Building with laser cut steel

What is your latest project?
Post Reply
User avatar
Busted Bricks
Trainee Driver
Trainee Driver
Posts: 750
Joined: Sat Jan 22, 2011 9:16 pm
Location: Denmark
Contact:

Building with laser cut steel

Post by Busted Bricks » Sat Jan 04, 2020 11:26 pm

I cut a lot of decorative items from 2mm mild steel for one of my customers. Some of the items are irregular shapes and even when nested there is a fair amount of leftover material. I thought I might as well put that to good use so at long last I've started playing around with designs that utilise the capabilities of the laser. The aim is to make a chassis where parts can be bent by hand and bolted together. No need to machine frame stretchers, thread holes etc. This is the first proof of concept I have done. The frame parts are aligned using slots and tabs. The stretchers have slots cut in them so they can be bent by hand. Works well so I'll take that idea further.
laser chassis.jpg
laser chassis.jpg (296.25 KiB) Viewed 6230 times

11thHour
Trainee Fireman
Trainee Fireman
Posts: 116
Joined: Mon Mar 26, 2012 4:00 am
Location: Wodonga, Vic. Land of Oz

Re: Building with laser cut steel

Post by 11thHour » Sun Jan 05, 2020 1:22 am

Nice start BB.
Designing for laser cut always seems so easy until you draw up the lines.
How wide is a laser cut? When you draw a hole how big should it be so it can be reamed but not oversized? How much allowance for extra length is needed for bend allowance? Assurance from the local laser man that these dimensions are ‘negligible’ is not much help. To bad we are a hemisphere away.
Tim

User avatar
Busted Bricks
Trainee Driver
Trainee Driver
Posts: 750
Joined: Sat Jan 22, 2011 9:16 pm
Location: Denmark
Contact:

Re: Building with laser cut steel

Post by Busted Bricks » Sun Jan 05, 2020 10:56 am

The cut width (kerf) varies with nozzle size, gas pressure/type, stand-off etc. but generally tolerances are within +/- 0.1mm. If I want to ream a hole to 3mm I cut it 2.7mm.

Bend allowance is more tricky - there are formulas for that. Nothing to do with the laser really. However when I cut slots to aid bending, the final width is pretty much spot on distance between center of slots + 2 X material thickness.

11thHour
Trainee Fireman
Trainee Fireman
Posts: 116
Joined: Mon Mar 26, 2012 4:00 am
Location: Wodonga, Vic. Land of Oz

Re: Building with laser cut steel

Post by 11thHour » Mon Jan 06, 2020 12:30 am

Thanks BB,
Looking forward to your progress.
Tim

User avatar
tom_tom_go
Driver
Driver
Posts: 4824
Joined: Wed Feb 23, 2011 3:08 am
Location: Kent, UK
Contact:

Re: Building with laser cut steel

Post by tom_tom_go » Mon Feb 03, 2020 6:22 pm

Do you think you are able to produce a multi height coupler like this but as a one piece unit in steel?

https://www.maidstone-engineering.com/o ... -aluminium

User avatar
Busted Bricks
Trainee Driver
Trainee Driver
Posts: 750
Joined: Sat Jan 22, 2011 9:16 pm
Location: Denmark
Contact:

Re: Building with laser cut steel

Post by Busted Bricks » Mon Feb 03, 2020 10:02 pm

No, that would require casting or 5-axis CNC machining.

User avatar
Old Man Aaron
Trainee Driver
Trainee Driver
Posts: 795
Joined: Wed Oct 19, 2016 11:08 am
Location: Sunshine Coast QLD, Australia

Re: Building with laser cut steel

Post by Old Man Aaron » Thu Mar 19, 2020 1:38 am

An intriguing use of scrap. Looking forward to see what comes of it..
Regards,
Aaron - Scum Class Works

Phil.P
Fireman
Fireman
Posts: 430
Joined: Thu Jan 31, 2019 3:28 pm
Location: Staffs. UK

Re: Building with laser cut steel

Post by Phil.P » Fri Dec 25, 2020 7:48 pm

Busted Bricks wrote: Mon Feb 03, 2020 10:02 pm No, that would require casting or 5-axis CNC machining.
On the grounds there are no stupid questions, only stupid answers..

What makes it '5-axis'?

I 'get' 3-axes - X, Y, and Z..

Phil. P

User avatar
Palmerston
Trainee Fireman
Trainee Fireman
Posts: 194
Joined: Mon Feb 02, 2009 5:56 pm
Location: Southest of The Netherlands

Re: Building with laser cut steel

Post by Palmerston » Fri Dec 25, 2020 9:25 pm

A,B are 4 and 5.

X and y can both rotate which makes it a real 3D machine. X,Y and Z is called an 2.5D

Search on Youtube for "Hermle 5 axis"
Live steam on 45 & 184mm, battery 45mm only.

Phil.P
Fireman
Fireman
Posts: 430
Joined: Thu Jan 31, 2019 3:28 pm
Location: Staffs. UK

Re: Building with laser cut steel

Post by Phil.P » Sat Dec 26, 2020 7:54 pm

Thanks..

Pity all the Technical Colleges stopped and doing night school classes on metal working and machine tools..

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests