Page 8 of 8

Re: Live Diesel 1/12th scale

Posted: Sat Oct 03, 2020 3:07 am
by dewintondave
Being a fan of narrowboats I decided on a speed wheel for engine speed adjustment on the loco
rsz_dsc00591.jpg
rsz_dsc00591.jpg (57.51 KiB) Viewed 5915 times

Another hole through the silencer was required, I was able to solder the tube in without damaging the paint
rsz_dsc00588.jpg
rsz_dsc00588.jpg (43.06 KiB) Viewed 5915 times

Adjusting the voltage for the LED rear light
rsz_dsc00592a.jpg
rsz_dsc00592a.jpg (109.87 KiB) Viewed 5915 times

Re: Live Diesel 1/12th scale

Posted: Sun Oct 04, 2020 10:00 am
by FWLR
Looking fantastic has always Dave.

Re: Live Diesel 1/12th scale

Posted: Fri Oct 23, 2020 7:00 am
by dewintondave
FWLR wrote: Sun Oct 04, 2020 10:00 am Looking fantastic has always Dave.
Thanks Rod :thumbup:

Had a good run of the loco yesterday. Gave the new "speed wheel" a good going. It's connected to a 10BA thread so the pitch is very fine so its very insensitive. I spun the wheel to increase the revs before engaging the clutch, then when the loco is moving spin the wheel back again to decrease the speed.

Last week I gave the cylinder head a good clean of all the gunk in the rocker area, it had a lot of castor oil jelly building up. I now lube the valve with 30W 4-stroke lawnmower oil. There was a bit of slack on the exhaust valve adjustment so I fixed that too. Here is the head after the run yesterday


rsz_dsc00596.jpg
rsz_dsc00596.jpg (53.38 KiB) Viewed 5700 times