What is your latest project?
-
bazzer42
- Driver
- Posts: 1215
- Joined: Sun Nov 25, 2012 1:37 pm
- Location: Forest of Dean
Post
by bazzer42 » Fri Sep 29, 2017 12:27 pm
- 15066838854601294645.jpg (1.47 MiB) Viewed 5914 times
- 150668400562193136216.jpg (1.45 MiB) Viewed 5914 times
I will probably stop here on build one. Too damp to run but propels through lgb r3 points with no problems. The weight is 160 gm v 185 gm of my resin builds and quite surprised at that, and pleased. There is a bit of wobble with the tipper body being loose fitted but a little weight in the bottom cures that.
Now for number 2...or 23 as it will be in the fleet.
-
bazzer42
- Driver
- Posts: 1215
- Joined: Sun Nov 25, 2012 1:37 pm
- Location: Forest of Dean
Post
by bazzer42 » Sun Oct 08, 2017 8:45 am
- 15074483356481501104589.jpg (737.74 KiB) Viewed 5870 times
- 15074484607671237322322.jpg (779.62 KiB) Viewed 5870 times
Build 2 is going to be a wagon I've been hankering to do for a while. Bulkhead ends and removable side planks depending on the load. Added some end rods to the tipper supports from 2.4mm rivets dipped in blackening liquid. A fiddle to do and need to fill in around the tipper supports where my drilling got a little enthusiastic.
-
tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
-
Contact:
Post
by tom_tom_go » Sun Oct 08, 2017 9:14 am
Great work.
Do you want to finish mine as I am no where near finished!
-
FWLR
- Driver
- Posts: 4290
- Joined: Sat Aug 05, 2017 9:45 am
- Location: Preston, Lancashire, UK
Post
by FWLR » Tue Oct 10, 2017 6:44 am
Brilliant Derek.
-
bazzer42
- Driver
- Posts: 1215
- Joined: Sun Nov 25, 2012 1:37 pm
- Location: Forest of Dean
Post
by bazzer42 » Tue Oct 10, 2017 9:01 pm
- 15076655198111165296814.jpg (795.74 KiB) Viewed 5749 times
- 15076654394991447717633.jpg (807.96 KiB) Viewed 5749 times
Slowly but surely Michael. Need to add some rivets behind the boards and the metal runners ( brass channel) but getting close..
-
tom_tom_go
- Driver
- Posts: 4824
- Joined: Wed Feb 23, 2011 3:08 am
- Location: Kent, UK
-
Contact:
Post
by tom_tom_go » Wed Oct 11, 2017 8:21 am
Simple and it works.
My kind of modelling!
-
FWLR
- Driver
- Posts: 4290
- Joined: Sat Aug 05, 2017 9:45 am
- Location: Preston, Lancashire, UK
Post
by FWLR » Wed Oct 11, 2017 8:25 am
Where do you get your ideas from, they are brilliant.
-
philipy
- Moderator
- Posts: 5098
- Joined: Sun Jan 30, 2011 3:00 pm
- Location: South Northants
Post
by philipy » Wed Oct 11, 2017 8:38 am
Very nice Derek. Really quirky, which works for me!
Philip
-
bazzer42
- Driver
- Posts: 1215
- Joined: Sun Nov 25, 2012 1:37 pm
- Location: Forest of Dean
Post
by bazzer42 » Wed Oct 11, 2017 1:01 pm
FWLR wrote: βWed Oct 11, 2017 8:25 am
Where do you get your ideas from, they are brilliant.
Inspiration for this was an article in Garden Rail 189, just went taller.
If I could choose my own epitaph it might well be simple and quirky!
Thanks for the kind comments, wondering if I can manufacture 12 square nuts from styrene strip for the securing bolts for this evening. Simple, quirky and as tight as a ducks bottom...not sure the masons will carve that last bit
-
Busted Bricks
- Trainee Driver
- Posts: 750
- Joined: Sat Jan 22, 2011 9:16 pm
- Location: Denmark
-
Contact:
Post
by Busted Bricks » Wed Oct 11, 2017 1:53 pm
They look fantastic. I'm always impressed with what a talented person can bash a simple kit into
-
FWLR
- Driver
- Posts: 4290
- Joined: Sat Aug 05, 2017 9:45 am
- Location: Preston, Lancashire, UK
Post
by FWLR » Thu Oct 12, 2017 5:49 am
bazzer42 wrote: βWed Oct 11, 2017 1:01 pm
FWLR wrote: βWed Oct 11, 2017 8:25 am
Where do you get your ideas from, they are brilliant.
.... wondering if I can manufacture 12 square nuts from styrene strip for the securing bolts for this evening.
Simple, quirky and as tight as a ducks bottom...not sure the masons will carve that last bit
Might be a good idea to cut them with a cloth so has to keep them from shooting off into the distance
Very funny with the ducks bottom......thats made my morning.
-
bazzer42
- Driver
- Posts: 1215
- Joined: Sun Nov 25, 2012 1:37 pm
- Location: Forest of Dean
Post
by bazzer42 » Sat Oct 14, 2017 8:00 pm
- 15080073549401925950258.jpg (767.59 KiB) Viewed 5635 times
- 15080073100301209258433.jpg (827.06 KiB) Viewed 5635 times
Stage one weathering reached . Nail art rivets to hold the runners and 10ba bolts to secure the vertical bulkheads. Hopefully we'll get there tomorrow and then think about kit 3.
-
LNR
- Driver
- Posts: 1542
- Joined: Sat Feb 27, 2016 5:26 am
- Location: Australia
Post
by LNR » Sun Oct 15, 2017 3:59 am
Great little wagon. Rather concerned about the serious industrial accident in the background though. That bloke must be in some pain.
Grant.
-
FWLR
- Driver
- Posts: 4290
- Joined: Sat Aug 05, 2017 9:45 am
- Location: Preston, Lancashire, UK
Post
by FWLR » Sun Oct 15, 2017 8:16 am
Really nice finish to it Peter, love to have one myself...how much...lol.
-
markoteal
- Trainee Driver
- Posts: 763
- Joined: Mon Apr 18, 2016 6:23 pm
- Location: Yorkshire
Post
by markoteal » Sun Oct 15, 2017 6:24 pm
LNR wrote: βSun Oct 15, 2017 3:59 am
Great little wagon. Rather concerned about the serious industrial accident in the background though. That bloke must be in some pain.
Grant.
LOL - another riveting episode on the Garden Railway Forum!
Where did I put that uncoupler?
-
bazzer42
- Driver
- Posts: 1215
- Joined: Sun Nov 25, 2012 1:37 pm
- Location: Forest of Dean
Post
by bazzer42 » Sun Oct 15, 2017 8:58 pm
- 1508097200378826555903.jpg (751.84 KiB) Viewed 5690 times
- 15080972646892133289510.jpg (762.4 KiB) Viewed 5690 times
Pleased with number 23, so much so she has been granted talisman brass skip couplings
Apologies for poor Joe, I took him to casualty and a few eyebrows were raised when I told them he fell and the brass rod accidentally inserted itself into his bottom. Could happen to anyone.
What to do with the third kit.?
-
FWLR
- Driver
- Posts: 4290
- Joined: Sat Aug 05, 2017 9:45 am
- Location: Preston, Lancashire, UK
Post
by FWLR » Mon Oct 16, 2017 5:57 am
-
bazzer42
- Driver
- Posts: 1215
- Joined: Sun Nov 25, 2012 1:37 pm
- Location: Forest of Dean
Post
by bazzer42 » Tue Oct 17, 2017 8:58 pm
[attachment=0]15082700776151247731537.jpg[/attachment]
Number 24 is underway and decided to add a sliver of balsa square between the top and bottom chassis to create a girder look. Some dings in the wood with my heavy handed razor sawing but nothing a blob of wood glue and iron filings won't sort.
-
Attachments
-
- 15082700776151247731537.jpg (809.09 KiB) Viewed 5652 times
-
LNR
- Driver
- Posts: 1542
- Joined: Sat Feb 27, 2016 5:26 am
- Location: Australia
Post
by LNR » Wed Oct 18, 2017 1:40 am
These are going to make up a fine looking train when all together.
Grant.
Who is online
Users browsing this forum: No registered users and 17 guests