck stops here .......
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
- -steves-
- Administrator
- Posts: 2443
- Joined: Thu Jul 28, 2011 1:50 pm
- Location: Cambridge & Peterborough
Re: Mountaineer
Ok, I think I have gone too far now, these lines are 0.75mm wide, I agree, the design us a little long, I will know for next time.
The buck stops here .......
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Re: Mountaineer
That looks Ok to me Steve, but am I correct in thinking this would only really work for one-colour lining? I realise that in theory you could cut say, a white line and two matching outer black lines, but I can't imagine even trying to get them all lined up!
Philip
- -steves-
- Administrator
- Posts: 2443
- Joined: Thu Jul 28, 2011 1:50 pm
- Location: Cambridge & Peterborough
Re: Mountaineer
Yes and no. It's far easier to do single colour lines that's for sure. If you wanted say a red line next to a white line, you could CAD them up next to each other to ensure correct sizing, then separate them for printing, then put them on the same transfer tape (with very careful positioning) and put them on the model as one. That is one of the things my wife wants to try next.
If you wanted a gold line with a black line inside it, again, same theory, but just put the black line on a wider gold line and on the transfer tape. again, goes on the model as one.
The buck stops here .......
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
-
- Trainee Driver
- Posts: 978
- Joined: Fri Oct 05, 2018 6:30 pm
- Location: South West Wales
Re: Mountaineer
I have been looking at the photo with Little Wonder in the background - and wondered about your handrails. Then I looked again at the final photos of Mountaineer, again it was the handrails I noticed.
I printed the handrails on Welsh Pony on the resin printer - as one unit handrails and mounting knobs. They are so easily bent and damaged that I am looking for a better way of making the handrails.
So it looks like you are printing the knobs, and using rod for the handrail - which seems a better method.
I would like to know a bit more about exactly what you find works best.
Trevor
I printed the handrails on Welsh Pony on the resin printer - as one unit handrails and mounting knobs. They are so easily bent and damaged that I am looking for a better way of making the handrails.
So it looks like you are printing the knobs, and using rod for the handrail - which seems a better method.
I would like to know a bit more about exactly what you find works best.
Trevor
- -steves-
- Administrator
- Posts: 2443
- Joined: Thu Jul 28, 2011 1:50 pm
- Location: Cambridge & Peterborough
Re: Mountaineer
Yes I print the knobs and use a metal rod. The main thing is to make sure to use as larger "bit" as possible (the bit that goes from the knob into the body work). The larger that is, the less chance of it breaking, as I used to have the same issue with them breaking off where they went into the body work, they do seem significantly better now and I have not managed to break one as yet.Trevor Thompson wrote: ↑Mon Feb 28, 2022 9:45 am I have been looking at the photo with Little Wonder in the background - and wondered about your handrails. Then I looked again at the final photos of Mountaineer, again it was the handrails I noticed.
I printed the handrails on Welsh Pony on the resin printer - as one unit handrails and mounting knobs. They are so easily bent and damaged that I am looking for a better way of making the handrails.
So it looks like you are printing the knobs, and using rod for the handrail - which seems a better method.
I would like to know a bit more about exactly what you find works best.
Trevor
The buck stops here .......
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
Ditton Meadow Light Railway (DMLR)
Member of Peterborough and District Association
http://peterborough.16mm.org.uk/
-
- Trainee Driver
- Posts: 978
- Joined: Fri Oct 05, 2018 6:30 pm
- Location: South West Wales
Re: Mountaineer
Many thanks
I will try the same approach
Trevor
I will try the same approach
Trevor
Who is online
Users browsing this forum: No registered users and 5 guests