Peckforton sawmill

What is your latest project?
Post Reply
User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Peckforton sawmill

Post by ge_rik » Thu Jan 04, 2018 1:01 pm

Made a start over Christmas on my latest project - the sawmill at Peckforton.

I wanted to make sure the roof structure worked out OK before doing too much to the rest of the building. My interpretation of Belfast trusses - a bit over-engineered for the size of the building, but I wanted something that looked a bit different.
IMG_6939.JPG
IMG_6939.JPG (216.44 KiB) Viewed 7351 times
IMG_6938.JPG
IMG_6938.JPG (254.42 KiB) Viewed 7351 times
Next stage will be to clad the roof in corrugated iron - the drinks can donors can just be seen in the background, and then a few more coffee stirrers trimmed down to provide the workers with some protection from the elements.

Then will come the fun part of making the machinery.

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
philipy
Moderator
Moderator
Posts: 5033
Joined: Sun Jan 30, 2011 3:00 pm
Location: South Northants

Re: Peckforton sawmill

Post by philipy » Thu Jan 04, 2018 3:06 pm

Mmm, looking forward to seeing this one worked through.
What are you thinking of for the mechanics, a big steam powered belt driving a saw blade on one of those massive travelling benches, perhaps?
Philip

bazzer42
Driver
Driver
Posts: 1215
Joined: Sun Nov 25, 2012 1:37 pm
Location: Forest of Dean

Re: Peckforton sawmill

Post by bazzer42 » Thu Jan 04, 2018 3:47 pm

I like the look of that, sucker for curved roofs. :D

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: Peckforton sawmill

Post by ge_rik » Thu Jan 04, 2018 4:42 pm

philipy wrote: Thu Jan 04, 2018 3:06 pm Mmm, looking forward to seeing this one worked through.
What are you thinking of for the mechanics, a big steam powered belt driving a saw blade on one of those massive travelling benches, perhaps?
Definitely want to put in an overhead pulley system and a stationary steam engine. A large circular saw is a must plus a travelling rack bench. Not sure then whether to put in a breast bench, a bandmill or a cross-cut saw - or maybe a combination. Though I'd like to try and keep things as simple as possible (famous last words??)

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: Peckforton sawmill

Post by ge_rik » Thu Jan 04, 2018 4:45 pm

bazzer42 wrote: Thu Jan 04, 2018 3:47 pm I like the look of that, sucker for curved roofs. :D
Me too. Fascinating looking into the history of the Belfast Truss - eg https://www.google.co.uk/url?sa=t&rct=j ... 8D8pg4U8b0

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
RylstonLight
Trainee Fireman
Trainee Fireman
Posts: 209
Joined: Fri Oct 26, 2012 3:10 pm
Location: Pontefract West Yorkshire

Re: Peckforton sawmill

Post by RylstonLight » Thu Jan 04, 2018 5:04 pm

Looking good
Andy S. at the Rylston Light Railway

User avatar
Soar Valley Light
Driver
Driver
Posts: 1451
Joined: Sun Dec 08, 2013 5:18 pm
Location: North West Leicestershire

Re: Peckforton sawmill

Post by Soar Valley Light » Thu Jan 04, 2018 5:50 pm

Hello Rik,

That's a really nice job. It's a really interesting piece of work and I'm looking forward to watching it develop.

Andrew
"Smith! Why do you only come to work four days a week?
"'cause I can't manage on three gaffer!"

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: Peckforton sawmill

Post by ge_rik » Thu Jan 04, 2018 6:11 pm

Thanks chaps. This has taken a while to come to fruition. Did a fair bit of research first and very much feeling my way with a new construction technique. But then, I suppose most of us are doing stuff for the first time. I think that's one of the things which makes this hobby so fascinating.

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
tom_tom_go
Driver
Driver
Posts: 4824
Joined: Wed Feb 23, 2011 3:08 am
Location: Kent, UK
Contact:

Re: Peckforton sawmill

Post by tom_tom_go » Thu Jan 04, 2018 9:44 pm

That is quite a building Rik so far, how big is it?

User avatar
LNR
Driver
Driver
Posts: 1533
Joined: Sat Feb 27, 2016 5:26 am
Location: Australia

Re: Peckforton sawmill

Post by LNR » Thu Jan 04, 2018 10:33 pm

Certainly a lot more formal than an Australian Mill, building one truss must have been fun, x8 :shock:
Watching with interest.
Grant.

User avatar
IrishPeter
Driver
Driver
Posts: 1400
Joined: Wed Feb 23, 2011 3:24 am
Location: 'Boro, VA

Re: Peckforton sawmill

Post by IrishPeter » Fri Jan 05, 2018 3:31 am

Well, I have lornt summat there! I have seen Belfast trusses before, but never really thought about what they were.

Thank you,
Peter in Va.
ge_rik wrote: Thu Jan 04, 2018 4:45 pm
bazzer42 wrote: Thu Jan 04, 2018 3:47 pm I like the look of that, sucker for curved roofs. :D
Me too. Fascinating looking into the history of the Belfast Truss - eg https://www.google.co.uk/url?sa=t&rct=j ... 8D8pg4U8b0

Rik
Traffic Pattern? What pattern? Spuds out; grain in, but cattle, sheep and passengers are a lot less predictable.

User avatar
pandsrowe
Trainee Fireman
Trainee Fireman
Posts: 246
Joined: Sat Dec 20, 2014 12:15 pm
Location: West Norfolk, UK

Re: Peckforton sawmill

Post by pandsrowe » Fri Jan 05, 2018 8:30 am

That's really quite a feat of engineering that you creating there, reminds me of some of the aircraft hangers at Duxford that are still used for storage and restoration. Did you curve the top members or cut them from sheet? Either way another remarkable creation.
Phil

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: Peckforton sawmill

Post by ge_rik » Fri Jan 05, 2018 8:43 am

tom_tom_go wrote: Thu Jan 04, 2018 9:44 pm That is quite a building Rik so far, how big is it?
Hi Tom
Quite small, 285mm x 510mmm. Hence the comment about over engineering. It was the largest I could squeeze into the available space, leaving room for a timber gantry for unloading wagons.

Rik
Last edited by ge_rik on Fri Jan 05, 2018 8:56 am, edited 1 time in total.
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: Peckforton sawmill

Post by ge_rik » Fri Jan 05, 2018 8:45 am

pandsrowe wrote: Fri Jan 05, 2018 8:30 am That's really quite a feat of engineering that you creating there, reminds me of some of the aircraft hangers at Duxford that are still used for storage and restoration. Did you curve the top members or cut them from sheet? Either way another remarkable creation.
Hi Phil
Yes, the Duxford hangers use Belfast Trusses. The curved members are cut from thin ply (very shakily).
IMG_6880.JPG
IMG_6880.JPG (103.42 KiB) Viewed 7273 times
Coffee stirrers are then glued on following a pattern I worked out from a picture of a truss.
IMG_6885.JPG
IMG_6885.JPG (100.85 KiB) Viewed 7273 times
Once all the struts are in position,
IMG_6890.JPG
IMG_6890.JPG (98.53 KiB) Viewed 7273 times
Another curved beam and flat beam are glued on top to make a sandwich
IMG_6892.JPG
IMG_6892.JPG (138.69 KiB) Viewed 7273 times
I'm afraid my fret-sawing skills ain't wot they used to be.

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
Lonsdaler
Driver
Driver
Posts: 1226
Joined: Tue May 20, 2014 9:50 am
Location: North Yorkshire

Re: Peckforton sawmill

Post by Lonsdaler » Fri Jan 05, 2018 9:53 am

More lovely work Rik.
Just make sure that once the building is commissioned, that all the staff have a fire safety briefing. :shock: When I was a young fireman, all the buildings on our patch with a belfast roof (there were only three, actually) were listed as risks. It's not because the construction is in itself a particular fire risk, but because in a well developed fire, the roofs were prone to rapid failure, as the open lattice structure would rapidly become involved in the fire, in much the same way as a 'crib' of kindling does when you light a fire. Definitely buildings where you kept one eye on the exit.
Phil

Sporadic Garden Railer who's inconsistencies know no bounds

My Line - https://gardenrails.org/forum/viewtopic ... 41&t=11077

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: Peckforton sawmill

Post by ge_rik » Fri Jan 05, 2018 6:08 pm

Lonsdaler wrote: Fri Jan 05, 2018 9:53 am More lovely work Rik.
Just make sure that once the building is commissioned, that all the staff have a fire safety briefing. :shock: When I was a young fireman, all the buildings on our patch with a belfast roof (there were only three, actually) were listed as risks. It's not because the construction is in itself a particular fire risk, but because in a well developed fire, the roofs were prone to rapid failure, as the open lattice structure would rapidly become involved in the fire, in much the same way as a 'crib' of kindling does when you light a fire. Definitely buildings where you kept one eye on the exit.
Scary stuff. The building will have a fairly open structure and so staff will have plenty of escape routes. I don't think I'll be trying any fire tests.....

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

Big Jim
Moderator
Moderator
Posts: 2694
Joined: Sat Jul 06, 2013 5:28 pm
Location: Near Llanelli

Re: Peckforton sawmill

Post by Big Jim » Fri Jan 05, 2018 6:48 pm

Nice job Rik, ip engineering do a white metal kit of an engine that may be suitable as a power plant.
If at first you don't succeed, use a bigger hammer!

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: Peckforton sawmill

Post by ge_rik » Fri Jan 05, 2018 8:43 pm

Big Jim wrote: Fri Jan 05, 2018 6:48 pm Nice job Rik, ip engineering do a white metal kit of an engine that may be suitable as a power plant.
Thanks Jim. Looks like a nice piece of kit and it can be motorised, which is a bonus. I've got a plastic kit of a stationary engine which I might investigate first.

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
CVLR
Cleaner
Cleaner
Posts: 68
Joined: Mon Oct 16, 2017 4:48 pm
Location: West Dorset
Contact:

Re: Peckforton sawmill

Post by CVLR » Fri Jan 05, 2018 8:54 pm

Looking good. I assume we can look forward to YouTube video when it's in situ?
What's this button do then? ooops.....

User avatar
LNR
Driver
Driver
Posts: 1533
Joined: Sat Feb 27, 2016 5:26 am
Location: Australia

Re: Peckforton sawmill

Post by LNR » Fri Jan 05, 2018 11:38 pm

Jumping ahead a bit, circular saw sounds would be a nice effect (hint hint ;) ) something which would be right up your alley I imagine Rik.
Grant.

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests