North East Victoria Railway

A place for the discussion of garden railways and any garden style/scale portable and/or indoor layouts
Post Reply
User avatar
FWLR
Driver
Driver
Posts: 4245
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: North East Victoria Railway

Post by FWLR » Thu Nov 28, 2019 7:36 am

Very impressive Jack. You have learnt so much already with your printer. :thumbright:
Just wish I had the courage to invest in one :(

User avatar
Mitch stack
Trainee Fireman
Trainee Fireman
Posts: 231
Joined: Tue Sep 05, 2017 9:43 am
Location: Australia

Re: North East Victoria Railway

Post by Mitch stack » Thu Nov 28, 2019 8:31 am

Good work mate! Don’t forget to mention my asbestos fingers!
Mitch - Cockatoo Creek Tramway

User avatar
Jimmyb
Fireman
Fireman
Posts: 492
Joined: Sat Nov 23, 2019 10:43 pm
Location: Weston-super-Mare

Re: North East Victoria Railway

Post by Jimmyb » Thu Nov 28, 2019 12:55 pm

Very, impressive, maybe the printer is to be invested as part of my retirement.

User avatar
Tropic Blunder
Trainee Fireman
Trainee Fireman
Posts: 188
Joined: Sun Dec 06, 2015 4:02 am
Location: Australia
Contact:

Re: North East Victoria Railway

Post by Tropic Blunder » Sat Nov 30, 2019 12:17 am

Thanks for the lovely comments, while the finished product looks good enough inevitably you dont see the 3 misprints, 15 hours of design and the weekly breakdowns that mean that even though i have 3 printers only one is ever going at any one point! Certainly handy when you're making multiples of certain objects but i do often wonder if i should have just bought some extra tools and just continued with building things out of styrene...

food for thought though I was just extremely lucky to be taught how to use CAD at school and to have quite a bit of experience with printing objects through engineering classes.
Jake

Image

User avatar
GTB
Driver
Driver
Posts: 1550
Joined: Sat Mar 05, 2011 2:46 pm
Location: Australia

Re: North East Victoria Railway

Post by GTB » Sun Dec 01, 2019 12:44 am

Tropic Blunder wrote: Thu Nov 28, 2019 1:21 am I cant remember if i posted photos of the DH being transported to the railways workshops for assembly but it has finally happened!

Towing Melbournesparks's Sentinel steam railcar. this project was started not all that long ago and has come along in massive strides.
It certainly looks like a DH, it should be impressive when finished. Have you decided on a paint scheme yet?

I've been looking at building it's older relative, the EBR 10 class, but that will have to be built the old way, unlike you I can't get my head around CAD software...... :roll:

Also interested to see the Sentinel railcar, as I've contemplated building one with a steam drive, possibly Leaping Lena from the NAR. Given the Tassie ancestry of the model is he going to be game enough to paint it in the original green flame livery?

Regards,
Graeme

User avatar
Tropic Blunder
Trainee Fireman
Trainee Fireman
Posts: 188
Joined: Sun Dec 06, 2015 4:02 am
Location: Australia
Contact:

Re: North East Victoria Railway

Post by Tropic Blunder » Sun Dec 01, 2019 6:21 am

Thanks Graeme this one will be the same as Walhallas DH,
Walhalla DH.jpg
Walhalla DH.jpg (156.05 KiB) Viewed 7695 times
the second one will be painted in a variation of the cooks construction colours.I did briefly consider using the second motor block to build an 11 because i have access to 1107 but theres too much rearranging to make it worth the time and effort

I am a big fan of the 10's that'll be quite a weighty unit if you build it all metal, any idea on what motor blocks you'll use?

It's steam powered using a proprietary boiler and engine unit i believe usually used in model boats then using brass gears and home made carden shafts off EBay. its got an automatic gas regulator and an electric water pump to maintain water level in the boiler. its capable of going around R1 curves even though its almost scale length (i believe its a window shorter then the real thing?) its going to be in a variation of the WAGR scheme as its actually a mix of both but dont quote me on that.
Jake

Image

User avatar
GTB
Driver
Driver
Posts: 1550
Joined: Sat Mar 05, 2011 2:46 pm
Location: Australia

Re: North East Victoria Railway

Post by GTB » Sun Dec 01, 2019 10:20 am

Tropic Blunder wrote: Sun Dec 01, 2019 6:21 am Thanks Graeme this one will be the same as Walhallas DH,

I am a big fan of the 10's that'll be quite a weighty unit if you build it all metal, any idea on what motor blocks you'll use?
That's an attractive colour scheme which I haven't seen before. Has DH37 been gauge converted yet, or is it still sitting in the yard on it's display track. Hmmm. You won't lose sight of a Cooks DH when it's running, it's a hi-viz scheme on a garden railway.

Walkers had some sort of technology agreement with North British and the 10 class seems to be based on the Indian YDM-1 class built by NBL in the mid '50s. So the 10 class is an old enough design to have replaced the VR G class in an alternative universe. One where the state govt. had an average IQ over 40........ 8)

My Accucraft Walker railmotor is all metal and weighs in at 5kg, so the single motor is working fairly hard to just lug itself around. I'd want to keep the weight of a large diesel model under 4kg, so the bodywork would be polystyrene sheet above the footplate with a steel underframe for strength. Drive would be a Como geared motor in each bogie with bevel final drives to the axles and the batteries and electronics would be up in the plastic body.

A metal body would also be a lot more work with all those louvres and getting rc to work reliably over reasonable distances in a metal body isn't easy. Just been through all that with the Walker railcar.

Regards,
Graeme

invicta280
Trainee Driver
Trainee Driver
Posts: 664
Joined: Wed Sep 21, 2011 9:24 pm
Location: kent england

Re: North East Victoria Railway

Post by invicta280 » Sun Dec 01, 2019 10:23 am

The DH looks great. It must be a heavy beast. I like the green coach in the background of the workshop photo. Is that a freelance model or something specific? Your mate's Sentinel railcar is a beauty too.

User avatar
Tropic Blunder
Trainee Fireman
Trainee Fireman
Posts: 188
Joined: Sun Dec 06, 2015 4:02 am
Location: Australia
Contact:

Re: North East Victoria Railway

Post by Tropic Blunder » Mon Dec 02, 2019 5:01 am

Thanks I'm certainly a lot more fond of it then having blue and gold stickered over it. Eventually ill get around to finishing the CAD drawings for the lines Clyde G8B's which will be delivered in BHP's red and silver scheme which is quite similar.
abq-15.jpg
abq-15.jpg (37.6 KiB) Viewed 7650 times
I am also planning on doing an oddball in the later BHP yellow/APM paper mill colours which will be close enough to the cooks colours to keep corporate happy about maintaining "fleet" liveries...
gob-de6-de5.jpg
gob-de6-de5.jpg (52.42 KiB) Viewed 7650 times
120490.jpg
120490.jpg (177.8 KiB) Viewed 7650 times
Neither DH has been gauge converted as far as I know. DH37 was as pictured about 3 weeks ago although I'm not sure about DH72 there hasnt been much news lately other then they're looking for donations.

The YDM-1s are quite a pretty engine actually I didnt realise the 10 class lineage went that far back. I assume that the 10 classes had the same motor and transmission as PVH 21? and EBR just ordered the same thing but as a locally made bogie job?

Sounds like a recipe for success at least most panels are fairly flat although as you said the louvres can be a pain. Will be plenty of time arranging lines of styrene unless you can make a punch and die to make them out of steel?

Thanks Invicta, loco weighs 1.5 KG so not heavy at all just the weight of the 10 AA batteries really. When i build the second one and steal a motor block out of it ill put a Kilo or two of lead in it to help it a long a bit but at the moment it has no problems hauling 7 wagons around a moderately graded track.
The green coach is a Bachmann Emily coach although its 1:22nd scale it fits in with my Australian 1:24th scale stuff and passes for some of the early TGR stock well enough although it needs a hit with some Dullcote and the whitewalls removed, if i ever find a second one ill be grabbing it for sure.

(pics are from Peter Knifes excellent Minnipa siding and Weston Langford)
Jake

Image

User avatar
GTB
Driver
Driver
Posts: 1550
Joined: Sat Mar 05, 2011 2:46 pm
Location: Australia

Re: North East Victoria Railway

Post by GTB » Mon Dec 02, 2019 11:05 pm

Tropic Blunder wrote: Mon Dec 02, 2019 5:01 am Eventually ill get around to finishing the CAD drawings for the lines Clyde G8B's which will be delivered in BHP's red and silver scheme which is quite similar.
I thought the colour scheme looked familiar..........

By the time I got to visit the Whyalla plant (I worked for BHP Steel before retirement), the G8s were being vandalised by Morrison-Knudsen into some of ugliest objects I've ever seen at the front of a train.
Tropic Blunder wrote: Mon Dec 02, 2019 5:01 am The YDM-1s are quite a pretty engine actually I didnt realise the 10 class lineage went that far back. I assume that the 10 classes had the same motor and transmission as PVH 21? and EBR just ordered the same thing but as a locally made bogie job?
The PVH-1, the YDM-1 and the 10 class all have Paxman V12 prime movers and Voith transmissions, but each has a different version as far as I know.

What possessed anyone to think a rigid frame diesel with side rods and an NBL designed cooling system like PVH-1 could be considered suitable as a main line loco escapes me. NBL went under a year or so before the 10 class were delivered and the EBR had enough experience to know what they needed by then, so I guess Walkers had someone that understood cooling systems and just got on with it. I've read that the EBR approached Tullochs first, so perhaps the VR, or the TGR, warned them off.

Presumably EBR specified a Paxman for standardisation reasons, but Walkers never used Paxmans again and the 10 class were eventually fitted with Caterpillar prime movers. The DH prototype and it's very successful descendents were all built with Caterpillar, or Cummins prime movers.
Tropic Blunder wrote: Mon Dec 02, 2019 5:01 am Sounds like a recipe for success at least most panels are fairly flat although as you said the louvres can be a pain. Will be plenty of time arranging lines of styrene unless you can make a punch and die to make them out of steel?
Not sure my toolmaking skills are up to making a press tool for pressing out louvres in metal. The easy way to make them with polystyrene sheet is to use sections of Evergreen 'clapboard' sheet (weatherboards in Oz), inset into the body work.

Regards,
Graeme

User avatar
Tropic Blunder
Trainee Fireman
Trainee Fireman
Posts: 188
Joined: Sun Dec 06, 2015 4:02 am
Location: Australia
Contact:

Re: North East Victoria Railway

Post by Tropic Blunder » Mon Dec 09, 2019 11:58 am

dear! I'm with you theyre an abomination of a loco still better then some of the more modern locos that are emerging. I was pretty sad to see DE05 (1251) shipped over to South Africa (where is it now??) there was vague motions about buying it for preservation but the asking price was too much. A shame to see the last of the original locos gone.

That makes sense I'm sure transmission technology came along in leaps and bounds in those early years :D I guess steam locos with similar or longer wheelbases were doing it successfully previously so why not have the same in a diesel. Tullochs never seemed to really have a lot of success with their designs which is why i cant figure out how they survived in the marketplace for so long! I will admit I am quite partial to the VR and TGR W's though and the DRC's even if Mechanically they were atrocious!
Jake

Image

User avatar
Tropic Blunder
Trainee Fireman
Trainee Fireman
Posts: 188
Joined: Sun Dec 06, 2015 4:02 am
Location: Australia
Contact:

Re: North East Victoria Railway

Post by Tropic Blunder » Wed Jan 22, 2020 10:37 am

Happy new year all, Had a pretty busy Christmas as there was no point taking time off because everything was on fire. No recent photos as the smoke has made that pretty pointless too but heres a video from just before christmas of some running at Alexanders. there'll be a vid of the NEVR in the next week sometime.
Jake

Image

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: North East Victoria Railway

Post by Andrew » Wed Jan 22, 2020 6:00 pm

Nice video, thank you! Coincidentally, I've watched a few videos of that line in the last few days - it seems to have tons of character and atmosphere...

Looking forward to footage of your line in due course - the fires and smoke sound terrible, I hope they're not affecting you too badly.

All the best,

Andrew.

User avatar
ge_rik
Administrator
Administrator
Posts: 6477
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: North East Victoria Railway

Post by ge_rik » Fri Jan 24, 2020 10:25 am

Just been catching up with this thread. It makes interesting reading.

Just wondered if you'd got the Deltang range problems sorted out with your DH loco?

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
Tropic Blunder
Trainee Fireman
Trainee Fireman
Posts: 188
Joined: Sun Dec 06, 2015 4:02 am
Location: Australia
Contact:

Re: North East Victoria Railway

Post by Tropic Blunder » Sat Jan 25, 2020 7:32 am

Thanks Andrew, its amazing what hes achieved with an extremely limited outlay. All the handbuilt/kitbashed models use recycled materials as does the tramway construction. The proofs in the pudding, you can create an exceptional quality line if you're willing to scrounge for materials a bit!

The smoke drift has pretty much stopped now luckily which makes breathing a bit nicer. Even though i live a few hundred kilometers from the fires Melbourne still had this amazing thick haze through it. at one point visibility was so bad at work you couldnt see the sand plant from the workshop which is less then a kilometer away...

I ended up installing another reciever into the loco which has cured the problem for now. I'll have to send an email to micron and see what they want to do with it.

The Video is pretty poor quality thanks to the poor light conditions and the fact it was taken on a phone but ill do a few more hopefully before winter rolls around


Thanks all
Jake
Jake

Image

User avatar
FWLR
Driver
Driver
Posts: 4245
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: North East Victoria Railway

Post by FWLR » Sat Jan 25, 2020 9:20 am

Great video Jake. Hopefully those fires will die out soon.

User avatar
Tropic Blunder
Trainee Fireman
Trainee Fireman
Posts: 188
Joined: Sun Dec 06, 2015 4:02 am
Location: Australia
Contact:

Re: North East Victoria Railway

Post by Tropic Blunder » Thu Jan 30, 2020 8:33 am

Hi all it seems ive gone quite mad. Another video from the weekend...
Enjoy all!
Jake

Image

User avatar
Tropic Blunder
Trainee Fireman
Trainee Fireman
Posts: 188
Joined: Sun Dec 06, 2015 4:02 am
Location: Australia
Contact:

Re: North East Victoria Railway

Post by Tropic Blunder » Wed Mar 25, 2020 5:44 am

A little project I'm banging out before we all get locked up at home. Based off an Andrew Barclay sent to Norway ive modified it to be 3' 6" and Australianised it as per Pozieres at Queenscliff. I was going to make it stephensons to use another chassies but this one was already cut up so thats sorted.

the backstory is that the NEVR needed some medium sized surburban tank engines for their lines radiating out of Melbourne to the East and South and so after hearing how impressed BHP were in South Australia ordered 6 of these tank engines. the main trunk was shortly electrified displacing these locos to short trip trains and heavy shunting work.
IMG_1817.JPG
IMG_1817.JPG (48.95 KiB) Viewed 7257 times
the prototype
90635107_2879620625463549_1185408190557192192_o.jpg
90635107_2879620625463549_1185408190557192192_o.jpg (54.78 KiB) Viewed 7257 times
8 hours of CAD later
90772744_2879620748796870_8270066722241773568_o.jpg
90772744_2879620748796870_8270066722241773568_o.jpg (110.63 KiB) Viewed 7257 times
testing colours straight off the printer (it was black on the other side)
90613448_2879620855463526_6460660973974847488_o.jpg
90613448_2879620855463526_6460660973974847488_o.jpg (110.72 KiB) Viewed 7257 times
90464638_2879620665463545_808991338270818304_o.jpg
90464638_2879620665463545_808991338270818304_o.jpg (83.47 KiB) Viewed 7257 times
after some sanding/filling and its first coat of primer
90308832_2879620998796845_540586316409077760_o.jpg
90308832_2879620998796845_540586316409077760_o.jpg (86.22 KiB) Viewed 7257 times
Im still trying to decide whether ill model it in its early guise (lined green with an oil lamp headlight)
90846497_2879620925463519_2397842127817015296_o.jpg
90846497_2879620925463519_2397842127817015296_o.jpg (94.72 KiB) Viewed 7257 times
or in regular unlined green/black with electric headlights, rerailing jacks etc
Jake

Image

User avatar
ge_rik
Administrator
Administrator
Posts: 6477
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: North East Victoria Railway

Post by ge_rik » Wed Mar 25, 2020 8:12 am

Powerful looking loco. Was the body a single print-out? I hadn't realised 3d printers could produce something quite so large.

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
Tropic Blunder
Trainee Fireman
Trainee Fireman
Posts: 188
Joined: Sun Dec 06, 2015 4:02 am
Location: Australia
Contact:

Re: North East Victoria Railway

Post by Tropic Blunder » Thu Mar 26, 2020 2:52 am

Thanks Rik, I spent a lot of time juggling between Australian prototypes (too modern) or South African Prototypes (wrong wheel arrangement/wrong feeling) but this just spoke to me for some reason.

Its actually a two piece print you can see the split down the centre of the body on photos 2 and 4. it has a spigot designed into it so it all lined up perfectly and assisted gluing which made putting it together a breeze. My two main printers (Cocoon touches) are 200x200 and the Wombot that I'm slowing trying to fix is 250x250x300 so they are capable of small 4 wheelers or smaller locos in 16mm.
Jake

Image

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest