Peckforton sawmill

What is your latest project?
User avatar
IanC
Trainee Driver
Trainee Driver
Posts: 798
Joined: Mon Feb 15, 2016 9:15 am
Location: Nr. Warrington, Cheshire

Re: Peckforton sawmill

Post by IanC » Mon May 21, 2018 4:29 pm

Rik,

I am not a purist. Nor do I know what a sawmill looks like, but it all looks superb. Well done.

Your attention to detail is commendable.

The finished sawmill, ancilliary buildings and fittings etc, will look fantastic.

I'd be happy if I could build models half as good as you have acheived.

Ian
Ian

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: Peckforton sawmill

Post by ge_rik » Mon May 21, 2018 4:39 pm

Gralyn wrote: Mon May 21, 2018 3:31 pm This may be a strange question considering all the superb machinery you have modelled.
??? How do you keep the Sawdust in place. I cant even keep gravel ballast from spiriting
itself away.
Lashings of PVA

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: Peckforton sawmill

Post by ge_rik » Mon May 21, 2018 4:42 pm

IanC wrote: Mon May 21, 2018 4:29 pm Rik,
I am not a purist. Nor do I know what a sawmill looks like, but it all looks superb. Well done.
Ian
Thanks Ian
I certainly don't think it's skill on my part, just dogged persistence..... :?
There are some very highly skilled modellers on this forum whose models are far more accomplished. I like to think of myself as 'Everyman' - ie if I can do it, then anyone can.

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

bazzer42
Driver
Driver
Posts: 1215
Joined: Sun Nov 25, 2012 1:37 pm
Location: Forest of Dean

Re: Peckforton sawmill

Post by bazzer42 » Mon May 21, 2018 6:09 pm

That is a beautiful interior Rik, a superb bit of modelling. I couldn't tell a belt was fouling anything and the sawdust looks just right to my eyes, accumulating where you would expect it. The site I have for a mill may have to become a cutwood store as area is nowhere near big enough...the saw will have to be off stage.

User avatar
philipy
Moderator
Moderator
Posts: 5033
Joined: Sun Jan 30, 2011 3:00 pm
Location: South Northants

Re: Peckforton sawmill

Post by philipy » Mon May 21, 2018 6:17 pm

That is phenominal Rik! Absolutely beautiful job, and I can't believe those are 'my' pulleys, you've worked them up so well. :shock:
Philip

User avatar
Soar Valley Light
Driver
Driver
Posts: 1451
Joined: Sun Dec 08, 2013 5:18 pm
Location: North West Leicestershire

Re: Peckforton sawmill

Post by Soar Valley Light » Mon May 21, 2018 6:55 pm

Good grief Rik, I fancy I can even SMELL it! :shock:

Superb work again, possibly your best yet. You do set the bar high for the rest of us! :?

:thumbright:

Andrew
"Smith! Why do you only come to work four days a week?
"'cause I can't manage on three gaffer!"

User avatar
Lonsdaler
Driver
Driver
Posts: 1226
Joined: Tue May 20, 2014 9:50 am
Location: North Yorkshire

Re: Peckforton sawmill

Post by Lonsdaler » Mon May 21, 2018 7:10 pm

I can only echo everyone else's comments Rik. I dare say someone who works or worked in a timber mill would see any inaccuracies, but to my eye it's a busy workplace, and that is the effect you wanted I think. Brilliant stuff again! :thumbup:
Phil

Sporadic Garden Railer who's inconsistencies know no bounds

My Line - https://gardenrails.org/forum/viewtopic ... 41&t=11077

User avatar
markoteal
Trainee Driver
Trainee Driver
Posts: 763
Joined: Mon Apr 18, 2016 6:23 pm
Location: Yorkshire

Re: Peckforton sawmill

Post by markoteal » Mon May 21, 2018 10:02 pm

Yes - fantastic - the building, the fittings and how you have staged the people that bring the scene alive
Where did I put that uncoupler?

jim@NAL
Driver
Driver
Posts: 1115
Joined: Sun Sep 23, 2012 11:01 am
Location: haverhill suffok

Re: Peckforton sawmill

Post by jim@NAL » Mon May 21, 2018 10:22 pm

I'm a carpenter iv seen a few saw mills there used to be one not far from where I used too live. That is spot on looks fantastic and looks like it would work well done love it

jim@NAL
Driver
Driver
Posts: 1115
Joined: Sun Sep 23, 2012 11:01 am
Location: haverhill suffok

Re: Peckforton sawmill

Post by jim@NAL » Mon May 21, 2018 10:25 pm

I'm a carpenter iv seen a few saw mills there used to be one not far from where I used too live. That is spot on looks fantastic and looks like it would work well done love it

User avatar
Peter Butler
Driver
Driver
Posts: 5219
Joined: Sun Sep 09, 2012 10:33 pm
Location: West Wales

Re: Peckforton sawmill

Post by Peter Butler » Mon May 21, 2018 10:30 pm

Sorry, late to the party....again.... but what a superb piece of model making. I agree with all of the above, it looks just as though the machinery could actually do its job. I have seen several woodworking shops in the flesh and this could easily be one of them. Apart from the line-shafting the machinery probably hasn't altered much in the intervening years.
I love the atmosphere you have created with the sawdust..... with the roof on and shadows forming from sunlight passing through the open sides it will be spot on.
The best things in life are free.... so why am I doing this?

User avatar
LNR
Driver
Driver
Posts: 1533
Joined: Sat Feb 27, 2016 5:26 am
Location: Australia

Re: Peckforton sawmill

Post by LNR » Tue May 22, 2018 2:48 am

I too agree with all that has been said, a fantastic job and it all looks so right. I'm particularly taken with the sawdust, its placement so very typical, and its application I imagine quite time consuming. Interested in what you have used for the belting, as that too looks very realistic.
Pity a roof will cover it all! Did they have skylights I wonder.
Grant.

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: Peckforton sawmill

Post by ge_rik » Tue May 22, 2018 5:59 am

LNR wrote: Tue May 22, 2018 2:48 am I too agree with all that has been said, a fantastic job and it all looks so right. I'm particularly taken with the sawdust, its placement so very typical, and its application I imagine quite time consuming. Interested in what you have used for the belting, as that too looks very realistic.
Pity a roof will cover it all! Did they have skylights I wonder.
Grant.
Thanks Grant.
With the sawdust, I assumed it would accumulate in nooks and crannies which were not thoroughfares, ie the staff would only sweep when and where necessary (or am I attributing them with my own values?).

Took me a while to seek out something for the belts. In the end, I went for thin card, painted with acrylics.

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: Peckforton sawmill

Post by ge_rik » Tue May 22, 2018 6:06 am

Thanks for the feedback, folks. As it will only be glimpsed through the sides once the roof goes on, I've used a bit of modellers' licence here and there. I'm wondering whether to instal some (dim) lighting. From photos, sawmills of the era seemed to be quite gloomy - though actually, I found it difficult to find images from the 1930s, and especially from the UK. Quite a few photos from Australia and Canada - then I suppose logging was much more prevalent there.

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: Peckforton sawmill

Post by ge_rik » Tue May 22, 2018 6:09 am

Peter Butler wrote: Mon May 21, 2018 10:30 pm I love the atmosphere you have created with the sawdust..... with the roof on and shadows forming from sunlight passing through the open sides it will be spot on.
Thanks Peter. Just the impression I'm seeking to create. :)

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: Peckforton sawmill

Post by FWLR » Tue May 22, 2018 9:05 am

ge_rik wrote: Tue May 22, 2018 6:09 am
Peter Butler wrote: Mon May 21, 2018 10:30 pm I love the atmosphere you have created with the sawdust..... with the roof on and shadows forming from sunlight passing through the open sides it will be spot on.
Thanks Peter. Just the impression I'm seeking to create. :)

Rik
Two of the best Modellers on the forum here. Peter and Rik.

Love all of the work you have done on the sawmill Rik, just superb :thumbleft: :thumbleft: :thumbleft:

Don’t want to show my effort of the crane on a wagon now. :mrgreen: :mrgreen:

User avatar
pandsrowe
Trainee Fireman
Trainee Fireman
Posts: 246
Joined: Sat Dec 20, 2014 12:15 pm
Location: West Norfolk, UK

Re: Peckforton sawmill

Post by pandsrowe » Tue May 22, 2018 9:20 am

There's not much else I can add to everyone else's comments and praise, you really have excelled yourself this time Rik. You have put so much effort into creating just the right balance of detail and realism, to hell with what the purists may say. It is a shame that so much of it won't be seen once the roof is on and presumably from a normal viewing position but as you say, 'you know'.
Phil

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: Peckforton sawmill

Post by ge_rik » Tue May 22, 2018 12:03 pm

pandsrowe wrote: Tue May 22, 2018 9:20 am It is a shame that so much of it won't be seen once the roof is on and presumably from a normal viewing position but as you say, 'you know'.
Thanks Phil
I'm thinking of installing some lighting so the interior might be a bit more visible. But as you say, I'll know it's there. :)

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: Peckforton sawmill

Post by FWLR » Tue May 22, 2018 12:05 pm

That would be really effective Rik. Go on you know you want to do it. :thumbright: :thumbright:

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: Peckforton sawmill

Post by ge_rik » Sat May 26, 2018 3:55 pm

Latest progress
I've been steadily slogging away at sorting out the gantry crane for the sawmill - and here's where I'm up to ......

The main components of the crane are now in place and (thank goodness) it seems to fit the intended site.
IMG_7764.JPG
IMG_7764.JPG (144.63 KiB) Viewed 5219 times

I've made a start on landscaping the area to accommodate the new structure. A bit of fine tuning now required to make sure all the legs actually touch the ground! :?
IMG_7766.JPG
IMG_7766.JPG (155.44 KiB) Viewed 5219 times

The design was drawn from some images on the web - though (as always) trying to make something appropriate for the 1930s requires a certain amount of reverse thinking. Mine is manually powered rather than electrically (or hydraulically) driven - from a time when manpower was relatively cheap.
IMG_7769.JPG
IMG_7769.JPG (140.96 KiB) Viewed 5219 times

As always, there is plenty still to do - the trackway for the saw trolley needs to be extended outwards and some sort of loading dock will be built to hold the logs. My first attempt at making a scissor grab for the logs was OK, but too small. And of course it all needs painting and weathering - as does the surrounding landscape. Oh, and I also need to make a boiler house and coal store!
IMG_7771.JPG
IMG_7771.JPG (148.19 KiB) Viewed 5219 times

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests