An international forum for garden railway modellers in all scales and gauges. It is free to join and is funded through voluntary contributions by its members. Many thanks to all those who keep it going.
FWLR wrote: ↑Wed Oct 30, 2019 11:28 am
Great job on the shed Rik. The insulation you are using is what I had in the new shed I bought at, blooming heck, two address's ago. It's brilliant stuff. I had a lovely warm shed with very little heating on in the winter months, although in the summer both doors needed to be opened and the windows too...I also did the same configuration with the power supply. It is mandatory I think to have a separate consumer unit in outside building. I did the same with the lights over my workbench too...These old eyes are getting worse as the years go by....
Thanks Rod
Been working in there over the past couple of days. Got a small electric heater switchable between 600W and 1200W. After 20min I have to turn it to 600W and after an hour have to turn it off as it's too warm. Probably need the carpet for the winter though.
You are quite right about having a carpet, although at first use of my shed I just had the floorboards, there was a draft coming from the floor, so I put 9mm MDF sheet down and then got a cheap carpet from a local store and no more drafts. It was also easier on the feet..
Anne would often come down to the shed because I had lost all track of time, it was so cosy in there....
Have now more or less finished the workshop. There's still a bit more titivating to do inside, but it's now usable. In fact, I've started working again on railway related projects (painting some figures bought at Llanfair). A couple of pics of the interior.
Completely, utterly, mind blowingly superb!
The shed envy you felt, is nothing compared with mine right now - about an hour ago I was slightly nagged for using a kitchen worktop whilst a large piece of foamboard was gluing!
Superb build Rik, I would feel very comfortable working in your shed, and very much at home with the organisation of tools, equipment and accessories neatly stashed away.
You could easily start a trend here!
The best things in life are free.... so why am I doing this?
Peter Butler wrote: ↑Sat Nov 23, 2019 6:45 pm
Superb build Rik, I would feel very comfortable working in your shed, and very much at home with the organisation of tools, equipment and accessories neatly stashed away.
You could easily start a trend here!
LNR wrote: ↑Sat Nov 23, 2019 1:22 pm
I'll second what Philip said, that is one very comfortable looking work station Rik.
Grant.
Thanks chaps. That's praise indeed from two of the foremost modellers on the forum. I do like to have things organised, though when I get immersed in a project I tend to accumulate random tools and bits on the workbench - then have to have occasional a blitz tidying sessions.
But it is good to know I have a place for everything - especially when an emergency repair is required during a running session.
invicta280 wrote: ↑Sat Nov 23, 2019 1:59 pm
It's a nicer workshop than mine, and mine took me much longer than 3m 43s to build too.
Thanks. If only! I suppose it took about a month to construct and insulate the main structure, then a couple of weeks to erect the shelves and workbenches and move everything in. So about six weeks' work overall.
philipy wrote: ↑Sat Nov 23, 2019 12:17 pm
Completely, utterly, mind blowingly superb!
The shed envy you felt, is nothing compared with mine right now - about an hour ago I was slightly nagged for using a kitchen worktop whilst a large piece of foamboard was gluing!
Thanks Philip. The conservatory was a good interim position (for fifteen years), but now I feel a lot less guilty about hogging a shared space. I've discovered that our cordless phone is still within range of the workshop and so the missus can use the intercom feature to summon me for meals. Not yet had the gall to request drinks and food be brought out to me via the intercom....
ge_rik wrote: ↑Sun Nov 24, 2019 12:58 am
I do like to have things organised,
Oh! so do I Rik, except I use a layered filing principle, one layer of junk on top of another !!
I'm afraid to say I haven't seen the top of my bench in years. Instead I opened the drawers underneath and put
scrap ply on them and start again. Terrible to admit, I used to be exceptionally tidy years ago too.
PB240006.JPG (144.32 KiB) Viewed 6409 times
No Name, no pack drill!
PS can't believe I posted this photo
ge_rik wrote: ↑Sun Nov 24, 2019 12:58 am
I do like to have things organised,
Oh! so do I Rik, except I use a layered filing principle, one layer of junk on top of another !!
I'm afraid to say I haven't seen the top of my bench in years. Instead I opened the drawers underneath and put
scrap ply on them and start again. Terrible to admit, I used to be exceptionally tidy years ago too.
No Name, no pack drill!
PS can't believe I posted this photo
I believe I can detect a sense of order beneath the chaos ......
It's reassuring for the rest of us that you can produce such exquisite models without the need for a sterile environment.
Agreed Rik. My pile of junk, aka work bench, currently looks much worse than that, and I actually tidied it earlier this morning - I simply HAD to find enough space to paint a model building's front door.
Just seen your video Rik....It's another masterpiece......
Not only are you one of the top modellers on the forum,
(I put you next to Peter) on here. You are a master carpenter too. You could make an awful lot of money building them for other members.....
I am wanting a new shed myself for our new place. (I don't have a model room now.)...
Any chance of one mate....
