Archangel Range

Discussion of Live Steam locomotives should be located here
kandnwlr
Trainee Driver
Trainee Driver
Posts: 998
Joined: Fri Dec 02, 2011 3:14 pm
Location: Alsace, France

Post by kandnwlr » Mon Mar 24, 2014 7:43 pm

IrishPeter:98206 wrote:Is a broom in the chimney the local version of the "Do not move" sign? :idea:

Peter in AZ
There was a Rowland Emmet cartoon somewhere which showed a driver pushing a chimney brush up a funnel and school books, satchels etc. coming out the top. I was going to "open the front door" of the boiler, but sadly Stewart Browne has constructed it so that the whole of the front comes away for cleaning ... so my cunning plan to stick one of my St. Trinians girls in there head first was foiled. But you get the idea ....

I think that your explanation has a basis in logic that sadly I can´t attain  ;)  :roll:

User avatar
Peter Butler
Driver
Driver
Posts: 5219
Joined: Sun Sep 09, 2012 10:33 pm
Location: West Wales

Post by Peter Butler » Mon Mar 24, 2014 10:30 pm

kandnwlr:98217 wrote:
There was a Rowland Emmet cartoon somewhere which showed a driver pushing a chimney brush up a funnel and school books, satchels etc. coming out the top. :
If you have a Rowland Emett question, then I'm your man!
I have all of his books way back to 1943 and can show the cartoon you mention from 'Emett's Ministry of Transport', published 1981.
Image

Another version on the same theme is taken from 'The Early Morning Milk Train'. Two identical volumes of the same cartoons were printed in Britain by John Murray in 1976, and in USA by The Stephen Greene Press in 1977....
Image

kandnwlr
Trainee Driver
Trainee Driver
Posts: 998
Joined: Fri Dec 02, 2011 3:14 pm
Location: Alsace, France

Post by kandnwlr » Sat Mar 29, 2014 12:41 pm

Very kind. Your collection is far more comprehensive than mine!

cncmodeller
Trainee Fireman
Trainee Fireman
Posts: 233
Joined: Sat May 11, 2013 4:15 pm
Location: lincolnshire

New Build Archangel

Post by cncmodeller » Sat May 09, 2015 10:57 am

This discussion prompted me to order a new Skylark as I always regretted selling my 1985 one, Stewarts photo shows it below, as you can see there are many improvements in detail and this one is a meths burner which I personally prefer and is in keeping with the origins of this branch of Narrow Gauge modelling.

ImageArchangel Steam Locomotive Skylark C and M Princess 2015 Build 001 by uniquenarrowgauge, on Flickr

ImageArchangel Steam Locomotive Skylark C and M Princess 2015 Build 002 by uniquenarrowgauge, on Flickr
Last edited by cncmodeller on Sun Jan 26, 2020 11:03 am, edited 2 times in total.

kandnwlr
Trainee Driver
Trainee Driver
Posts: 998
Joined: Fri Dec 02, 2011 3:14 pm
Location: Alsace, France

Re: New Build Archangel

Post by kandnwlr » Sat May 09, 2015 11:17 am

cncmodeller:110698 wrote:This discussion prompted me to order a new Skylark as I always regretted selling my 1985 one, Stewarts photo shows it below, as you can see there are many improvements in detail and this one is a meths burner which I personally prefer and is in keeping with the origins of this branch of Narrow Gauge modelling.
Now Skylark is a Thing of Beauty.

User avatar
Keith S
Driver
Driver
Posts: 1624
Joined: Thu Feb 24, 2011 11:44 pm
Location: Canada

Post by Keith S » Sat May 09, 2015 4:54 pm

My word, what an attractive engine.

HereticUK
Trainee Fireman
Trainee Fireman
Posts: 124
Joined: Thu Aug 22, 2013 12:38 am
Location: Gloucestershire, UK

Post by HereticUK » Sat May 09, 2015 8:05 pm

My goodness that is a thing of beauty indeed! May I ask how much that has cost you? Is it slip eccentric?

User avatar
laalratty
Retired Director
Retired Director
Posts: 3887
Joined: Wed Jan 16, 2008 5:35 pm
Location: Morecambe

Post by laalratty » Sat May 09, 2015 8:33 pm

Lovely loco, Stewart really is turning out some nice locos at the moment. Last week, I had the absolute pleasure of operating a 2015 build Sgt Murphey. Unlike many of its predecessors, it had twin cylinders, reversible Marshall valve gear and gas firing, but it was a complete joy to run, and looked understated yet magnificent in satin black.
"What the hell is that?"
"It's a model icebreaker sir."
"It's a bit big isn't it?"
"It's a full scale model sir....."

cncmodeller
Trainee Fireman
Trainee Fireman
Posts: 233
Joined: Sat May 11, 2013 4:15 pm
Location: lincolnshire

Post by cncmodeller » Sat May 09, 2015 11:19 pm

HereticUK:110720 wrote:My goodness that is a thing of beauty indeed! May I ask how much that has cost you? Is it slip eccentric?
Yes it was just over 3K which actually I worked out is no more expensive that the one I had in 1985. It is slip eccentric but that is not an issue for me as I wanted It from this Iconic builder.

Paul H
Cleaner
Cleaner
Posts: 89
Joined: Tue Mar 01, 2011 8:17 am

Post by Paul H » Sun May 10, 2015 1:44 am

That is lovely! Stewart does nice work. I certainly like my Princess. I ended up making a front wall for the firebox to keep the breeze at bay, but it is a really exquisite piece of model building.

cncmodeller
Trainee Fireman
Trainee Fireman
Posts: 233
Joined: Sat May 11, 2013 4:15 pm
Location: lincolnshire

Post by cncmodeller » Thu Jan 28, 2016 2:31 pm

Last edited by cncmodeller on Wed Jan 22, 2020 11:02 pm, edited 2 times in total.

cncmodeller
Trainee Fireman
Trainee Fireman
Posts: 233
Joined: Sat May 11, 2013 4:15 pm
Location: lincolnshire

Re: Archangel Range

Post by cncmodeller » Sat Jun 24, 2017 9:14 pm

Newly delivered [ June 2017 ] Vale of Rheidol 2-6-2 Tank Meths internally fired with working side tanks and feed pumps.


Image[/url]Archangel VOR 2017 Build by uniquenarrowgauge, on Flickr[/img]
Image[/url]Archangel VOR 2017 Build002 by uniquenarrowgauge, on Flickr[/img]
[imgImageArchangel VOR 2017 Build 006 by uniquenarrowgauge, on Flickr][/img]
[imgImageArchangel VOR 2017 Build 004 by uniquenarrowgauge, on Flickr][/img]
[imgImageArchangel VOR 2017 Build 003 by uniquenarrowgauge, on Flickr][/img]
ImageArchangel Models VOR 2017 Build Loco by uniquenarrowgauge, on Flickr
John
Last edited by cncmodeller on Wed Jan 22, 2020 11:04 pm, edited 3 times in total.

User avatar
Killian Keane
Trainee Fireman
Trainee Fireman
Posts: 194
Joined: Wed Nov 16, 2016 9:17 pm

Re: Archangel Range

Post by Killian Keane » Sun Jun 25, 2017 7:31 pm

:shock: :D what a beautiful loco! She must have cost an arm and a leg judging by the cost of the skylark
Blokes with tea can build anything

cncmodeller
Trainee Fireman
Trainee Fireman
Posts: 233
Joined: Sat May 11, 2013 4:15 pm
Location: lincolnshire

Re: Archangel Range

Post by cncmodeller » Sat Jul 01, 2017 8:27 am

It runs as smooth as a sowing machine, for a two wick burner on a large boiler it steams up incredibly quickly and keeps pace with the regulator no problem, I particularly like the meths control valve and the cross head feed pump is very controllable, you don't get that feeling of it running away like some of my gas fired locos and no noise.

cncmodeller
Trainee Fireman
Trainee Fireman
Posts: 233
Joined: Sat May 11, 2013 4:15 pm
Location: lincolnshire

Re: Archangel Range

Post by cncmodeller » Sun Jan 21, 2018 2:08 pm


cncmodeller
Trainee Fireman
Trainee Fireman
Posts: 233
Joined: Sat May 11, 2013 4:15 pm
Location: lincolnshire

Re: Archangel Range

Post by cncmodeller » Sun Jan 21, 2018 2:12 pm

New Build Archangel Vale of Rheidol 2-6-2 Loco with Newly built but 40 year old Archangel Kit of Vale of Rheidol 'short' Coach.

ImageArchangel Models Vale of Rheidol Train by uniquenarrowgauge, on Flickr
ImageArchangel Models VOR 2017 Build Loco by uniquenarrowgauge, on Flickr

ImageArchangel Models VOR 2017 Build Loco by uniquenarrowgauge, on Flickr
Last edited by cncmodeller on Wed Jan 22, 2020 11:06 pm, edited 1 time in total.

User avatar
LNR
Driver
Driver
Posts: 1533
Joined: Sat Feb 27, 2016 5:26 am
Location: Australia

Re: Archangel Range

Post by LNR » Mon Jan 22, 2018 12:28 am

Attractive model, to my eyes they looked far better this way, than with the extra width to the tanks, and as for the enormous air pump well enough said.
Grant.

cncmodeller
Trainee Fireman
Trainee Fireman
Posts: 233
Joined: Sat May 11, 2013 4:15 pm
Location: lincolnshire

Re: Archangel Range

Post by cncmodeller » Sat Aug 18, 2018 9:32 pm

Picked up this on ebay as a non working wreck a 1976 Archangel Princess , just finished restoring it, have made a couple of minor cosmetic changes and boxed in the side tanks and moved them out as per the 1980's version, made new one piece footplate, made one new buffer beam and reinstated the buffers, new smokebox door, new cab rear, new whistle and control valve, new dome support ,moved the dummy cylinders in slightly so the geometry is not so much at an angle, re-positioned the meths tank filler from out of the cab floor and finally new side tank hand rails.
BEFORE:-
ImageArchangel Princess before restoration by uniquenarrowgauge, on Flickr
ImageArchangel Princess 1976 before restoration by uniquenarrowgauge, on Flickr
AFTER RESTORATION:-
ImageArchangel Ffestiniog Princess after restoration by uniquenarrowgauge, on Flickr
ImageArcahngel Ffestiniog Princess after restoration by uniquenarrowgauge, on Flickr
ImageArchangel Ffestiniog Princess after restoration by uniquenarrowgauge, on Flickr
John
Last edited by cncmodeller on Wed Jan 22, 2020 11:09 pm, edited 1 time in total.

User avatar
Killian Keane
Trainee Fireman
Trainee Fireman
Posts: 194
Joined: Wed Nov 16, 2016 9:17 pm

Re: Archangel Range

Post by Killian Keane » Sat Aug 18, 2018 9:36 pm

Might not be to scale but that is absolutely gorgeous! :thumbright:
Blokes with tea can build anything

User avatar
tom_tom_go
Driver
Driver
Posts: 4824
Joined: Wed Feb 23, 2011 3:08 am
Location: Kent, UK
Contact:

Re: Archangel Range

Post by tom_tom_go » Sat Aug 18, 2018 9:39 pm

Looks like you are ready to sell that?

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests