The Ringbalin "Cane Line"

A place for the discussion of garden railways and any garden style/scale portable and/or indoor layouts
User avatar
Old Man Aaron
Trainee Driver
Trainee Driver
Posts: 793
Joined: Wed Oct 19, 2016 11:08 am
Location: Sunshine Coast QLD, Australia

Re: The Ringbalin "Cane Line"

Post by Old Man Aaron » Mon Oct 04, 2021 12:45 am

Coming together well. :thumbleft:
Regards,
Aaron - Scum Class Works

User avatar
GAP
Trainee Driver
Trainee Driver
Posts: 684
Joined: Sun Dec 23, 2012 10:34 pm
Location: Bundaberg QLD Australia
Contact:

Re: The Ringbalin "Cane Line"

Post by GAP » Mon Oct 04, 2021 4:09 am

Bit more work this morning, the cable tray forming the "farm" loop has been installed.
Mill end tray installed.JPG
Mill end tray installed.JPG (92.22 KiB) Viewed 3253 times
Mill end tray installed 1.JPG
Mill end tray installed 1.JPG (92.2 KiB) Viewed 3253 times
Mill end tray close up.JPG
Mill end tray close up.JPG (92.31 KiB) Viewed 3253 times
Graeme
From the home of the Ringbalin Light Railway
https://ringbalin-light-railway.blogspo ... -page.html

User avatar
GAP
Trainee Driver
Trainee Driver
Posts: 684
Joined: Sun Dec 23, 2012 10:34 pm
Location: Bundaberg QLD Australia
Contact:

Re: The Ringbalin "Cane Line"

Post by GAP » Sat Oct 09, 2021 9:59 pm

The cable tray has now been laid and the cut ends primed (2 coats).
Next up is to lay the weed mat the will stop the ballast from falling through the holes but allow water to pass. I'll give the whole thing a light spray with some grey primer first.
Then it will be onto laying the track, I am using AMS code 250 track and the sleeper mounts are very dubious as they have deteriorated in the sun.
The sleepers will be held in place by cable ties through the mat and looped around the tray.
I will have to spray paint the sleepers to protect them from further damage.
I am using "Split Jaw" rail clamps with a few slide on joiners to allow for movement due to temp fluctuations.
Cane Line loop finished.JPG
Cane Line loop finished.JPG (93.08 KiB) Viewed 3189 times
Cane Line loop finished 1.JPG
Cane Line loop finished 1.JPG (92.87 KiB) Viewed 3189 times
Cane Line mill run finished.JPG
Cane Line mill run finished.JPG (91.36 KiB) Viewed 3189 times
Graeme
From the home of the Ringbalin Light Railway
https://ringbalin-light-railway.blogspo ... -page.html

User avatar
ge_rik
Administrator
Administrator
Posts: 6477
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: The Ringbalin "Cane Line"

Post by ge_rik » Mon Oct 11, 2021 10:56 am

Wow! That's some extension! The head of (galvanised) steel is continuing to advance :lol:

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
GAP
Trainee Driver
Trainee Driver
Posts: 684
Joined: Sun Dec 23, 2012 10:34 pm
Location: Bundaberg QLD Australia
Contact:

Re: The Ringbalin "Cane Line"

Post by GAP » Mon Oct 11, 2021 9:52 pm

ge_rik wrote: Mon Oct 11, 2021 10:56 am Wow! That's some extension! The head of (galvanised) steel is continuing to advance :lol:

Rik
All this is because I built a sugar mill then found I had no room to put it on the existing layout, my solution build another layout with the mill as the centrepiece.
Any thing to add a bit more trackage, actually I had the track (Code 250) but did not how to integrate it into the existing layout (Code 332).
Graeme
From the home of the Ringbalin Light Railway
https://ringbalin-light-railway.blogspo ... -page.html

Trevor Thompson
Trainee Driver
Trainee Driver
Posts: 963
Joined: Fri Oct 05, 2018 6:30 pm
Location: South West Wales

Re: The Ringbalin "Cane Line"

Post by Trevor Thompson » Tue Oct 12, 2021 10:45 am

An interesting way of making raised trackbed. At least it is immune to wood boring creatures!

In fact I am amazed that no one else has thought of using cable tray like this - or at least I haven't come across it before.

Trevor

User avatar
GAP
Trainee Driver
Trainee Driver
Posts: 684
Joined: Sun Dec 23, 2012 10:34 pm
Location: Bundaberg QLD Australia
Contact:

Re: The Ringbalin "Cane Line"

Post by GAP » Tue Oct 12, 2021 9:56 pm

Trevor Thompson wrote: Tue Oct 12, 2021 10:45 am An interesting way of making raised trackbed. At least it is immune to wood boring creatures!

In fact I am amazed that no one else has thought of using cable tray like this - or at least I haven't come across it before.

Trevor
A bloke in the UK used cable tray for his railway but he turned it the opposite way.
Railway is called "The Orchard Line"
407614_20210122_170045.jpg
407614_20210122_170045.jpg (192.24 KiB) Viewed 2563 times
Graeme
From the home of the Ringbalin Light Railway
https://ringbalin-light-railway.blogspo ... -page.html

Trevor Thompson
Trainee Driver
Trainee Driver
Posts: 963
Joined: Fri Oct 05, 2018 6:30 pm
Location: South West Wales

Re: The Ringbalin "Cane Line"

Post by Trevor Thompson » Wed Oct 13, 2021 9:26 am

GAP wrote: Tue Oct 12, 2021 9:56 pm
Trevor Thompson wrote: Tue Oct 12, 2021 10:45 am An interesting way of making raised trackbed. At least it is immune to wood boring creatures!

In fact I am amazed that no one else has thought of using cable tray like this - or at least I haven't come across it before.

Trevor
A bloke in the UK used cable tray for his railway but he turned it the opposite way.
Railway is called "The Orchard Line"
407614_20210122_170045.jpg
I will look for that!

Trevor

User avatar
GAP
Trainee Driver
Trainee Driver
Posts: 684
Joined: Sun Dec 23, 2012 10:34 pm
Location: Bundaberg QLD Australia
Contact:

Re: The Ringbalin "Cane Line"

Post by GAP » Wed Oct 27, 2021 9:22 pm

While ignoring the 3D printer in the naughty corner I worked on the cane line, track has been laid and tested.
At the end of the "Farms" loop an LGB R1 point with loose blades has been installed, at the "Mill" loop end an Aristocraft point that has lost its throw mechanism will be used.
Points Mill Loop.JPG
Points Mill Loop.JPG (92.46 KiB) Viewed 2418 times
Testing revealed that the locos that run on this line will push through the R1 points and set them with no issue, testing for the Aristcraft will follow. This configuration forces the trains to go around the loops in one direction on the first run and in the opposite direction on the second run.
Points Farm Loop.JPG
Points Farm Loop.JPG (90.09 KiB) Viewed 2418 times
The track has been laid on shade cloth which will allow water drainage and prevent the ballast from falling through the holes in the cable tray.
Track on Tray.JPG
Track on Tray.JPG (90.5 KiB) Viewed 2418 times
Farms loop w-track.JPG
Farms loop w-track.JPG (91.6 KiB) Viewed 2418 times
Mill Run w-track.JPG
Mill Run w-track.JPG (89.63 KiB) Viewed 2418 times
Work will continue on the Mill Loop once this has stopped producing tomatoes (one plant that grew out of the compost put under the mill area support). In the picture above the passionfruit vine from next door has taken over the upper loop, my biggest problem seems to be keeping the garden out of the garden railway.
P1060521.JPG
P1060521.JPG (83.65 KiB) Viewed 2418 times
Graeme
From the home of the Ringbalin Light Railway
https://ringbalin-light-railway.blogspo ... -page.html

11thHour
Trainee Fireman
Trainee Fireman
Posts: 116
Joined: Mon Mar 26, 2012 4:00 am
Location: Wodonga, Vic. Land of Oz

Re: The Ringbalin "Cane Line"

Post by 11thHour » Thu Oct 28, 2021 2:44 am

I used mesh cable tray for the non scenic side of the layout
The sides of the tray help in derailments😁
The lighter framework is arguably less intrusive
Attachments
24A37ABE-1BEE-4F72-AA83-F15096159412.jpeg
24A37ABE-1BEE-4F72-AA83-F15096159412.jpeg (3.36 MiB) Viewed 2400 times

User avatar
GAP
Trainee Driver
Trainee Driver
Posts: 684
Joined: Sun Dec 23, 2012 10:34 pm
Location: Bundaberg QLD Australia
Contact:

Re: The Ringbalin "Cane Line"

Post by GAP » Thu Dec 23, 2021 10:29 pm

I have finally updated my Blog to show the state of the layout at this point in time.

https://ringbalin-light-railway.blogspo ... -page.html
Graeme
From the home of the Ringbalin Light Railway
https://ringbalin-light-railway.blogspo ... -page.html

User avatar
Old Man Aaron
Trainee Driver
Trainee Driver
Posts: 793
Joined: Wed Oct 19, 2016 11:08 am
Location: Sunshine Coast QLD, Australia

Re: The Ringbalin "Cane Line"

Post by Old Man Aaron » Fri Dec 24, 2021 4:28 am

Good stuff! Love the turf and ballast, hope they work out longer-term, they really finish the appearance.
Regards,
Aaron - Scum Class Works

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest