Finishing the unfinished

What is your latest project?
User avatar
Lonsdaler
Driver
Driver
Posts: 1226
Joined: Tue May 20, 2014 9:50 am
Location: North Yorkshire

Re: Finishing the unfinished

Post by Lonsdaler » Wed Jan 03, 2018 10:40 am

Lovely work. I use a longer version of there narrow box to hold my steamy bits'n'bobs in, and have often wondered if it could make a useful wagon. Now I know (in the right hands, anyway!) :D
Phil

Sporadic Garden Railer who's inconsistencies know no bounds

My Line - https://gardenrails.org/forum/viewtopic ... 41&t=11077

User avatar
RylstonLight
Trainee Fireman
Trainee Fireman
Posts: 209
Joined: Fri Oct 26, 2012 3:10 pm
Location: Pontefract West Yorkshire

Re: Finishing the unfinished

Post by RylstonLight » Wed Jan 03, 2018 7:36 pm

LNR wrote: ↑Wed Jan 03, 2018 2:58 am The camera certainly sees a lot the "objective" eye fails to notice.
Grant.
Especially in the garden, the number of good shots I have ruined by not noticing a bright red wheelbarrow wheel in the mid-distance that draws the eye to it.
The Rylston Light is between incarnations, and I was planning the next version so that scenes "fall into" themselves to minimise real world parts of the garden intruding. It will have to be seen if it ever achieves the intent.
Andy S. at the Rylston Light Railway

User avatar
RylstonLight
Trainee Fireman
Trainee Fireman
Posts: 209
Joined: Fri Oct 26, 2012 3:10 pm
Location: Pontefract West Yorkshire

Re: Finishing the unfinished

Post by RylstonLight » Wed Jan 03, 2018 7:46 pm

AND continuing the Lister project:

I managed to get several short runs in the (1:1) workshop that allowed me to "machine" out the void behind the new grill. Done with sequential drilling up to 10mm with electric hand drill, then use of handheld mini-drill (predates Dremel but same principle) with a ball mill.

As you can see pretty crude:
Lister void.png
Lister void.png (361.91 KiB) Viewed 6549 times

But when the grill is placed lightly up against the void the irregular edges are hidden:
Lister void offer.png
Lister void offer.png (378.16 KiB) Viewed 6549 times

And then next step will be spraying the raw metal, but not with today's weather. The rest of the afternoon was devoted to small repair jobs and my rolling programme of adding tare weight markings to rolling stock (interspersed with the odd nap!).
Andy S. at the Rylston Light Railway

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: Finishing the unfinished

Post by FWLR » Thu Jan 04, 2018 6:15 am

I have a nap or two every day... :lol: :lol: :lol:

User avatar
RylstonLight
Trainee Fireman
Trainee Fireman
Posts: 209
Joined: Fri Oct 26, 2012 3:10 pm
Location: Pontefract West Yorkshire

Re: Finishing the unfinished

Post by RylstonLight » Thu Jan 04, 2018 5:18 pm

Lister project continues:

This may get mired again as Big Jim has made me think again. RC size has greatly improved since the project stalled last time. Thanks Jim for link to Boaz project.

However there was some progress on painting until the wind got up again. It was finally finished as light was failing.

Tony, the Lister Renovation Project co-ordinator, stood back to admire the paint job after he'd lovingly applied the last brush-stroke. He insists that careful research showed that this was the nearest match to Lister green. The CME came across from the running shed and stood a full minute before gulping and walking back out to the twilight without a word. Old Tom muttered something about it "maybe be even more in yer face in 'daylight", with a definite impish smile. Hard to tell under the incandescent lights.

Lister green.png
Lister green.png (353.28 KiB) Viewed 6511 times

Still progress has been made.
Andy S. at the Rylston Light Railway

User avatar
LNR
Driver
Driver
Posts: 1533
Joined: Sat Feb 27, 2016 5:26 am
Location: Australia

Re: Finishing the unfinished

Post by LNR » Thu Jan 04, 2018 10:21 pm

Just wonderful.
Grant.

User avatar
tom_tom_go
Driver
Driver
Posts: 4824
Joined: Wed Feb 23, 2011 3:08 am
Location: Kent, UK
Contact:

Re: Finishing the unfinished

Post by tom_tom_go » Fri Jan 05, 2018 8:21 am

Can I have one of those workshops 1:1 scale please?

User avatar
philipy
Moderator
Moderator
Posts: 5033
Joined: Sun Jan 30, 2011 3:00 pm
Location: South Northants

Re: Finishing the unfinished

Post by philipy » Fri Jan 05, 2018 9:18 am

tom_tom_go wrote: ↑Fri Jan 05, 2018 8:21 am Can I have one of those workshops 1:1 scale please?
Personally I'd settle for one at 1:19 !! It really is a work of art in it's own right.
Philip

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: Finishing the unfinished

Post by FWLR » Fri Jan 05, 2018 10:19 am

philipy wrote: ↑Fri Jan 05, 2018 9:18 am
tom_tom_go wrote: ↑Fri Jan 05, 2018 8:21 am Can I have one of those workshops 1:1 scale please?
Personally I'd settle for one at 1:19 !! It really is a work of art in it's own right.
So would I in any scale.... :thumbright:

Agree with Phillip.... :thumbright:

User avatar
River Lin
Fireman
Fireman
Posts: 410
Joined: Wed Dec 11, 2013 8:40 pm
Location: Leicester

Re: Finishing the unfinished

Post by River Lin » Fri Jan 05, 2018 11:21 am

A-ma-zing.
D.
David T.

Big Jim
Moderator
Moderator
Posts: 2694
Joined: Sat Jul 06, 2013 5:28 pm
Location: Near Llanelli

Re: Finishing the unfinished

Post by Big Jim » Fri Jan 05, 2018 12:35 pm

You can almost smell the grease and oil fumes in the air.
If at first you don't succeed, use a bigger hammer!

User avatar
ge_rik
Administrator
Administrator
Posts: 6497
Joined: Sun Oct 25, 2009 10:20 pm
Location: Cheshire
Contact:

Re: Finishing the unfinished

Post by ge_rik » Fri Jan 05, 2018 1:36 pm

River Lin wrote: ↑Fri Jan 05, 2018 11:21 am A-ma-zing.
D.
Couldn't have put it better myself...... :thumbleft:

Rik
------------------------
Peckforton Light Railway - Blog Facebook Youtube

User avatar
RylstonLight
Trainee Fireman
Trainee Fireman
Posts: 209
Joined: Fri Oct 26, 2012 3:10 pm
Location: Pontefract West Yorkshire

Re: Finishing the unfinished

Post by RylstonLight » Fri Jan 05, 2018 3:53 pm

Thanks everyone

The Lister project continues with a look at the livery in daylight. As you can see it looks better for matting down and some light weathering.

Lister reflection.png
Lister reflection.png (477.33 KiB) Viewed 6389 times

A slightly elevated view allows a comparison of weathering techniques. I find weathering where the surface is worn away (eg the footplate wear where the driver's feet sit) is best achieved by literally wearing it down with light wet and dry to reveal the previous layer. However I find built-up weathering ( eg the grime in corners of the frames or the rust on the grill) is best with building up by layers of paints powders and dyes. An overall light spray of ModelMates weathering dye (rust) gives a patina of use. I did like the oil colour (it really looked like a oil-water separation effect) but have run out and the company is no more. If anyone knows of similar products I would be grateful for the heads-up.

Lister from above.png
Lister from above.png (477.46 KiB) Viewed 6389 times

There will be a slight hiatus on this project as after Big Jim's temptation, I am researching small RC receivers and Li-lo batteries. Mmmmm.

And as an aside did the Lister make it out into the yard under its own steam? One answer:

WD40.png
WD40.png (386.95 KiB) Viewed 6389 times
Andy S. at the Rylston Light Railway

Big Jim
Moderator
Moderator
Posts: 2694
Joined: Sat Jul 06, 2013 5:28 pm
Location: Near Llanelli

Re: Finishing the unfinished

Post by Big Jim » Fri Jan 05, 2018 4:12 pm

What, no easy-start?

Have you tried the Humbrol range of weathering washes?
If at first you don't succeed, use a bigger hammer!

User avatar
RylstonLight
Trainee Fireman
Trainee Fireman
Posts: 209
Joined: Fri Oct 26, 2012 3:10 pm
Location: Pontefract West Yorkshire

Re: Finishing the unfinished

Post by RylstonLight » Fri Jan 05, 2018 4:22 pm

Big Jim wrote: ↑Fri Jan 05, 2018 4:12 pm What, no easy-start?

Have you tried the Humbrol range of weathering washes?
Looked at them with uncertainty, but saved from the decision by the sheer amount of empty spaces on the rack!
Andy S. at the Rylston Light Railway

User avatar
RylstonLight
Trainee Fireman
Trainee Fireman
Posts: 209
Joined: Fri Oct 26, 2012 3:10 pm
Location: Pontefract West Yorkshire

Re: Finishing the unfinished

Post by RylstonLight » Fri Jan 05, 2018 4:26 pm

One from the archives. This was the Lister in April 2002. Horrid livery and dodgy weathering, but there really wasn't the same returns when searching on the internet for Lister images. Funny how you don't think your modelling or photography skills improve until you see an old image. All the rolling stock is still exists in use in some form.

2002 Lister.png
2002 Lister.png (479.32 KiB) Viewed 6410 times
Andy S. at the Rylston Light Railway

Big Jim
Moderator
Moderator
Posts: 2694
Joined: Sat Jul 06, 2013 5:28 pm
Location: Near Llanelli

Re: Finishing the unfinished

Post by Big Jim » Fri Jan 05, 2018 4:40 pm

I have had mixed experiences with them. It is worth looking at the tutorials that humbrol have published on YouTube on how they work.
If at first you don't succeed, use a bigger hammer!

User avatar
RylstonLight
Trainee Fireman
Trainee Fireman
Posts: 209
Joined: Fri Oct 26, 2012 3:10 pm
Location: Pontefract West Yorkshire

Re: Finishing the unfinished

Post by RylstonLight » Fri Jan 05, 2018 4:47 pm

Thanks for the tip, I will
Andy S. at the Rylston Light Railway

User avatar
LNR
Driver
Driver
Posts: 1533
Joined: Sat Feb 27, 2016 5:26 am
Location: Australia

Re: Finishing the unfinished

Post by LNR » Sat Jan 06, 2018 12:11 am

I was hoping Tony would take the Lister out and get it a little grimed up.
I too like polishing steel handrails, steps, running boards etc. to show constant wear, was wondering have you tried the paint and chip method using Maskol. Certainly not my idea (copied from Chuck Done on an American forum, worth looking up!) Strip the object to bare metal, apply the Maskol with a sharp tooth pick where chips and scuffing would appear, then spray or brush paint. When dry and hard, pick the Maskol off leaving a chip back to bare metal. I used it on the tractor in the pic. below.
No Guards 3.JPG
No Guards 3.JPG (45.12 KiB) Viewed 6400 times
For oil and grease grime I add talcum powder to the brush, mixed with the paint and stippled to give depth. A very dark brown to almost black colour, followed by some gloss varnish to give a wet appearance as in the oil filler and steering rod ends.
No Guards 1.jpg
No Guards 1.jpg (65.3 KiB) Viewed 6400 times
Grant.

User avatar
FWLR
Driver
Driver
Posts: 4262
Joined: Sat Aug 05, 2017 9:45 am
Location: Preston, Lancashire, UK

Re: Finishing the unfinished

Post by FWLR » Sat Jan 06, 2018 7:47 am

Wow Grant that is very very good. Looks just like the real thing.... :thumbright: :thumbright:

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests