My circular layout
My circular layout
Hi I have started the groundwork to my first garden layout. The layout will be a 5ft radius circular layout. I’m planning on using MSS track without any points which should be ideal for a couple of my clockwork locomotives and my Millie.
The layout will be 2ft high with a tree growing through the middle of the layout and shrubbery around the edges of the layout.
The posts will be concreted in and weather treated boards will be fitted around the edges.
The layout will be 2ft high with a tree growing through the middle of the layout and shrubbery around the edges of the layout.
The posts will be concreted in and weather treated boards will be fitted around the edges.
Re: My circular layout
Sounds like a promising start. Also looks like there also might be room for future expansion
Rik
Rik
Re: My circular layout
I was thinking the same. It's a good plan not to start with something too ambitious.
Ian
Re: My circular layout
Hi Ian thanks. I was thinking the same, I’m not to sure about using concreting posts in the winter and is it possible in the winter.
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Re: My circular layout
Having any size railway is better than no railway at all.
At least you will finish it!
At least you will finish it!
Re: My circular layout
Thanks tom_tom_go I’m in unknown territory but I’m certain a small bit of progress each time I will conquer my layout build.tom_tom_go wrote: ↑Wed Jan 02, 2019 1:29 pm Having any size railway is better than no railway at all.
At least you will finish it!
Re: My circular layout
This morning I managed to get my posts concreted while it’s mild outside, also soil has been spread over the top of the concrete to protect it. Battons have been fixed in place for extra strength and support. Once all set treated boards will be fitted around the edges and on the top for the track bed. Picture of my progress.
- Peter Butler
- Driver
- Posts: 5244
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: My circular layout
Very tidy work there.... it looks as though you have used 3 x 2 studding which is probably not treated against rot. Have you used preservative where the wood is in the ground?
The best things in life are free.... so why am I doing this?
Re: My circular layout
Hi Peter yes I have used 3x2 studding which has been treated at my local timber merchants. I know the wood does look light in the photo but all timber is bought treated.Peter Butler wrote: ↑Fri Jan 04, 2019 3:36 pm Very tidy work there.... it looks as though you have used 3 x 2 studding which is probably not treated against rot. Have you used preservative where the wood is in the ground?
Who is online
Users browsing this forum: No registered users and 16 guests