Lady Anne Kit Build

Discussion of Live Steam locomotives should be located here
Jackf88
Cleaner
Cleaner
Posts: 22
Joined: Wed Apr 11, 2018 12:48 pm

Lady Anne Kit Build

Post by Jackf88 » Fri Jun 01, 2018 12:51 pm

Hi all,

I'm Jack and I'm pretty new to live steam but am a steam crew volunteer and am an engineer by trade so I thought I'd take the plunge on a kit build lady Anne!

I'm mid way through(ISH) my first live steam build having assembled the chassis and fitted all boiler parts necessary for running (body to follow) I'm currently waiting for a chuffer and a shiny gold on black name plate 'Scafell Pike'

On first two runs the loco has a pronounced side to side motion of the rear axle, can't decide if this is down to poor adjustment of the con rods or valve timing!? Any help is greatly appreciated! :D

Pics to follow ๐Ÿ‘

User avatar
Peter Butler
Driver
Driver
Posts: 5219
Joined: Sun Sep 09, 2012 10:33 pm
Location: West Wales

Re: Lady Anne Kit Build

Post by Peter Butler » Fri Jun 01, 2018 2:25 pm

Hi Jack and welcome to the Forum. Although I am not a live steam person myself, and therefore can't give any advice to you about your build, I am keen to see the progress and final result of your build.
Please let us have pictures and any details which might share your experience.
Last edited by Peter Butler on Sat Jun 02, 2018 8:56 pm, edited 1 time in total.
The best things in life are free.... so why am I doing this?

User avatar
TonyW
Driver
Driver
Posts: 1357
Joined: Fri May 16, 2008 9:25 am
Location: North Wales
Contact:

Re: Lady Anne Kit Build

Post by TonyW » Fri Jun 01, 2018 3:22 pm

Jackf88 wrote: โ†‘Fri Jun 01, 2018 12:51 pm... the loco has a pronounced side to side motion of the rear axle ...
Probably the cranks are not fully located on the axle ends. Remove the rods then on all three axles:
- Remove the crank fixing screws
- Using soft jaws (e.g. wood) in a vice squeeze the cranks fully home on to the axles
- Re-fit crank fixing screws and tighten fully by using two screwdrivers, one on each end of the axle
Be careful to avoid bending the fixed crank pins on the rear axle!

If that doesn't sort it out then Roundhouse can supply suitable washers that fit between the cranks and the axle bearings.
Tony Willmore
Rhos Helyg Locomotive Works: http://www.rhoshelyg.me.uk
Facebook: https://www.facebook.com/RhosHelygLocoWorks

Jackf88
Cleaner
Cleaner
Posts: 22
Joined: Wed Apr 11, 2018 12:48 pm

Re: Lady Anne Kit Build

Post by Jackf88 » Fri Jun 01, 2018 3:45 pm

TonyW wrote: โ†‘Fri Jun 01, 2018 3:22 pm
Jackf88 wrote: โ†‘Fri Jun 01, 2018 12:51 pm... the loco has a pronounced side to side motion of the rear axle ...
Probably the cranks are not fully located on the axle ends. Remove the rods then on all three axles:
- Remove the crank fixing screws
- Using soft jaws (e.g. wood) in a vice squeeze the cranks fully home on to the axles
- Re-fit crank fixing screws and tighten fully by using two screwdrivers, one on each end of the axle
Be careful to avoid bending the fixed crank pins on the rear axle!

If that doesn't sort it out then Roundhouse can supply suitable washers that fit between the cranks and the axle bearings.
Great, thank you Tony! I have to admit I wasn't convinced the G clamp I used was doing an amazing job when I fitted them. Will give it a try asap!

Jackf88
Cleaner
Cleaner
Posts: 22
Joined: Wed Apr 11, 2018 12:48 pm

Re: Lady Anne Kit Build

Post by Jackf88 » Sat Jun 02, 2018 7:18 am

Photo's as promised :thumbright:

Obviously need to do some more painting but will probably wait until I get the body kit and have a session!

Also I can't seem to get them to appear in order so apologies for multi post :scratch:
Attachments
IMG_20180411_172554 (1024x768) (800x600).jpg
IMG_20180411_172554 (1024x768) (800x600).jpg (369.38 KiB) Viewed 5322 times

Jackf88
Cleaner
Cleaner
Posts: 22
Joined: Wed Apr 11, 2018 12:48 pm

Re: Lady Anne Kit Build

Post by Jackf88 » Sat Jun 02, 2018 7:19 am

IMG_20180428_135544 (1024x768) (800x600).jpg
IMG_20180428_135544 (1024x768) (800x600).jpg (325.88 KiB) Viewed 5321 times

Jackf88
Cleaner
Cleaner
Posts: 22
Joined: Wed Apr 11, 2018 12:48 pm

Re: Lady Anne Kit Build

Post by Jackf88 » Sat Jun 02, 2018 7:20 am

IMG_20180506_111518 (1024x768) (800x600).jpg
IMG_20180506_111518 (1024x768) (800x600).jpg (341.84 KiB) Viewed 5318 times

Jackf88
Cleaner
Cleaner
Posts: 22
Joined: Wed Apr 11, 2018 12:48 pm

Re: Lady Anne Kit Build

Post by Jackf88 » Sat Jun 02, 2018 7:21 am

IMG_20180531_202351 (800x600).jpg
IMG_20180531_202351 (800x600).jpg (249.19 KiB) Viewed 5318 times

bazzer42
Driver
Driver
Posts: 1215
Joined: Sun Nov 25, 2012 1:37 pm
Location: Forest of Dean

Re: Lady Anne Kit Build

Post by bazzer42 » Sat Jun 02, 2018 7:54 am

That is looking nice, afraid I can't help with any advice on construction but do have a soft spot for Lady Anne. The body is just right (not that yours is fitted yet!). Any decision on colour?

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: Lady Anne Kit Build

Post by FWLR » Sat Jun 02, 2018 8:22 am

I am really going to after try and get some money together and again try and scratch build a Lady Anneโ€ฆ.itโ€™s my next and last live steamerโ€ฆ.. :)

Welcome Jack, hope we can see more soon of your build, itโ€™s looking brilliant unto nowโ€ฆ.. :lol: :lol:

Jackf88
Cleaner
Cleaner
Posts: 22
Joined: Wed Apr 11, 2018 12:48 pm

Re: Lady Anne Kit Build

Post by Jackf88 » Sat Jun 02, 2018 11:19 am

bazzer42 wrote: โ†‘Sat Jun 02, 2018 7:54 am That is looking nice, afraid I can't help with any advice on construction but do have a soft spot for Lady Anne. The body is just right (not that yours is fitted yet!). Any decision on colour?
Thank mate, colour wise I was fairly set on brunswick green, but having recently seen a couple done up as BR Black so now I'm not sure?! ๐Ÿค”

User avatar
tom_tom_go
Driver
Driver
Posts: 4824
Joined: Wed Feb 23, 2011 3:08 am
Location: Kent, UK
Contact:

Re: Lady Anne Kit Build

Post by tom_tom_go » Sat Jun 02, 2018 11:56 am

That's the most gloss frame I have ever seen, it has a mirror finish!

What did you use, looks like it will be very durable.

User avatar
Keith S
Driver
Driver
Posts: 1624
Joined: Thu Feb 24, 2011 11:44 pm
Location: Canada

Re: Lady Anne Kit Build

Post by Keith S » Sat Jun 02, 2018 8:42 pm

How did you get on pressing the cranks down a bit more firmly on the axles? Looking at your pictures there does seem to be quite a bit of space there. After all, 'tis only the wheels on the inside or the cranks on the outside that stop lateral movements of the axles, and the beating of the reciprocating motion on the turning axle does make it want to "walk" back and forth: you see this force in action on 0-4-0 locomotives "waddling" as they make their way along.

Jackf88
Cleaner
Cleaner
Posts: 22
Joined: Wed Apr 11, 2018 12:48 pm

Re: Lady Anne Kit Build

Post by Jackf88 » Sat Jun 02, 2018 10:42 pm

tom_tom_go wrote: โ†‘Sat Jun 02, 2018 11:56 am That's the most gloss frame I have ever seen, it has a mirror finish!

What did you use, looks like it will be very durable.
Haha it was a cellulose gloss black from the local DIY place! Don't look too close ๐Ÿ˜‚ shinier than I'd like to be honest but it's gone on nice and thick so hopefully hard wearing! Took forever to cure!

Jackf88
Cleaner
Cleaner
Posts: 22
Joined: Wed Apr 11, 2018 12:48 pm

Re: Lady Anne Kit Build

Post by Jackf88 » Sat Jun 02, 2018 10:44 pm

Keith S wrote: โ†‘Sat Jun 02, 2018 8:42 pm How did you get on pressing the cranks down a bit more firmly on the axles? Looking at your pictures there does seem to be quite a bit of space there. After all, 'tis only the wheels on the inside or the cranks on the outside that stop lateral movements of the axles, and the beating of the reciprocating motion on the turning axle does make it want to "walk" back and forth: you see this force in action on 0-4-0 locomotives "waddling" as they make their way along.
Haven't had a chance yet, but as soon as I've down it and had a steam up will make sure I post! Ran really nicely otherwise, nice steam beat ๐Ÿ˜Š it was possible to stop it waddling by putting a little side pressure win the wheels but you could tell by the sound it was still not quite right

User avatar
IanC
Trainee Driver
Trainee Driver
Posts: 798
Joined: Mon Feb 15, 2016 9:15 am
Location: Nr. Warrington, Cheshire

Re: Lady Anne Kit Build

Post by IanC » Sun Jun 03, 2018 9:19 am

Hi Jack.

I have a Lady Anne. Mine was factory built. I love it. Mine happens to be in Maroon, but as it's a popular colour I've seen lots in different colours. It seems to suit them all! In all honesty I'd love another, but that would give me a dilema. I like black too so would it be black, stick with maroon for a 'fleet colour' or go with something different like Brunswick Green? While on the subject of colour, if you look at full sized locomotives of all gauges, I've never come across one where the back of the buffer beams are painted red. However it's your locomotive, just go with what you think is good. Because you've put it together you'll know how to take it apart if you want to make mods later, or change the colour.

I can't offer any build tips, but will follow with interest. I might get a kit and have a go myself.

Ian
Ian

User avatar
TonyW
Driver
Driver
Posts: 1357
Joined: Fri May 16, 2008 9:25 am
Location: North Wales
Contact:

Re: Lady Anne Kit Build

Post by TonyW » Sun Jun 03, 2018 10:27 am

IanC wrote: โ†‘Sun Jun 03, 2018 9:19 am... I've never come across one where the back of the buffer beams are painted red ...
Amen to that! Add unpainted shiny wheels to the list too.

Jackf88
Cleaner
Cleaner
Posts: 22
Joined: Wed Apr 11, 2018 12:48 pm

Re: Lady Anne Kit Build

Post by Jackf88 » Sun Jun 03, 2018 10:39 am

TonyW wrote: โ†‘Sun Jun 03, 2018 10:27 am
IanC wrote: โ†‘Sun Jun 03, 2018 9:19 am... I've never come across one where the back of the buffer beams are painted red ...
Amen to that! Add unpainted shiny wheels to the list too.
Haha yeah bufferbeams was a school boy error, will be painting backs black when I next do some paint ๐Ÿ˜‚

I'd never really thought of the wheels but you're right, probably paint black at the next opportunity too!

User avatar
IanC
Trainee Driver
Trainee Driver
Posts: 798
Joined: Mon Feb 15, 2016 9:15 am
Location: Nr. Warrington, Cheshire

Re: Lady Anne Kit Build

Post by IanC » Sun Jun 03, 2018 10:58 am

Jackf88 wrote: โ†‘Sun Jun 03, 2018 10:39 am
TonyW wrote: โ†‘Sun Jun 03, 2018 10:27 am
IanC wrote: โ†‘Sun Jun 03, 2018 9:19 am... I've never come across one where the back of the buffer beams are painted red ...
Amen to that! Add unpainted shiny wheels to the list too.
Haha yeah bufferbeams was a school boy error, will be painting backs black when I next do some paint ๐Ÿ˜‚

I'd never really thought of the wheels but you're right, probably paint black at the next opportunity too!
yes, I missed off the shiny wheels too. Mine are black. I'm gradually losing most of the brass handrails, boiler bands etc. A painted finish looks better IMHO.

Ian
Ian

User avatar
tom_tom_go
Driver
Driver
Posts: 4824
Joined: Wed Feb 23, 2011 3:08 am
Location: Kent, UK
Contact:

Re: Lady Anne Kit Build

Post by tom_tom_go » Sun Jun 03, 2018 11:02 am

Could you bring yourself to join the mucky crew club?

https://gardenrails.org/forum/viewtopic.php?f=36&t=6823

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests