Bogie brake van
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Bogie brake van
Got this off eBay recently, quite pleased with it:
I did not think something this big would work on my small line but it goes round quite well and the overhang on the tight curves is not as bad as I expected.
First mods will be to get rid of the buffers for choppers, cut down the bogies so there is no gap between the wheels/axle boxes and knock up the bits that are missing (steps mainly).
I did not think something this big would work on my small line but it goes round quite well and the overhang on the tight curves is not as bad as I expected.
First mods will be to get rid of the buffers for choppers, cut down the bogies so there is no gap between the wheels/axle boxes and knock up the bits that are missing (steps mainly).
- Soar Valley Light
- Driver
- Posts: 1451
- Joined: Sun Dec 08, 2013 5:18 pm
- Location: North West Leicestershire
- tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
- Contact:
Keep tidying it up tom, Its a GRS L&B van 23 by the looks of it
If it can be made full scale it can be made 16mm
My line: http://gardenrails.myfreeforum.org/about7200.html
My line: http://gardenrails.myfreeforum.org/about7200.html
Who is online
Users browsing this forum: No registered users and 4 guests