Done some more on the garage.
With the intended lights that will be in the garage, I have built a small power cabinet to house the battery box, it is a really easy build with the Plasticard, but unfortunately I am sorry I didn't take any photos of the build. It only took me about 15 minutes all told, this Plasticard is real quick to build anything. There is only one working switch, the rest are false. But we think it does what is needed.
- DSCN3753.JPG (476.9 KiB) Viewed 6033 times
- DSCN3751.JPG (477.36 KiB) Viewed 6033 times
The office needed a light, so I looked at interior lights, but I found them to be far to big or small. So while having my morning ablutions, I thought just came to me
The screw top off a toothpaste would be just the correct size after I cut it down a little.
- JPEG image-DDF5FD590367-1.jpeg (130.32 KiB) Viewed 6033 times
Photo is a bit fuzzy, but I hope you can see were I made the cut. I then made something to hold the lamp, I didn't have at the time anything thin enough to fix it to, so I used a short piece of 6mm tube. I heated some water and used a drill bit to help bend it enough to look like a tube that wouldn't look out of place.
- DSCN3819.JPG (471.61 KiB) Viewed 6033 times
I then fitted it to the screw top. Put a 3mm led in and tried it out to see if it looked right. It's not in it's final position..
- DSCN3820.JPG (481.71 KiB) Viewed 6033 times
- DSCN3821.JPG (474.54 KiB) Viewed 6033 times
In the office, think it works.
- DSCN3825.JPG (451.12 KiB) Viewed 6033 times
Got loads to do yet though, so I will update has I go along.