A Garage For FWLR

What is your latest project?
User avatar
tom_tom_go
Driver
Driver
Posts: 4824
Joined: Wed Feb 23, 2011 3:08 am
Location: Kent, UK
Contact:

Re: A Garage For FWLR

Post by tom_tom_go » Sat Jan 19, 2019 12:56 pm

A smoke generator in the chimney for the wood burner would be very atmospheric blowing into the cold air with those lights on.

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: A Garage For FWLR

Post by Andrew » Sat Jan 19, 2019 1:24 pm

tom_tom_go wrote: ↑Sat Jan 19, 2019 12:56 pm A smoke generator in the chimney for the wood burner would be very atmospheric blowing into the cold air with those lights on.
Great idea!

User avatar
tom_tom_go
Driver
Driver
Posts: 4824
Joined: Wed Feb 23, 2011 3:08 am
Location: Kent, UK
Contact:

Re: A Garage For FWLR

Post by tom_tom_go » Sat Jan 19, 2019 1:50 pm

If you do want to fit one Rod get one that is for model building use as if you fit one that is intended for a locomotive it will pump out too much smoke and look like the wood burner is being used to burn illegal documents!

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: A Garage For FWLR

Post by FWLR » Sun Jan 20, 2019 9:50 am

Great idea Tom, never thought about that. I am going to build a brick chimney at the back of the office, so I will need to find a cheap smoke generator so I can get some dimensions and work it in.

User avatar
BertieB
Fireman
Fireman
Posts: 363
Joined: Mon Nov 13, 2017 12:13 am
Location: London
Contact:

Re: A Garage For FWLR

Post by BertieB » Wed Jan 23, 2019 12:15 am

Andrew wrote: ↑Sat Jan 19, 2019 9:53 am Loving the lighting Rod, it looks wonderful! Those pools of light are so atmospheric, you've got it just right - it made me think of Edward Hopper...
Those of you with a busy lineside streetscape could add one of these, flashing light and all...

(There's a whole subculture of this stuff, a lot of it very well done)


Hopper / Stinglacson, Deviant Art
Hopper / Stinglacson, Deviant Art
Hopper_Tardis.jpg (129.56 KiB) Viewed 5417 times

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: A Garage For FWLR

Post by FWLR » Wed Jan 23, 2019 7:41 am

Andrew wrote: ↑Sat Jan 19, 2019 9:53 am Loving the lighting Rod, it looks wonderful! Those pools of light are so atmospheric, you've got it just right - it made me think of Edward Hopper...

Image
Thanks Andrew. It took a bit of work getting the wiring sorted, getting better at soldering in tight places.... :lol: :lol:

Enlighten me please on Edward Hopper.... :scratch:

User avatar
SimonWood
Trainee Driver
Trainee Driver
Posts: 655
Joined: Tue Apr 07, 2015 9:46 pm
Location: West Wales
Contact:

Re: A Garage For FWLR

Post by SimonWood » Wed Jan 23, 2019 9:24 am

BertieB wrote: ↑Wed Jan 23, 2019 12:15 am Those of you with a busy lineside streetscape could add one of these, flashing light and all...
I shall be adding one of those. I'm tempted by the Pendle Valley one, with optional flashing unit.

I'm not planning a busy streetscape, but I don't think that's necessary. It'll fit in anywhere in time and space.

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: A Garage For FWLR

Post by Andrew » Wed Jan 23, 2019 10:09 am

FWLR wrote: ↑Wed Jan 23, 2019 7:41 am Enlighten me please on Edward Hopper.... :scratch:
EH was an American painter in the first half of the 20th Century, lots of isolated figures looking lost and lonely in big cities etc - see https://www.edwardhopper.net/

The atmospheric pools of light you've created in your garage, and your little chap working on his own in the office made me think of his work - here's another favourite:

Image

The female figures in his paintings were always modelled by his wife, incidentally...

Cheers,

Andrew.

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: A Garage For FWLR

Post by FWLR » Thu Jan 24, 2019 9:15 am

Thank you Andrew. I like the way he uses light at different times of the day to show how it gives atmosphere to his painting. Also they are giving us an insight into how we live day by day, although the pace of life was slower in his day, I guess anyone who was to try and paint the same way now, would show us a different pace in how we live.



I like these, although there are some brilliant paintings and I don't want to turn this into an art thread. Maybe start another thread in "Off Topic".
sunlight-in-a-cafeteria.jpg
sunlight-in-a-cafeteria.jpg (11.17 KiB) Viewed 5116 times
room-in-new-york.jpg
room-in-new-york.jpg (9 KiB) Viewed 5116 times




I am not an art critic by the way.. :lol: I do like to see great paintings though.

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: A Garage For FWLR

Post by FWLR » Sun Apr 07, 2019 9:55 am

It's been sometime since I updated my thread because of things happing with me. I won't bore you with the why's. Most members know anyway.

Since doing the office, I started on the chimney. I wanted to make it out of real bricks, so I made a start, please bare in mind I never could lay bricks and the following photos will attain the way it looks like a dogs hind leg.

fullsizeoutput_120d.jpeg
fullsizeoutput_120d.jpeg (432.18 KiB) Viewed 4875 times

This is the smoke generator I used, I think it does a good job. You will notice that I also put the roof on the office. The clear corrugated sheet was also acquired from Bole Laser Craft.

DSCN3846.JPG
DSCN3846.JPG (488.69 KiB) Viewed 4875 times
DSCN3856.JPG
DSCN3856.JPG (454.32 KiB) Viewed 4875 times
DSCN3857.JPG
DSCN3857.JPG (471.7 KiB) Viewed 4875 times

I said I wasn't a brickie.... :lol: :lol:



Next was putting some guttering and downpipes on. Looking online I thought even though what I found available are extremely good. I thought because of the length of my garage it would be expensive. Funds and all that...
I started with some 5mm plastic pipe and I made a jig for them and cut in the middle of it, putting a steel ruler there to make sure they were cut fairly straight....

DSCN3799.JPG
DSCN3799.JPG (467.6 KiB) Viewed 4875 times
DSCN3800.JPG
DSCN3800.JPG (447.77 KiB) Viewed 4875 times

Anyway I won't bore you with how I made the downpipes with photos, but it was just simply putting some bigger bore pipe over the intended downpipes.

User avatar
tom_tom_go
Driver
Driver
Posts: 4824
Joined: Wed Feb 23, 2011 3:08 am
Location: Kent, UK
Contact:

Re: A Garage For FWLR

Post by tom_tom_go » Sun Apr 07, 2019 10:01 am

Video of the smoke generator running possible please?

User avatar
philipy
Moderator
Moderator
Posts: 5033
Joined: Sun Jan 30, 2011 3:00 pm
Location: South Northants

Re: A Garage For FWLR

Post by philipy » Sun Apr 07, 2019 10:16 am

FWLR wrote: ↑Sun Apr 07, 2019 9:55 am
Looking online I thought even though what I found available are extremely good. I thought because of the length of my garage it would be expensive. Funds and all that...
I started with some 5mm plastic pipe and I made a jig for them and cut in the middle of it, putting a steel ruler there to make sure they were cut fairly straight....
1/2 round styrene extrusions are available in a number of sizes and 330mm and 1000mm lengths, at a pretty reasonable price, and its a lot easier than cutting tube (with less wastage if you are anything like me!)
https://www.cornwallmodelboats.co.uk/ac ... -tube.html
Philip

User avatar
Peter Butler
Driver
Driver
Posts: 5219
Joined: Sun Sep 09, 2012 10:33 pm
Location: West Wales

Re: A Garage For FWLR

Post by Peter Butler » Sun Apr 07, 2019 10:27 am

I really like your chimney Rod, it has the appearance of age and many repairs during its years of work. Plastic tube and rod (of the plastic kind) are available in assorted sizes and large packs from China at very reasonable prices. They are useful for so many things once you have them. I have used the same process as you on my structures, cutting the tube in half in a band-saw.... possibly less hazardous than a sharp blade on a smooth surface?
The best things in life are free.... so why am I doing this?

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: A Garage For FWLR

Post by ge_rik » Sun Apr 07, 2019 10:46 am

Ingenious way of making guttering, Rod. And that chimney looks brilliant. It's going to make a mighty fine model when it all comes together.

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
Andrew
Moderator
Moderator
Posts: 3247
Joined: Tue Jul 03, 2012 1:33 pm
Location: Bristol, UK
Contact:

Re: A Garage For FWLR

Post by Andrew » Sun Apr 07, 2019 2:58 pm

I love the brickwork, it looks fantastic! Might have to give that a try sometime...The finished garage is going to look great.

Cheers,

Andrew.

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: A Garage For FWLR

Post by FWLR » Mon Apr 08, 2019 9:17 am

Sorry about not finishing the update, I got rather tired yesterday putting those photos up and writing a bit how I did things. So onwards and upwards....

The guttering and downpipes are now on. I also made a water barrel out of HIP.
This photo is of two I made and compared it against shop bought. I used the middle one, because I thought it looked right. I am not into scale really. I think if it looks right, it is.
And Anne is my inspector, :lol: :lol: So if she says it looks good, that's good enough for me.

DSCN3868.JPG
DSCN3868.JPG (477.76 KiB) Viewed 5158 times

The finished water barrel.

DSCN3937.JPG
DSCN3937.JPG (479.45 KiB) Viewed 5158 times
fullsizeoutput_150f.jpeg
fullsizeoutput_150f.jpeg (440.49 KiB) Viewed 5158 times

The garage has a multi fuel stove, so I also made a wood store. I am sorry I didn't take photos of the build, but it was pretty straight forward. Open brick store with the logs cut from twigs I had and the cover was made with HIP and the corrugated sheet.

DSCN3943.JPG
DSCN3943.JPG (475.9 KiB) Viewed 5158 times

The crack you can see was not intentional, while I was lifting it up after laying down to tidy up the base, it broke, so I had to re-grout it. Didn't realise there was a crack until I put it on the forum......... :lol: :lol:

I will put some more on the build later, I just need a little rest.. :(

User avatar
tom_tom_go
Driver
Driver
Posts: 4824
Joined: Wed Feb 23, 2011 3:08 am
Location: Kent, UK
Contact:

Re: A Garage For FWLR

Post by tom_tom_go » Mon Apr 08, 2019 9:28 am

Leave the crack, adds to the realism.

User avatar
philipy
Moderator
Moderator
Posts: 5033
Joined: Sun Jan 30, 2011 3:00 pm
Location: South Northants

Re: A Garage For FWLR

Post by philipy » Mon Apr 08, 2019 9:37 am

That really is looking good Rod. As Tom says, leave the crack alone, that is exactly what old brickwork does.

I also like the line of green along the bottom, again exactly what you'd see on an old building.
Philip

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: A Garage For FWLR

Post by FWLR » Mon Apr 08, 2019 9:40 am

philipy wrote: ↑Sun Apr 07, 2019 10:16 am
FWLR wrote: ↑Sun Apr 07, 2019 9:55 am
Looking online I thought even though what I found available are extremely good. I thought because of the length of my garage it would be expensive. Funds and all that...
I started with some 5mm plastic pipe and I made a jig for them and cut in the middle of it, putting a steel ruler there to make sure they were cut fairly straight....
1/2 round styrene extrusions are available in a number of sizes and 330mm and 1000mm lengths, at a pretty reasonable price, and its a lot easier than cutting tube (with less wastage if you are anything like me!)
https://www.cornwallmodelboats.co.uk/ac ... -tube.html
Thanks Phillip for that link. :thumbright:

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: A Garage For FWLR

Post by FWLR » Tue Apr 09, 2019 8:01 am

Few more photos of the garage,

Son-in-law wrote the sign I made. Also got the iron work on the doors.

DSCN3875.JPG
DSCN3875.JPG (451.01 KiB) Viewed 5116 times

Thought I would show Andrew this one....
DSCN3877.JPG
DSCN3877.JPG (471.66 KiB) Viewed 5116 times

Nearly finished with some extras put in...
DSCN3879.JPG
DSCN3879.JPG (446.14 KiB) Viewed 5116 times
DSCN3886.JPG
DSCN3886.JPG (450.77 KiB) Viewed 5116 times
DSCN3888.JPG
DSCN3888.JPG (452.49 KiB) Viewed 5116 times
DSCN3887.JPG
DSCN3887.JPG (437.22 KiB) Viewed 5116 times

All painted and some weathering....
DSCN3929.JPG
DSCN3929.JPG (459.2 KiB) Viewed 5116 times
DSCN3930.JPG
DSCN3930.JPG (473.23 KiB) Viewed 5116 times
DSCN3932.JPG
DSCN3932.JPG (452.03 KiB) Viewed 5116 times
DSCN3933.JPG
DSCN3933.JPG (469.79 KiB) Viewed 5116 times
The black bin is for the lights in the garage, they are LED strips I bought of eBay. They came in varying amounts on each roll. And for just over Β£1, I got 60 on the roll, so they will last me longer than my life time..... :lol: :lol:
They did however take a few weeks to arrive....

https://www.ebay.co.uk/itm/5M-300Leds-S ... xy1RZSWV8g

DSCN3934.JPG
DSCN3934.JPG (463.35 KiB) Viewed 5116 times
DSCN3935.JPG
DSCN3935.JPG (478.52 KiB) Viewed 5116 times
DSCN3936.JPG
DSCN3936.JPG (483.43 KiB) Viewed 5116 times
DSCN3937.JPG
DSCN3937.JPG (479.45 KiB) Viewed 5116 times
DSCN3938.JPG
DSCN3938.JPG (492.34 KiB) Viewed 5116 times

I have bought some door hinges for the office door and just waiting for them to arrive today hopefully. Then it's on with something Anne wanted me to do on it. Will reveal when I start to do it after our holiday next week....

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest