Page 1 of 14

The Cockatoo Creek Tramway

Posted: Thu Oct 05, 2017 9:33 am
by Mitch stack
Hello all i'm Mitch and i'm Building a Garden Railway in 16mm scale 45mm gauge track in Melbourne Australia. i have 1 loco which is a Mamod/MSS 0-4-0 side tank 45MM gauge Tablet fired i am Building my line in a L shape in 11.5 meters by 5 meters. here is the Track plan of the line i hope to achieve the Picture of the Loco is the only one i have on my laptop i will Edit this on my phone.
the EGCT V1.jpg
the EGCT V1.jpg (28.01 KiB) Viewed 15479 times
download.jpg
download.jpg (8.09 KiB) Viewed 15479 times
Hope you enjoyed the Post. Mitch

Re: The Emerald and Gembrook Creek Tramway in 16mm

Posted: Thu Oct 05, 2017 10:38 am
by tom_tom_go
Hi Mitch and welcome to the forum.

The track plan looks impressive, looking forward to further updates and photos.

Tom

Re: The Emerald and Gembrook Creek Tramway in 16mm

Posted: Thu Oct 05, 2017 11:13 am
by Mitch stack
thanks Tom i"m a friend of Ronan Cool train on the Forums i"d like most of the Line done by Christmas but it depends How Time Goes. Mitch.

Re: The Emerald and Gembrook Creek Tramway in 16mm

Posted: Thu Oct 05, 2017 6:13 pm
by dizzysteamer
I like the fact that your planning on a couple of passing places within your railway we could do with at least one more ourselves don't be surprised if it grows from your drawing :D Ours did very quickly lol.
Good luck on your PW work take your time and enjoy :D
regards
Steph and Gloria from the PSLR

Re: The Emerald and Gembrook Creek Tramway in 16mm

Posted: Thu Oct 05, 2017 9:12 pm
by bazzer42
Welcome Mitch.

Nice to watch a railway grow from scratch, good luck and lots of photos please.

Re: The Emerald and Gembrook Creek Tramway in 16mm

Posted: Thu Oct 05, 2017 9:58 pm
by invicta280
Hi Mitch. Is your line level?

Re: The Emerald and Gembrook Creek Tramway in 16mm

Posted: Thu Oct 05, 2017 10:25 pm
by Mitch stack
Thanks All for the Lovely Comments. Really Appreciate it yes the line will be level when built and hoping to have Radio controlled Live steamers like a Lady Anne or a Sammie the Mamod will remain manual control for the Time being. :) Will Post Some More when i get out side more and some track. Mitch

Re: The Emerald and Gembrook Creek Tramway in 16mm

Posted: Fri Oct 06, 2017 7:40 am
by ge_rik
Welcome aboard, Mitch. Looking forward to seeing how the line develops. Looks like an interesting track plan.

Rik

Re: The Emerald and Gembrook Creek Tramway in 16mm

Posted: Fri Oct 06, 2017 8:49 am
by Mitch stack
Thanks Rik I the put 2 passing loops in so
I can run live steam locos and multiple trains my main focus is getting the line started and finished before Christmas and scratch building some buildings. Mitch

Re: The Emerald and Gembrook Creek Tramway in 16mm

Posted: Sat Oct 07, 2017 6:12 am
by FWLR
Welcome Mitch, love the track plan, hope to see more updates. :thumbright:

Re: The Emerald and Gembrook Creek Tramway in 16mm

Posted: Sun Oct 22, 2017 6:17 am
by Mitch stack
Hi All Been a while since i last posted not much progress on the line because it has been raining a bit but the loco has been steamed quite a few times since i last posted.
Mitch

Re: The Emerald and Gembrook Creek Tramway in 16mm

Posted: Sun Oct 22, 2017 5:36 pm
by River Lin
Looks a lovely line to have visiting locos with its passing places.
David

Re: The Emerald and Gembrook Creek Tramway in 16mm

Posted: Tue Oct 24, 2017 10:21 am
by Mitch stack
Thanks David. i chose that Particular area because of No trees and a 1 in 16 gradient that im going to level out to a 1 in 30.

Re: The Emerald and Gembrook Creek Tramway in 16mm

Posted: Tue Nov 28, 2017 1:22 am
by Mitch stack
EGCT V3.jpg
EGCT V3.jpg (161.34 KiB) Viewed 15013 times
Hi guys Sorry for no posts for a while ive finally decided on a track plan for the line its a basic station with a passing loop on the other side and a Steam up area
hope you guys enjoy the post. Mitch.

Re: The Emerald and Gembrook Creek Tramway in 16mm

Posted: Tue Nov 28, 2017 7:13 am
by tom_tom_go
Quite a drastic change from the original plan, how comes?

Re: The Emerald and Gembrook Creek Tramway in 16mm

Posted: Tue Nov 28, 2017 7:43 am
by FWLR
I liked the 1st plan too. :thumbright:

Re: The Emerald and Gembrook Creek Tramway in 16mm

Posted: Tue Nov 28, 2017 8:19 am
by Mitch stack
Hi Folks. the reason why i changed the plan is because of money. i can only afford so much for my line and the final plan is it will end up as a L shape as mentoned earlier.
Mitch.

Re: The Emerald and Gembrook Creek Tramway in 16mm

Posted: Tue Nov 28, 2017 8:34 am
by FWLR
We all have a bit less money Mitch, well most of us anyway lol. I can see now how it will end up L shaped, take your time and expand when you can. :thumbright:

I myself have had a suggestion to run double track, for which i will when i can save some money, it won’t cost has much hopefully because most of it has been done with my two passing loops. :thumbright:

Re: The Emerald and Gembrook Creek Tramway in 16mm

Posted: Tue Nov 28, 2017 10:58 am
by Mitch stack
Thanks for the suggestion. ill consider it. :)

Mitch.

Re: The Emerald and Gembrook Creek Tramway in 16mm

Posted: Sat Dec 02, 2017 9:10 am
by Mitch stack
Hi folks. i have a minor update regarding the track instead of using the peco track i am going to use LGB track simply because its cheaper over here in Australia then getting the peco track shipped over here to Australia from dream steam.
i have ordered some IP engineering ezee kits to get a small train going for my MSS/Mamod loco i own, a Garden rail magazine subscription for 12 months and a association of 16mm ngm membership for Christmas. i have been given some track of a friends old garden railway i will hopefully collect before Christmas and have fun laying a L shape if i have enough to do so in the garden.
Mitch.