(WH)WHR Rolling Stock

Discussion of Rolling Stock related topics should go here
User avatar
JMORG
Trainee Driver
Trainee Driver
Posts: 940
Joined: Fri Dec 09, 2011 1:16 pm
Location: Gloucester

Re: (WH)WHR Rolling Stock

Post by JMORG » Fri Sep 24, 2021 8:27 am

Looks great Andrew. Are you using the buffers in the kit? I replaced mine with smaller IP ones in the end.

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: (WH)WHR Rolling Stock

Post by Andrew » Fri Sep 24, 2021 9:37 am

JMORG wrote: Fri Sep 24, 2021 8:27 am Are you using the buffers in the kit? I replaced mine with smaller IP ones in the end.
I've done exactly the same thing, the ones supplied were HUGE... I've noticed that the original hearse had some strapping that the kit doesn't, which I'll add, but otherwise it'll be built as supplied.

By the way, does anyone have a tip for getting spray paint into the gaps between laser etched planking?

Cheers,

Andrew.

User avatar
JMORG
Trainee Driver
Trainee Driver
Posts: 940
Joined: Fri Dec 09, 2011 1:16 pm
Location: Gloucester

Re: (WH)WHR Rolling Stock

Post by JMORG » Fri Sep 24, 2021 10:53 am

Puffs at different angles? Nothing really that can be done to be honest...

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: (WH)WHR Rolling Stock

Post by Andrew » Sat Oct 16, 2021 6:26 pm

Evening all...

Although, in theory, my Ffestiniog waggons are a kind of supporting cast to the Welsh Highland stars of the show, with a new leading lady in the form of a Roundhouse England on the way, they've taken centre stage of late. Enough rubbish theatre metaphors, here's what I've been up to:

Hearse.jpg
Hearse.jpg (158.44 KiB) Viewed 3246 times
GPV.jpg
GPV.jpg (193.69 KiB) Viewed 3246 times

The hearse is now complete, and I've added larger buffers to my Swift Sixteen gunpowder van (the old ones didn't really allow the van to be propelled), and improved (I hope!) the weathered finish - that's in contrast to the hearse, the only vehicle on the line with no weathering at all and a satin finish. In addition to those two, I've added some weight to the one plank "beer waggon", so I should have a decent length Ffestiniog train for "Palmerston" to pull...

I'm not sure what's next. I've still got the two carriage projects to finish, fancy building a couple more vans, and have a half-formed idea for a rake of NWNGR slate wagons. I guess I'll see what takes my fancy...

Cheers,

Andrew.

User avatar
Peter Butler
Driver
Driver
Posts: 5219
Joined: Sun Sep 09, 2012 10:33 pm
Location: West Wales

Re: (WH)WHR Rolling Stock

Post by Peter Butler » Sat Oct 16, 2021 6:59 pm

They both look perfectly finished, weathered and not, as would be the way they were viewed at the time I'm sure. Is the hearse van green rather than black? The image on my screen looks positively dark green to me.
EDIT..... is that the Timpdon Models hearse van kit? How do you rate it?
The best things in life are free.... so why am I doing this?

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: (WH)WHR Rolling Stock

Post by Andrew » Sat Oct 16, 2021 8:02 pm

Peter Butler wrote: Sat Oct 16, 2021 6:59 pm They both look perfectly finished, weathered and not, as would be the way they were viewed at the time I'm sure. Is the hearse van green rather than black? The image on my screen looks positively dark green to me.
EDIT..... is that the Timpdon Models hearse van kit? How do you rate it?
Glad you like 'em Peter, thanks! I actually thought of you and your recent kit-building as I was making the hearse van - I think you'd enjoy it. On the whole I thought it was excellent - well designed, with nicely cut parts and some of the clearest instructions I've come across. I was glad I took the trouble to add the strapping around the bottom (which features on the original but not in the kit), and to change the very large couplings supplied for something smaller (very easily done, with no surgery to the van required), but those are pretty minor niggles.

It is black - I think the shiny finish is reflecting the lawn!

All the best,

Andrew

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: (WH)WHR Rolling Stock

Post by Andrew » Sat Oct 16, 2021 8:22 pm

I forgot to say - the turned brass "urns" for the corners of the roof are superb, my favourite part of the kit...

User avatar
Old Man Aaron
Trainee Driver
Trainee Driver
Posts: 795
Joined: Wed Oct 19, 2016 11:08 am
Location: Sunshine Coast QLD, Australia

Re: (WH)WHR Rolling Stock

Post by Old Man Aaron » Tue Oct 19, 2021 6:49 am

You should be right proud of they way they've turned out. Love the finish on the finials, it's just right.
Regards,
Aaron - Scum Class Works

User avatar
philipy
Moderator
Moderator
Posts: 5033
Joined: Sun Jan 30, 2011 3:00 pm
Location: South Northants

Re: (WH)WHR Rolling Stock

Post by philipy » Tue Oct 19, 2021 8:48 am

Very nicely done, Andrew. I particularly like the patches of blistering rust.
Philip

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: (WH)WHR Rolling Stock

Post by Andrew » Thu Nov 11, 2021 12:25 pm

Hi all,

The latest project in the Carriage and Wagon works is a model of Ffestiniog Van 101, which I think is the one often seen in their demonstration goods trains and currently numbered 154.

I couldn't find any drawings, so created my own based on all the photos I could find of the real thing, so hopefully it's more or less right. Various details seem to have changed in the course of rebuilds over the years, from vents coming and going to plank widths changing - mine is intended to represent the van in its 1920s condition.

Here's where it's at currently:

FR Van 101 A.jpg
FR Van 101 A.jpg (123.65 KiB) Viewed 2644 times

I'm pleased with the curved buffer beams. I was going to leave them out, doubting my ability to make them neatly, but then I found some laser cut MDF ones I'd cut off another kit, so I extended them a little and used those. I'll paint the body next, then letter and weather it (I'm guessing the latter will need to be quite heavy to hide the inadequacies of the former!), then add running gear and make the strapping...

I was hoping to have it ready in time to run it with my new RH Palmerston, but I've just heard that's ready - very exciting!

Cheers,

Andrew

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: (WH)WHR Rolling Stock

Post by ge_rik » Thu Nov 11, 2021 4:25 pm

Looks like it's going to be another great addition to the fleet

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
Peter Butler
Driver
Driver
Posts: 5219
Joined: Sun Sep 09, 2012 10:33 pm
Location: West Wales

Re: (WH)WHR Rolling Stock

Post by Peter Butler » Thu Nov 11, 2021 4:54 pm

Just found an image of the van, very nice looking vehicle with plenty of strapping detail to follow. Looking forward to it....
4581919529_007bacea3e_b.jpg
4581919529_007bacea3e_b.jpg (256.8 KiB) Viewed 2621 times
The best things in life are free.... so why am I doing this?

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: (WH)WHR Rolling Stock

Post by Andrew » Thu Nov 11, 2021 5:19 pm

Peter Butler wrote: Thu Nov 11, 2021 4:54 pm Just found an image of the van...
That's the one! Nice, isn't it? I like the unusually small radius of the roof, among other things.

Rik, I partly had your line, and in particular your goods train operations in mind when I picked this one to build. I hope to try out something similar next year but needed some more vehicles suitable for flour ( a relatively big FR/WHR traffic flow) and general perishables. I could have gone for the WHR van which I've not modelled yet, but I rather liked this one...

I like building vans - no interiors to worry about!

Cheers,

Andrew.

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: (WH)WHR Rolling Stock

Post by ge_rik » Thu Nov 11, 2021 6:38 pm

Never thought about flour as a staple for goods traffic. I may need to look again at the weightings for my freight movements on the PLR - unless, of course, barabrith and Welsh cakes were a particularly strong feature in the communities served by the WHR and FR..... :lol:

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: (WH)WHR Rolling Stock

Post by Andrew » Thu Nov 11, 2021 7:49 pm

ge_rik wrote: Thu Nov 11, 2021 6:38 pm Never thought about flour as a staple for goods traffic. I may need to look again at the weightings for my freight movements on the PLR - unless, of course, barabrith and Welsh cakes were a particularly strong feature in the communities served by the WHR and FR..... :lol:
There was a large-ish flour mill in Porthmadog, the building may still be there. Of I think the main traffic was to a bakery in Penrhyn on the FR, but it also made its way up the WHR. That and beer for the local pubs ( mainly in Beddgelert, I think) seem to have been the fairly regular traffic.

The old F&WH Rlys weren't above clichés, they had station mistresses in national costume at Tan-y-Bwlch and Beddgelert - they sold postcards, so maybe they flogged Welsh cakes too?!

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: (WH)WHR Rolling Stock

Post by ge_rik » Fri Nov 12, 2021 7:40 am

The water mill beside the PLR is based on the "grist mill" which was originally at Bulkeley. I'd always thought that "grist" was a sort of coarse flour or meal used for animal feed but I've just found out that "grist" actually refers to cereal grain which has been prepared for grinding - hence "grist for the mill". So, it looks like I already have a reason for flour traffic on the PLR.

It never ceases to surprise me just how much ancillary knowledge is needed to run a model railway ....... :shock:


Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
philipy
Moderator
Moderator
Posts: 5033
Joined: Sun Jan 30, 2011 3:00 pm
Location: South Northants

Re: (WH)WHR Rolling Stock

Post by philipy » Fri Nov 12, 2021 8:05 am

ge_rik wrote: Fri Nov 12, 2021 7:40 am I'd always thought that "grist" was a sort of coarse flour or meal used for animal feed but I've just found out that "grist" actually refers to cereal grain which has been prepared for grinding - hence "grist for the mill".
Many years ago, I ran the QC lab in a flour mill and I can confirm that you are spot on. Most flours are are made from a combination of wheat from various sources blended together and that is called the grist. i.e. Canadian plus French plus English, for example, blended to give specific moisture levels, gluten strengths and other characteristics in the finished flour.
Philip

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: (WH)WHR Rolling Stock

Post by ge_rik » Fri Nov 12, 2021 11:01 am

philipy wrote: Fri Nov 12, 2021 8:05 am Many years ago, I ran the QC lab in a flour mill and I can confirm that you are spot on. Most flours are are made from a combination of wheat from various sources blended together and that is called the grist. i.e. Canadian plus French plus English, for example, blended to give specific moisture levels, gluten strengths and other characteristics in the finished flour.
I'm 70 years old and still learning ...... 🤔

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: (WH)WHR Rolling Stock

Post by Andrew » Sat Nov 20, 2021 12:20 pm

Just a little more progress on this one - wheels, roof, a few initial details, and a coat of primer...

FR Van 101 B.jpg
FR Van 101 B.jpg (84.67 KiB) Viewed 3022 times

User avatar
Old Man Aaron
Trainee Driver
Trainee Driver
Posts: 795
Joined: Wed Oct 19, 2016 11:08 am
Location: Sunshine Coast QLD, Australia

Re: (WH)WHR Rolling Stock

Post by Old Man Aaron » Sun Nov 21, 2021 6:19 am

Lots of character in that already. :thumbright:
Regards,
Aaron - Scum Class Works

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests