3D double diesel

A place where discussions are about 3D printing.
User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: 3D double diesel

Post by ge_rik » Tue Jun 23, 2020 5:09 pm

philipy wrote: ↑Mon Jun 22, 2020 10:03 am
ge_rik wrote: ↑Fri Jun 19, 2020 1:18 pm The two AA sized batteries and Deltang receiver/controller are in the control panel in the cab.
Rik,
Have you used actual AA's or are they Li-ion as you usually use?

I think you recommend Ecolux as a good battery supplier, but they do many brands, do you have a favourite brand, or just pick what seems good value from a trusted supplier?
Hi Philip
I used two 14500 (AA sized) li-ion cells wired in parallel to give (nominally) twice the run time. Yes, they are from Ecolux and yes I go for the best value in terms of capacity and price. I do try sticking with recognised brands (eg Sony, LG, Panasonic) but don't really have a favourite. I can vouch for the quality of Norb's cells unlike others which can be bought on eBay for less but are not as reliable or deliver what they claim (eg I once bought what were advertised on eBay as 3200ah cells which actually ran for less than half the time they should have done). Needless to say one of these cells failed in less than a year.

So far, I've had no fails on cells from Ecolux, and they deliver what's claimed in terms of capacity.

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
philipy
Moderator
Moderator
Posts: 5033
Joined: Sun Jan 30, 2011 3:00 pm
Location: South Northants

Re: 3D double diesel

Post by philipy » Tue Jun 23, 2020 5:34 pm

Thanks, thats roughly what I thought you'd say.
Philip

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: 3D double diesel

Post by FWLR » Thu Jun 25, 2020 10:09 am

Just read your post Rik, I'am sorry.
It amazes me how your skills develop to a level that is just brilliant in want you do and turn out such fantastic models, wether it be buildings or locos. I wish a had a modicum of your skills, then I would be in a truly superb world....
Last edited by FWLR on Sat Jun 27, 2020 7:11 am, edited 1 time in total.

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: 3D double diesel

Post by Andrew » Fri Jun 26, 2020 12:55 pm

FWLR wrote: ↑Thu Jun 25, 2020 10:09 am Just read your post Rik
Me too, don't know how I missed it!

What lovely locos, congratulations! Helpful info on design tools for 3D printing too - now that's something I should've got round to try out during peak lockdown!

Andrew.

User avatar
Old Man Aaron
Trainee Driver
Trainee Driver
Posts: 795
Joined: Wed Oct 19, 2016 11:08 am
Location: Sunshine Coast QLD, Australia

Re: 3D double diesel

Post by Old Man Aaron » Sat Jun 27, 2020 5:28 am

Love what you've done with that printer, Rik. Another nice addition to your fleet.
I quite like that they're back-to-back; We also had a pair of cane locos running around that way on the local Moreton cane tramways, till the mill closed in '03.
Regards,
Aaron - Scum Class Works

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: 3D double diesel

Post by ge_rik » Sat Jun 27, 2020 6:38 pm

Old Man Aaron wrote: ↑Sat Jun 27, 2020 5:28 am Love what you've done with that printer, Rik. Another nice addition to your fleet.
I quite like that they're back-to-back; We also had a pair of cane locos running around that way on the local Moreton cane tramways, till the mill closed in '03.
Those (and similar) inspired my decision to couple them back to back.
Good picture

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
Lonsdaler
Driver
Driver
Posts: 1226
Joined: Tue May 20, 2014 9:50 am
Location: North Yorkshire

Re: 3D double diesel

Post by Lonsdaler » Thu Jul 02, 2020 5:20 pm

A 'right rivettin' read' Rik, and 2 lovely locos. With the best will in the world, I don't seem to have enough hours in the day to drop in on the forum more regularly. But it's nice to be presented with threads like this one when I do. :thumbup:
Phil

Sporadic Garden Railer who's inconsistencies know no bounds

My Line - https://gardenrails.org/forum/viewtopic ... 41&t=11077

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: 3D double diesel

Post by ge_rik » Thu Jul 02, 2020 8:00 pm

Peter Butler wrote: ↑Sun Jun 21, 2020 12:16 am A huge 'love' for the background music.
I thought you might like it Peter. It was on the shortlist as background music for your B.U.R.P.S. video. I forgot I'd downloaded it until I was looking for some music to fit this video. It seemed to match the subject well.

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: 3D double diesel

Post by ge_rik » Thu Jul 02, 2020 8:01 pm

philipy wrote: ↑Sun Jun 21, 2020 8:13 am Rik,
I've just thought, you ought to post a "make" and link to this video on the Thingiverse page.
Not sure how to do that. I will investigate...

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
philipy
Moderator
Moderator
Posts: 5033
Joined: Sun Jan 30, 2011 3:00 pm
Location: South Northants

Re: 3D double diesel

Post by philipy » Fri Jul 03, 2020 6:14 am

ge_rik wrote: ↑Thu Jul 02, 2020 8:01 pm
Not sure how to do that. I will investigate...
I think all you need to do is go to the original Thingiverse file pages and click the "Post a make" link on the RHS to upload still pics. ( I guess you'd need to do it on both the original and 'Remake' pages?)

Screenshot 2020-07-03 06.06.23.png
Screenshot 2020-07-03 06.06.23.png (282.99 KiB) Viewed 6078 times

Not sure if it will let you upload the actual video but I think you can add the URL in the commenst section.
Philip

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: 3D double diesel

Post by ge_rik » Fri Jul 03, 2020 12:34 pm

Thanks Philip
Now done! But what a palaver! Tried logging in using my Google ID and went round in circles as it kept asking for the same info and the sending me back to the original page. I then tried registering normally and it kept throwing up a Recaptcha error message, even though there was no "I'm not a robot" button. In the end I had to fire up the laptop and register that way, except it demanded my age and wouldn't let me enter it manually and so I had to click through 69 X 12 separate months to reach the year and month of my birth!

Then it wouldn't accept the video file, so I've uploaded some stills.

Phew!!!

Rik
Last edited by ge_rik on Sat Jul 04, 2020 7:37 am, edited 1 time in total.
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: 3D double diesel

Post by FWLR » Sat Jul 04, 2020 7:14 am

Think I would have given up myself Rik. Those Recaptcha "I am not a Robot" on a lot of sites are a real pain in you know where.

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: 3D double diesel

Post by ge_rik » Tue May 24, 2022 9:54 am

A bit of an update on this build (from two years ago). I've finally gotten around to creating a blog post about it
https://riksrailway.blogspot.com/2022/0 ... locos.html

Since my last update on this thread, I have motorised the trailing loco so they now work as a permanently coupled pair. One has the recommended IP Engineering Budget chassis but the second loco uses the chassis included with the kit to which I added brass bushes, wheels, gears and a motor from IP Engineering. They both seem to operate equally well. They will now quite happily pull eight loaded skips, plus gunpowder van and brake van up my 1:40 gradients.
IMG_1846.JPG
IMG_1846.JPG (432.39 KiB) Viewed 3942 times
Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests