Static points, has anybody created a working set?

What is your latest project?
User avatar
BorisSpencer
Fireman
Fireman
Posts: 251
Joined: Thu Apr 05, 2018 2:36 pm
Location: East Northants

Static points, has anybody created a working set?

Post by BorisSpencer » Mon Jun 28, 2021 3:29 pm

As per the title, I've seen the concept at work from a distance and would love to give it a try.
However sacrificing a perfectly serviceable set of points on the alter of curiosity seems rather extravagant.

For the unenlightened I'm talking about a set of points with no moving parts that allow traffic to trail through from either diverging road, but always send facing traffic to the same exit.

It appears to involve trimming one blade and then adding a carefully placed check rail or two. If anyone has a working version would it be possible to post a picture looking directly from above? The proposed starting point (forgive the pun) will be a Peco short radius turnout.

If you are still wondering a pair could be used to control a passing loop with trains always bearing to the left, or in my case controlling the entry to a triangular junction from a branch where traffic always needs to turn right onto the mainline and then exit from the left.

User avatar
Scrat
Trainee Fireman
Trainee Fireman
Posts: 180
Joined: Mon Jun 08, 2020 7:24 am

Re: Static points, has anybody created a working set?

Post by Scrat » Tue Jun 29, 2021 10:36 am

How about using a set of spring-loaded points?

11thHour
Trainee Fireman
Trainee Fireman
Posts: 116
Joined: Mon Mar 26, 2012 4:00 am
Location: Wodonga, Vic. Land of Oz

Re: Static points, has anybody created a working set?

Post by 11thHour » Tue Jun 29, 2021 2:20 pm

1E648061-BCBB-42CC-82A4-783252E3E0F6.jpeg
1E648061-BCBB-42CC-82A4-783252E3E0F6.jpeg (4.39 MiB) Viewed 7892 times

User avatar
Melbournesparks
Cleaner
Cleaner
Posts: 42
Joined: Sat Apr 08, 2017 2:55 am
Location: City of Eltham

Re: Static points, has anybody created a working set?

Post by Melbournesparks » Wed Jun 30, 2021 8:02 am

Out of curiosity I tried pulling the point blade out of a conventional single bladed set of points, which still works as it turns out. There's a bit of a bump in the facing direction because the wheels fall into the hole where the point blade is supposed to be, but you'd fix that if you were building one like this by design.

Image

The point blade normally goes at the top. Excuse all the dust and crud that gets dragged in here by the rollingstock at this time of year.

Image

11thHour
Trainee Fireman
Trainee Fireman
Posts: 116
Joined: Mon Mar 26, 2012 4:00 am
Location: Wodonga, Vic. Land of Oz

Re: Static points, has anybody created a working set?

Post by 11thHour » Wed Jun 30, 2021 9:52 am

Melbournesparks wrote: Wed Jun 30, 2021 8:02 am There's a bit of a bump in the facing direction because the wheels fall into the hole where the point blade is supposed to be, but you'd fix that if you were building one like this by design.
On the 1:1 version above ( admittedly not quite what you want) there can be seen a pad for the flange to run on when transitioning. This is fine on a railway with standard flange size but flange depth tends to vary significantly when modelling 😊

User avatar
Melbournesparks
Cleaner
Cleaner
Posts: 42
Joined: Sat Apr 08, 2017 2:55 am
Location: City of Eltham

Re: Static points, has anybody created a working set?

Post by Melbournesparks » Wed Jun 30, 2021 10:05 am

11thHour wrote: Wed Jun 30, 2021 9:52 am
Melbournesparks wrote: Wed Jun 30, 2021 8:02 am There's a bit of a bump in the facing direction because the wheels fall into the hole where the point blade is supposed to be, but you'd fix that if you were building one like this by design.
On the 1:1 version above ( admittedly not quite what you want) there can be seen a pad for the flange to run on when transitioning. This is fine on a railway with standard flange size but flange depth tends to vary significantly when modelling 😊
Luckily for normal profile 45mm gauge wheelsets the geometry works so you don't strictly need to do that, as long as the gauge is accurate the outer part of the wheel tread engages with the stock rail before the inner part leaves the static "point blade". It is still a good method of making a smooth run through a frog though, both in modelling and full size practice.
Image

User avatar
BorisSpencer
Fireman
Fireman
Posts: 251
Joined: Thu Apr 05, 2018 2:36 pm
Location: East Northants

Re: Static points, has anybody created a working set?

Post by BorisSpencer » Wed Jun 30, 2021 5:19 pm

Thanks everyone, food for thought.
Time to bite the bullet and take the Dremel to my oldest set.

User avatar
MRail
Trainee Fireman
Trainee Fireman
Posts: 116
Joined: Mon Oct 26, 2009 4:16 pm
Location: Merseyside, UK
Contact:

Re: Static points, has anybody created a working set?

Post by MRail » Thu Jul 01, 2021 9:46 am

In my early days, around turn of century, I made extensive use of fixed points.
Most were scratch-bodged form plain track split and joined.
Before taking the Dremel to expensive points, see these pics:-
[attachment=1]MRPOINT01.jpg[/attachment]
[attachment=0]MRPOINT02.jpg[/attachment]
These were made from Tenmille track.
That seems to be my limit for posting pics.
Will try next post
Attachments
MRPOINT01.jpg
MRPOINT01.jpg (286.8 KiB) Viewed 7764 times
MRPOINT02.jpg
MRPOINT02.jpg (287.89 KiB) Viewed 7764 times
Rob G
Madog & Mersey Railway (SM32)
In my Father's roundhouse are many loco sheds.

User avatar
MRail
Trainee Fireman
Trainee Fireman
Posts: 116
Joined: Mon Oct 26, 2009 4:16 pm
Location: Merseyside, UK
Contact:

Re: Static points, has anybody created a working set?

Post by MRail » Thu Jul 01, 2021 9:48 am

These are from Peco track:-
[attachment=1]MRPOINT03.jpg[/attachment]
[attachment=0]MRPOINT04.jpg[/attachment]
Attachments
MRPOINT03.jpg
MRPOINT03.jpg (308.28 KiB) Viewed 7762 times
MRPOINT04.jpg
MRPOINT04.jpg (285.28 KiB) Viewed 7762 times
Rob G
Madog & Mersey Railway (SM32)
In my Father's roundhouse are many loco sheds.

User avatar
MRail
Trainee Fireman
Trainee Fireman
Posts: 116
Joined: Mon Oct 26, 2009 4:16 pm
Location: Merseyside, UK
Contact:

Re: Static points, has anybody created a working set?

Post by MRail » Thu Jul 01, 2021 9:53 am

Scratch built on wood sleepers, and short-lived:-
[attachment=1]MRPOINT06.jpg[/attachment]

and one from Mamod track with Peco rail for "blades":-
[attachment=0]MRPOINT05.jpg[/attachment]

These all worked well for several years.
Snags occurred when visitors felt the need to run wrong road.

Then Peco introduced their small radius points, which I fitted with return springs.
Attachments
MRPOINT06.jpg
MRPOINT06.jpg (254.29 KiB) Viewed 7762 times
MRPOINT05.jpg
MRPOINT05.jpg (256.28 KiB) Viewed 7762 times
Rob G
Madog & Mersey Railway (SM32)
In my Father's roundhouse are many loco sheds.

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: Static points, has anybody created a working set?

Post by ge_rik » Thu Jul 01, 2021 12:47 pm

Interesting there are no check rails for the frog. Is that because stock only ever trailed through the frog on the curved route?

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
DafyddElvy
Cleaner
Cleaner
Posts: 66
Joined: Wed Feb 10, 2021 8:26 pm
Location: West Lothian

Re: Static points, has anybody created a working set?

Post by DafyddElvy » Thu Jul 01, 2021 2:11 pm

On the topic of check rails for crossing, when ever I have built 7mm scale turnout I have always run stock through them with out the check rails first a few times before fitting the check rail, if they don't work reliably with out the check rail I have always work on the basis it will cause problems later at some stage.

Back on topic, I am wondering how these turnouts would work if the straight road was the trailing direction and the curved line, crossover, was the facing direction which is the scenario I could definitely see a use for them on my tramway.

David

User avatar
BorisSpencer
Fireman
Fireman
Posts: 251
Joined: Thu Apr 05, 2018 2:36 pm
Location: East Northants

Re: Static points, has anybody created a working set?

Post by BorisSpencer » Thu Jul 01, 2021 6:59 pm

Rob - That is absolutely brilliant. I assume as you created so many they proved reliable.
Studying the pictures and noting the lack of check rails, is the favoured facing road determined by which blade you have left longest?

To the people who mentioned sprung points, I use Peco points in their standard configuration at the entrance to my balloon loops and allow locomotives to switch them. The problem I found with sprung points (with the normal spring removed) is that to get them to locate firmly enough for facing travel they derail wagons about 3 wagons down the train.

This fixed idea just seemed so elegant.

User avatar
MRail
Trainee Fireman
Trainee Fireman
Posts: 116
Joined: Mon Oct 26, 2009 4:16 pm
Location: Merseyside, UK
Contact:

Re: Static points, has anybody created a working set?

Post by MRail » Thu Jul 01, 2021 8:31 pm

There wasn't much science involved!
I've always been "into" tramways, and they make much use of single blade points, with one side being left open/fixed.
Others posted some pics of this arrangement.

The idea was that in the facing direction, vehicles would take the line of least resistance, ie ​straight ahead.
As you mentioned, in trailing there was no problem.
Lack of check rails was eventually remedied, in the conventional positions.
In some cases there was a tendency to deviate from straight, so an extra check rail was placed at the heel, away from the curve.

It's all in the mists of history now!

My way of springing Peco points is to use the small spring from a floppy disk case.
More history? In most cases, the Peco cover could be fitted back over the spring.

As you can imagine, light wagons were not happy, so a good deal of ballast is used.

Most of my points are also fitted with a manual lever, pressing against the tie bar, so routes can be changed.
Rob G
Madog & Mersey Railway (SM32)
In my Father's roundhouse are many loco sheds.

User avatar
andymctractor
Trainee Driver
Trainee Driver
Posts: 704
Joined: Fri Feb 01, 2013 12:03 am
Location: Suffolk, UK
Contact:

Re: Static points, has anybody created a working set?

Post by andymctractor » Fri Jul 09, 2021 2:16 pm

It is simpler to change the rules.
Some very interesting stuff here in this topic. I see what most people are trying to achieve.
The Crowfoot Light Railway is a continuous run with long passing loops on opposite sides of the layout with island platforms inside the loops. Normally I would look to have all up trains using one side and all down trains using the other side of these platforms. However, when operating two trains only with one in each direction, provided I accept that the train entering the loop is going to enter using the road used by the previous train to exit it, I can use unaltered Peco sm32 points. I know this isn’t what most are trying to achieve but I like to keep things simple.
Regards
Andy McMahon

If it moves, salute it.  If it doesn't move, paint it. (RN sailors basic skills course 1968)

spaeker
Cleaner
Cleaner
Posts: 17
Joined: Sat Jul 24, 2021 12:20 pm

Re: Static points, has anybody created a working set?

Post by spaeker » Fri Jul 30, 2021 7:52 pm

re-opened the case with title TRAM turnouts .. didnt know topic was here

Hello MRAIL Looks like you are real TRAM fan : No I wont accept spring points

Looks to me as if real modern trams have invented a unique and ingenious way of doing this Single track to double passing point
NO moving parts. Nothing up their sleeves
From all the pics here I still dont understand how this can work How the the wheel flange is actually directed according to direction ?
Can anyone make a diagram with a picture of a real one showing hwo the flange is directed with arrows ? ( both ways )
Meantime I have written to some industrial tram companies to see if they can give guidance . Let you know if it comes up trumps I am determined to build them for my tram layout.
here is the puzzle again
Attachments
tram turn out.JPG
tram turn out.JPG (35.03 KiB) Viewed 5708 times

User avatar
MRail
Trainee Fireman
Trainee Fireman
Posts: 116
Joined: Mon Oct 26, 2009 4:16 pm
Location: Merseyside, UK
Contact:

Re: Static points, has anybody created a working set?

Post by MRail » Sat Jul 31, 2021 10:55 am

Hi chaps,
This latest diagram appears to show Y points at each end of the passing loop.
This would be conventional practice for tramways.
The system I used depends on the tram/train approaching the loop on the straight, and continuing straight ahead.
Exiting the loop is on the curve.
This format of passing loop was once known as "thrown over".
[attachment=0]OpenLoop.jpg[/attachment]

Persuading the vehicle to take the curved approach would be a challenge.
Attachments
OpenLoop.jpg
OpenLoop.jpg (33 KiB) Viewed 5672 times
Rob G
Madog & Mersey Railway (SM32)
In my Father's roundhouse are many loco sheds.

User avatar
philipy
Moderator
Moderator
Posts: 5033
Joined: Sun Jan 30, 2011 3:00 pm
Location: South Northants

Re: Static points, has anybody created a working set?

Post by philipy » Sat Jul 31, 2021 2:42 pm

I don't know if this is any help? I found an old, long, tramway track thread on RMWeb and the last page (mainly) deals with this subject.
https://www.rmweb.co.uk/community/index ... ks/page/3/

and I found a similar tread on G Scale central
https://www.gscalecentral.net/threads/n ... ts.175076/

..and finally I found a US Patent for fixed tramway points with diagram
https://www.google.co.uk/books/edition/ ... xed+points

There is a lot of info out there... Google is your friend! :D
Philip

User avatar
Melbournesparks
Cleaner
Cleaner
Posts: 42
Joined: Sat Apr 08, 2017 2:55 am
Location: City of Eltham

Re: Static points, has anybody created a working set?

Post by Melbournesparks » Sun Aug 01, 2021 8:00 pm

spaeker wrote: Fri Jul 30, 2021 7:52 pm Looks to me as if real modern trams have invented a unique and ingenious way of doing this Single track to double passing point
NO moving parts.
Which system is this? I've never seen a static set of points on a modern system before and even single bladed are rare in new construction. If you can find a picture of it (try streetview if it is in street trackage) we might be able to work out how it works.
Image

spaeker
Cleaner
Cleaner
Posts: 17
Joined: Sat Jul 24, 2021 12:20 pm

Re: Static points, has anybody created a working set?

Post by spaeker » Thu Aug 05, 2021 8:08 pm

guys thanks so much for contributions
to put this discussion to bed with a hope of a trial to model the real thing

Does anyone know / have links to/ could possibly be allowed to visit the track > recent real tramway / light rail designers To ask them the design of these special passing point track diverters


I am a newbie Wanting to make a tram layout Londoner I look at the newish real Croydon Tram link .
II look at at those trams going single track to passing point stations I cant get close enough to actually see the cross over network in detail
But there is NO hint of any track side control apparatus on these "points" Whether or not there is some moving part in them> surely doubtful.
The maintenance cost of such would surely provoke a fixed solution to send on tram one way .. Plastic drinks bottle stuck in the track etc etc

I have tried to contact modern tramway designers as my best hope to find out the truth. Sadly none have responded Can you help ?

Here is a link to the most excellent amateur documentary of that network now running . Alas the guy who researched it all has died It is very well worth a look
https://www.croydon-tramlink.co.uk/

I did make my own system added a moving flexible joint ( just one). Worked fine but this cannot be the real world solution ?
google earth doesnt come anywhere near close enough to see.
ciao spaeker

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests