The Potters Orchid Railway
- Hydrostatic Dazza
- Driver
- Posts: 1167
- Joined: Tue Sep 19, 2017 4:17 am
- Location: Brisbane
- Contact:
Re: The Potters Orchid Railway
HELP Any one out there that knows a good source for Peco SM32 track in Australia ?
£79.40 postage for one Left hand medium radius SM32 turnout # SLE696 of £35.42 cost is a bit silly, I can send 500 grams in a satchel from OZ to the UK for $26.00 (£16.00)
I need one more LH medium turnout and later I may need some more flex track.
£79.40 postage for one Left hand medium radius SM32 turnout # SLE696 of £35.42 cost is a bit silly, I can send 500 grams in a satchel from OZ to the UK for $26.00 (£16.00)
I need one more LH medium turnout and later I may need some more flex track.
Cheers from Dazza, The Hydrostatic Lubricator
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
Re: The Potters Orchid Railway
I haven't done a hobby shop crawl in Brisbane for many years. Shops come and go and move around, but I know there are still several model railway shops in the Brisbane area.Hydrostatic Dazza wrote: ↑Tue Oct 17, 2017 12:14 am HELP Any one out there that knows a good source for Peco SM32 track in Australia ?
45mm gauge is more common in Aust and while a shop may not stock SM32 track, it is available here, so they can get it in to order and I think one of Peco's Aust. distributors is in Brisbane.
Otherwise, the AMRA Queensland Branch have a garden scale group who will know the best sources locally. Their clubrooms and track are in Zillmere, backing on to the railway line near the station. http://amra.asn.au/queensland/
Graeme
Re: The Potters Orchid Railway
Very impressive groundworks - great to see some good engineering being used - puts me to shame!
Where did I put that uncoupler?
Re: The Potters Orchid Railway
Just been catching up with this thread and I must say your trackbed is very well engineered. I like the way you used threaded rods in plastic tubing as spacers for the shuttering - presumably, you could now thread cables through the tubes if you want lighting etc around the railway.
As others have said, your workshop not only looks well stocked, it looks very well organised - certainly beats my converted dressing-table workbench in the corner of the conservatory ......
Looking forward to developments as the line progresses.
Rik
As others have said, your workshop not only looks well stocked, it looks very well organised - certainly beats my converted dressing-table workbench in the corner of the conservatory ......
Looking forward to developments as the line progresses.
Rik
- Hydrostatic Dazza
- Driver
- Posts: 1167
- Joined: Tue Sep 19, 2017 4:17 am
- Location: Brisbane
- Contact:
Re: The Potters Orchid Railway
Thanks Rik. The track bed construction was inspired by an article in Australian Model Engineer magazine. I will not always be a dedicated garden railway tragic due to be involved tragically with full size heritage railways and I must sate my model engineering urges. The plastic spacers/drainage tubes are so rain events like the current one have a hope of draining away. 300mm in a few days recently, after a very dry and hot winter. Using the drains for conduit for lights is a good idea, thanks for that. That is what the plastic was to start with, electrical conduit :-) I lived in a hovel for many years and my bike making workshop has been temporary for nearly 20 years , met MAM 10 years ago and we got entangled, (we both have no children) so when we pressed the go button for the extension in 2012 and with the rebuild I wanted a nice room to escape and enjoy, and with skylights and a girder trolley over head that goes out into the car port along side the house. I rather this than a new car because cars are buckets of nuts and bolts that just deteriorate. (unless your restore old cars and then it is fun) We use S/H but good cars. Many visitors comment on the workshop and they imagine and comment on the cost, which irritates me because they do not think it out, their life etc, however my reply is that it cost less then your new $50,000 car and I get to have a lifetime of enjoyment in there. I also can claim it all on my business, which is a win. The rain should ease today so tonight I finish leveling the form work tonight on the second loop and we pour tomorrow if all goes well.ge_rik wrote: ↑Tue Oct 17, 2017 4:56 pm Just been catching up with this thread and I must say your trackbed is very well engineered. I like the way you used threaded rods in plastic tubing as spacers for the shuttering - presumably, you could now thread cables through the tubes if you want lighting etc around the railway.
As others have said, your workshop not only looks well stocked, it looks very well organised - certainly beats my converted dressing-table workbench in the corner of the conservatory ......
Looking forward to developments as the line progresses.
Rik
Last edited by Hydrostatic Dazza on Sat Oct 21, 2017 8:51 pm, edited 1 time in total.
Cheers from Dazza, The Hydrostatic Lubricator
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
- Hydrostatic Dazza
- Driver
- Posts: 1167
- Joined: Tue Sep 19, 2017 4:17 am
- Location: Brisbane
- Contact:
Re: The Potters Orchid Railway
Thanks Graeme, Zillmere is just 20 mins away but I am reluctant to join another club, I am full steam with a couple of heritage railways and full up, however I need to establish a nice source, personal business near by to get some odds and ends. I brought back most of my point work last year from the UK and I shipped 35m of track this year, but I discover I am short one point.GTB wrote: ↑Tue Oct 17, 2017 8:07 amI haven't done a hobby shop crawl in Brisbane for many years. Shops come and go and move around, but I know there are still several model railway shops in the Brisbane area.Hydrostatic Dazza wrote: ↑Tue Oct 17, 2017 12:14 am HELP Any one out there that knows a good source for Peco SM32 track in Australia ?
45mm gauge is more common in Aust and while a shop may not stock SM32 track, it is available here, so they can get it in to order and I think one of Peco's Aust. distributors is in Brisbane.
Otherwise, the AMRA Queensland Branch have a garden scale group who will know the best sources locally. Their clubrooms and track are in Zillmere, backing on to the railway line near the station. http://amra.asn.au/queensland/
Graeme
Cheers from Dazza, The Hydrostatic Lubricator
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
Re: The Potters Orchid Railway
I wasn't necessarily suggesting you join AMRA, but the Vic. Branch has open days and I'd guess so does the Qld. branch.Hydrostatic Dazza wrote: ↑Wed Oct 18, 2017 11:19 pm however I need to establish a nice source, personal business near by to get some odds and ends.
If you are north of the city, then Horizon Hobbies at Warner and Hobbyrama at Stafford would be worth a call......
The other model railway shops I remember were further south, Austral Modelcraft at Mt. Gravatt East and HobbyOne at McGregor.
The Peco distributor is on the Gold Coast, so it shouldn't take long for any Brisbane shop to get Peco orders delivered.
Graeme
- Hydrostatic Dazza
- Driver
- Posts: 1167
- Joined: Tue Sep 19, 2017 4:17 am
- Location: Brisbane
- Contact:
Re: The Potters Orchid Railway
Rain and rain and yet more rain has conspired to delay the pour of the second loop. It is tight, R= 800mm but that is all I could fit in. If all goes well, MAM and I mix and pour tonight after work.
Cheers from Dazza, The Hydrostatic Lubricator
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
- Hydrostatic Dazza
- Driver
- Posts: 1167
- Joined: Tue Sep 19, 2017 4:17 am
- Location: Brisbane
- Contact:
Re: The Potters Orchid Railway
Thanks for this, much appreciated, I will follow up. CheersGTB wrote: ↑Thu Oct 19, 2017 11:53 amI wasn't necessarily suggesting you join AMRA, but the Vic. Branch has open days and I'd guess so does the Qld. branch.Hydrostatic Dazza wrote: ↑Wed Oct 18, 2017 11:19 pm however I need to establish a nice source, personal business near by to get some odds and ends.
If you are north of the city, then Horizon Hobbies at Warner and Hobbyrama at Stafford would be worth a call......
The other model railway shops I remember were further south, Austral Modelcraft at Mt. Gravatt East and HobbyOne at McGregor.
The Peco distributor is on the Gold Coast, so it shouldn't take long for any Brisbane shop to get Peco orders delivered.
Graeme
Cheers from Dazza, The Hydrostatic Lubricator
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
- Hydrostatic Dazza
- Driver
- Posts: 1167
- Joined: Tue Sep 19, 2017 4:17 am
- Location: Brisbane
- Contact:
Re: The Potters Orchid Railway
There was a break in the rain (been wet for two weeks!) The usual crew has already knocked off on this Friday arvo so it was up to MAM and Me.
My firing shovel has not seen some use for a while, what better use to keep it familiar with railways
the screeder in action
I will be pleased when the back yard does not look like a building site
Done
Rain is back this Saturday morning. Must be the Welsh influences this railway creation is stirring up in the skies!
any how
there is to be a bridge in there, a 750mm under arch MVL is my desire
My firing shovel has not seen some use for a while, what better use to keep it familiar with railways
the screeder in action
I will be pleased when the back yard does not look like a building site
Done
Rain is back this Saturday morning. Must be the Welsh influences this railway creation is stirring up in the skies!
any how
there is to be a bridge in there, a 750mm under arch MVL is my desire
Cheers from Dazza, The Hydrostatic Lubricator
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
- Peter Butler
- Driver
- Posts: 5219
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: The Potters Orchid Railway
ground-works look very impressive and well worth the effort despite the disruption the garden. You obviously have a plan in mind and before long it will start to show.
The best things in life are free.... so why am I doing this?
- Hydrostatic Dazza
- Driver
- Posts: 1167
- Joined: Tue Sep 19, 2017 4:17 am
- Location: Brisbane
- Contact:
Re: The Potters Orchid Railway
Peter, I have a sort of a plan of the hills to be terra formed into place eventually, so the track has a reason to wind its way around, over embankments and a gorge and through cuttings and I suppose I will put the ubiquitous tunnel in there, most likely tunnels and cuttings to break the loops up, especially the 800mm radius one we laid last night. I never wanted a ground level track, but on terrace just at hip height so one can sit and look at and along it. The details will come later, right now it is get a the base down, then lay some track and we don't even have any rolling stock but for loco frame to roll over it. It is to the Red Room now as the rain constant. If this keeps up we will moss every where and waist high weeds again. .Peter Butler wrote: ↑Sat Oct 21, 2017 12:12 am ground-works look very impressive and well worth the effort despite the disruption the garden. You obviously have a plan in mind and before long it will start to show.
Cheers from Dazza, The Hydrostatic Lubricator
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
- Peter Butler
- Driver
- Posts: 5219
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: The Potters Orchid Railway
I can see a tunnel would help to disguise the loop on your line but I made a point of not building one myself simply because I occasionally run my Emetts which are a larger scale (about 1:12) and are much taller than any 16mm stock.
They would soon be free of useless attachments such as chimneys etc.......The best things in life are free.... so why am I doing this?
- Hydrostatic Dazza
- Driver
- Posts: 1167
- Joined: Tue Sep 19, 2017 4:17 am
- Location: Brisbane
- Contact:
Re: The Potters Orchid Railway
I like the idea of Emetts running on my line to aid the entertainment value for visitors
even a blue tank engine for the little tackers
Me thinking
pause
MAM wants a tunnel, she wants to make the portals in clay and fire them in her kiln
Some pondering to be done later as the rain has stopped and I am out in rubber boots to tackle the form work for the bridge abutments today
even a blue tank engine for the little tackers
Me thinking
pause
MAM wants a tunnel, she wants to make the portals in clay and fire them in her kiln
Some pondering to be done later as the rain has stopped and I am out in rubber boots to tackle the form work for the bridge abutments today
Cheers from Dazza, The Hydrostatic Lubricator
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
- Hydrostatic Dazza
- Driver
- Posts: 1167
- Joined: Tue Sep 19, 2017 4:17 am
- Location: Brisbane
- Contact:
Re: The Potters Orchid Railway
Steady rain all day Saturday so it was Red Room action.
Sunday, bright sunshine and hot, so the civil engineering gang swung into action from 6.00am till 7.30pm.
The connection of Potters Junction to the Orchid house loop has to snarl its way around steep mountains and rocky outcrops and a significant gorge to cross that would give the Kuranda railway a fright. (OK, the mountains and rocky out crops are to come)
The string line was to help set the bridge form work as the LASER is not much help in full sunshine, until late arvo and evening. The gang lined the bridge up and then the form work was connected to this, just like the full size bridge builders do. If all goes to plan the bridge will be a 750mm MVL under arch, however delivery time is unknown, so the timber temporary bridge (decent lump of Boxwood my neighbour had to hand) will stay in place when the track bed ply form is removed.
I have noticed with the rain the levels are moving 2-5mm in places. This could be the floating slab that the Pottery shed is on (where I have my road bed mark on) and or the terrace is moving up and down with the moisture seeping in from the higher level which is the house level. Not a problem, but interesting and currently there is 5mm variation along the route. The block walls are on concrete footings. Tonight is fill in the forms before the pour , we might pour tonight. Tomorrow I have to attend a board meeting of the Australian Railway Historical Society Queensland Division.
Sunday, bright sunshine and hot, so the civil engineering gang swung into action from 6.00am till 7.30pm.
The connection of Potters Junction to the Orchid house loop has to snarl its way around steep mountains and rocky outcrops and a significant gorge to cross that would give the Kuranda railway a fright. (OK, the mountains and rocky out crops are to come)
The string line was to help set the bridge form work as the LASER is not much help in full sunshine, until late arvo and evening. The gang lined the bridge up and then the form work was connected to this, just like the full size bridge builders do. If all goes to plan the bridge will be a 750mm MVL under arch, however delivery time is unknown, so the timber temporary bridge (decent lump of Boxwood my neighbour had to hand) will stay in place when the track bed ply form is removed.
I have noticed with the rain the levels are moving 2-5mm in places. This could be the floating slab that the Pottery shed is on (where I have my road bed mark on) and or the terrace is moving up and down with the moisture seeping in from the higher level which is the house level. Not a problem, but interesting and currently there is 5mm variation along the route. The block walls are on concrete footings. Tonight is fill in the forms before the pour , we might pour tonight. Tomorrow I have to attend a board meeting of the Australian Railway Historical Society Queensland Division.
Last edited by Hydrostatic Dazza on Tue May 19, 2020 10:43 pm, edited 1 time in total.
Cheers from Dazza, The Hydrostatic Lubricator
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
- Peter Butler
- Driver
- Posts: 5219
- Joined: Sun Sep 09, 2012 10:33 pm
- Location: West Wales
Re: The Potters Orchid Railway
I love the meandering line though your landscape. You have every right to look satisfied with your handiwork.
The best things in life are free.... so why am I doing this?
- Soar Valley Light
- Driver
- Posts: 1451
- Joined: Sun Dec 08, 2013 5:18 pm
- Location: North West Leicestershire
Re: The Potters Orchid Railway
This is a very well engineered railway Dazza, I'm impressed! Careful setting out and careful construction will pay you back in spades, all the time spent getting it right will bring big rewards in reliability and a realistic appearance unobtainable by any other means.
I know what you mean about lasers. My laser level is a dirt cheap (£20) model intended for internal construction work. It's about as much use outside as an ashtray on a motorbike even on a dull English day. All the level surveying and setting out for my line was done on nights!
Please keep the updates coming, it's great seeing your line growing. I'm really looking forward to seeing some track going down (not as much as you are, I'm sure!)
Andrew
I know what you mean about lasers. My laser level is a dirt cheap (£20) model intended for internal construction work. It's about as much use outside as an ashtray on a motorbike even on a dull English day. All the level surveying and setting out for my line was done on nights!
Please keep the updates coming, it's great seeing your line growing. I'm really looking forward to seeing some track going down (not as much as you are, I'm sure!)
Andrew
"Smith! Why do you only come to work four days a week?
"'cause I can't manage on three gaffer!"
"'cause I can't manage on three gaffer!"
- Hydrostatic Dazza
- Driver
- Posts: 1167
- Joined: Tue Sep 19, 2017 4:17 am
- Location: Brisbane
- Contact:
Re: The Potters Orchid Railway
Thanks. I very much want the impression that it is a narrow gauge railway that was forced to negotiate its way around the rugged terrain to get to the other end. As a young lad I was very much impressed with John Allen's "Gorre and Daphetid" with its detail and floor to ceiling mountains, this will be smaller but hopefully live steam.Peter Butler wrote: ↑Mon Oct 23, 2017 10:34 am I love the meandering line though your landscape. You have every right to look satisfied with your handiwork.
https://www.youtube.com/watch?v=j0tHHK-LI6Y
I am not sure I will ever apply as much scenery and modeling detail as you do Peter, not because of lack of my desire to do so, but due to demands of my other projects, such as my need to keep my model engineering projects rolling (I am a metal worker at heart) and also my full size steam involvement. I also have this problem of needing to earn an income being self employed and that gets in the way of life and projects I have been looking at your thread and MAM and I are considering the drip irrigation system from our rainwater tanks which are on the higher level so there will be a good head of water to feed it. It is all falling into place.
Cheers from Dazza, The Hydrostatic Lubricator
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
- Hydrostatic Dazza
- Driver
- Posts: 1167
- Joined: Tue Sep 19, 2017 4:17 am
- Location: Brisbane
- Contact:
Re: The Potters Orchid Railway
Thanks Andrew. If all goes well one day I will get back to the UK again soon and I will fly with my loco and we will have to visit a few railways for a steam up and a few alesSoar Valley Light wrote: ↑Mon Oct 23, 2017 6:00 pm This is a very well engineered railway Dazza, I'm impressed! Careful setting out and careful construction will pay you back in spades, all the time spent getting it right will bring big rewards in reliability and a realistic appearance unobtainable by any other means.
I know what you mean about lasers. My laser level is a dirt cheap (£20) model intended for internal construction work. It's about as much use outside as an ashtray on a motorbike even on a dull English day. All the level surveying and setting out for my line was done on nights!
Please keep the updates coming, it's great seeing your line growing. I'm really looking forward to seeing some track going down (not as much as you are, I'm sure!)
Andrew
Cheers from Dazza, The Hydrostatic Lubricator
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
- Hydrostatic Dazza
- Driver
- Posts: 1167
- Joined: Tue Sep 19, 2017 4:17 am
- Location: Brisbane
- Contact:
Re: The Potters Orchid Railway
The last sections are ready, the levels checked, 5mm of total up and down, a wee tiny amount of super elevation on the bends, the 6mm galv tie rod is in place and the gaps filled and lightly tamped, the concrete bed is leveled, the bricks are for soil support till the later terra forming takes place, the final pour if the rain holds off will be Wednesday evening because I am attending a board meeting tonight , sigh! (Historical Railway stuff)
The bridge abutments. I would have liked to have the 750mm MVL under arch bridge to hand to ensure all is sweet, but I suspect I will have to do add, or modify when the bridge arrives.
The bridge abutments. I would have liked to have the 750mm MVL under arch bridge to hand to ensure all is sweet, but I suspect I will have to do add, or modify when the bridge arrives.
Cheers from Dazza, The Hydrostatic Lubricator
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
The chances of finding out what’s really going on in the universe are so remote, the only thing to do is hang the sense of it and keep yourself occupied. Douglas Adams
Who is online
Users browsing this forum: No registered users and 2 guests